LG
Multi F R32 · 2 zones
KUMXB181A + two ductless indoor units · AHRI 214848481
View the product pageThe gist
Two neighbouring houses, two 18,000 BTU LG multi-zones: the Multi F R32 and the Multi F LGRED. What their AHRI certificates say about consumption and capacity in extreme cold, the estimated cost in Montréal, and what depends on the house rather than the unit.
Same brand, same 18,000 BTU/h size, two wall heads on each side. Yet the electricity bill can differ from one house to the next. Here is what the AHRI certificates of these two LG systems say about their consumption, what they show in extreme cold, and what depends on the house instead.
LG
KUMXB181A + two ductless indoor units · AHRI 214848481
View the product page
LG
KUMXA181A + two ductless indoor units · AHRI 214848473
View the product pageTwo LG R-32 outdoor units, each certified with ductless indoor units.
AirGreen estimate for the same 18,000 BTU/h zone in Montréal, at Hydro-Québec rate D, taxes included. Both heat pumps are calculated exactly the same way, with the same method as on all our comparison pages; only their certified efficiencies change. Electric baseboards serve as the reference. Both certificates give 18,000 BTU/h of cooling at 35 °C.
AirGreen method v1.1, November 9, 2026. An estimate is used to compare units under the same conditions. The actual bill depends on the house, the insulation, the settings and the use; this amount is not a promise.
The two HSPF2 Region V values are almost identical (8.17 and 8.1): for heating, the estimated gap is a few dollars per winter. Most of the difference comes from cooling, where the SEER2 values are further apart (22.5 and 20.0).
A whole season is summed up in the HSPF2. A night at −25 °C comes down to the capacity an outdoor unit can still deliver. Pick a published temperature and your house’s heat loss: each house shows what its LG system publishes at that temperature, and the share that would come from another heat source.
Estimated need = chosen heat loss × (18 − outdoor temperature) ÷ (18 − (−23.1)), the same linear assumption as the cost method. It is a scenario: actual heat loss is measured house by house, and how heat is split between the two heads is not certified. Capacities are published maximums, outdoor unit at full speed; nothing is calculated between two published points.
Two certificates with almost equal HSPF2 do not produce two equal bills. The certificate measures the unit in a laboratory; the bill measures the house, the installation and how the system is used.
“LG multi-zone” covers several series. The number on the outdoor unit’s nameplate (KUMXB181A or KUMXA181A, for example) leads to the AHRI certificate, which gives the HSPF2, the SEER2 and the capacity in extreme cold.
A house that loses less heat needs fewer hours at full power. The slider in the previous section shows it: the same heat pump covers a small heat loss much further down the thermometer than a large one.
Air must flow freely around the unit, and snow must not bury it. Minimum clearances are given in each outdoor unit’s installation manual.
A multi-zone system controls each room separately. An unused room set lower, or a steady setpoint rather than repeated swings, changes how much heat the outdoor unit is asked for.
A clogged filter reduces the head’s airflow. LG provides a washable filter on the KNUAB091A wall head; how often to clean it is in the owner’s manual.
A multi-zone certificate covers one combination of indoor units. Larger or more numerous heads than the certified combination do not change the outdoor unit’s capacity; they share it differently.
To go further on the two HSPF2 regions: HSPF2 Region IV and Region V: why two numbers.
Both certificates give a value at −15 °C, at the same temperature: 17,700 and 22,000 BTU/h maximum. Further down, they do not stop at the same point: −20 °C for the Multi F R32, −25 °C for the Multi F LGRED. In between, LG’s performance manual gives a value for the LGRED at −20 °C, outside the certificate.
At −20 °C, the Multi F R32 value comes from the certificate and the LGRED value from LG’s manual: two different sources, to be read side by side, not as a common measurement. Stated ranges in wet bulb, per LG: −4 to +64 °F for the KUMXB181A, −13 to +64 °F for the KUMXA181A.
Both outdoor units connect to the same wall head, the KNUAB091A, so the head’s features are the same on both sides. The differences are outside, in the outdoor unit.
Multi F R32: optional, accessory PQSH1203. Multi F LGRED: standard.
LG submittal for the KUMXB181A; LG Multi F LGRED engineering manual.Multi F R32: down to −10 °C (14 °F). Multi F LGRED: down to −10 °C, or −20 °C (−4 °F) with the optional ZLABGP04A/B wind baffle.
LG submittals for both outdoor units.Both: yes, in the KNUAB091A head.
LG submittal for the KNUAB091A (January 10, 2025).Both: yes, in the KNUAB091A head.
LG submittal for the KNUAB091A.Both: yes, 3M Micro Dust filter and the head’s self-cleaning function.
LG submittal for the KNUAB091A.Both: yes, after a power outage; 3-minute delay when the outdoor unit restarts, per the LGRED submittal.
LG submittals for the KNUAB091A and the KUMXA181A.Both systems use the KNUAB091A head: same figures on both sides.
Cooling and heating, at full power, per each LG submittal.
How to read these figures. dB(A) measures a noise level; the lower the number, the quieter. Each dot is a speed or mode published by LG, measured in an anechoic chamber under ISO 3745.
Why this is not a ranking. The noise you hear also depends on distance, the room and where the outdoor unit is placed.
Measurements taken by each manufacturer with its own method: read them separately, not as a ranking. Here, one manufacturer and one method.
The Multi F LGRED is taller and heavier outside: 32 27/32 in high and 147.7 lb, against 25 1/2 in and 102.7 lb for the Multi F R32. Drawn to scale from LG’s dimensions.
Per LG: at most 82 ft per head and 164 ft in total for both outdoor units; 0.22 oz of R-32 per foot beyond the pre-charged length. The exact length is measured on site.
| Installation | Multi F R32 | Multi F LGRED |
|---|---|---|
| Maximum piping length | 164 ft82 ft per head | 164 ft82 ft per head |
| Pre-charged length | 98.4 ftthen 0.22 oz per foot | 82 ftthen 0.22 oz per foot |
| Maximum height difference | 49.2 ft24.6 ft between the two heads | 49.2 ft24.6 ft between the two heads |
| Liquid – gas diametersPer head | 1/4 – 3/8 in | 1/4 – 3/8 in |
| Outdoor unit W × H × D, weight | 34 5/16 × 25 1/2 × 13 1/16 in, 102.7 lb | 37 13/32 × 32 27/32 × 13 in, 147.7 lb |
| Indoor unit, weightKNUAB091A wall head | 19.7 lb | 19.7 lb |
| Electrical protectionPer the manufacturer | MOP 20 AMCA 16.1 A | MOP 30 AMCA 22.7 A |
| DehumidificationPer KNUAB091A head | 1.28 L/h | 1.28 L/h |
| Stated heating / cooling range | −20 to 18 °C / −10 to 48 °CHeating in wet bulb (−4 to +64 °F) | −25 to 18 °C / −10 to 48 °CHeating in wet bulb (−13 to +64 °F) |
Clearances around the outdoor unit are given in the installation manual figure for each model; the LG submittals reviewed do not repeat them.
Not necessarily. The two LG systems on this page have the same HSPF2 Region IV (9.8) and almost the same HSPF2 Region V (8.17 and 8.1). With certificates this close, the gap between two bills comes mostly from the house (insulation, heat loss), the installation, the settings and maintenance. The exact series still matters in extreme cold: that is where the two certificates part ways.
Read the outdoor unit’s nameplate. KUMXB181A is the 18,000 BTU/h Multi F R32, KUMXA181A the 18,000 BTU/h Multi F LGRED. With that number, the NEEP record and the AHRI certificate give the certified values.
Its AHRI certificate 214848481 gives 22.5, against 20.0 for the Multi F LGRED (AHRI 214848473). SEER2 describes cooling over a season. The certificate does not say why; this page sticks to the values.
It is a U.S. EPA designation for heat pumps that meet performance criteria at −15 °C (5 °F). According to the ENERGY STAR database accessed on November 16, 2026, the Multi F LGRED has it and the Multi F R32 does not. Both are ENERGY STAR certified.
LG states heating down to −4 °F wet bulb for the KUMXB181A and down to −13 °F for the KUMXA181A, and publishes no capacity below that. The page therefore shows each system’s last published value, with its temperature, and invents nothing beyond it.
No. It is an estimate made with the same method for both systems, for an 18,000 BTU/h zone in Montréal. It is for comparing; the actual bill depends on the house, the settings and the use.
Yes: LG publishes combination tables for each outdoor unit (14,000 to 24,000 BTU/h of connectable capacity for the KUMXB181A, per LG’s combination manual). The certified values on this page cover ductless wall indoor units.
| Certified value | Multi F R32 | Multi F LGRED |
|---|---|---|
| Rated capacity at 35 °C | 18,000 BTU/h | 18,000 BTU/h |
| SEER2 | 22.5 | 20.0 |
| EER2 | 13.5 | 13.5 |
| HSPF2 Region IV | 9.8 | 9.8 |
| HSPF2 Region V | 8.17 | 8.1 |
| Heating at 8.3 °C (47 °F) | ||
| Min. / rated / max. capacity | 10,080 / 22,000 / 25,000 BTU/h | 10,248 / 22,000 / 24,000 BTU/h |
| COP min. / rated / max. | 5.01 / 3.60 / 3.03 | 3.00 / 3.60 / 2.80 |
| Heating at −8.3 °C (17 °F) | ||
| Min. / rated / max. capacity | 6,781 / 14,800 / 20,200 BTU/h | 7,511 / 13,900 / 23,600 BTU/h |
| COP min. / rated / max. | 3.97 / 2.83 / 2.60 | 2.50 / 2.59 / 2.56 |
| Heating at −15 °C (5 °F) | ||
| Min. / rated / max. capacity | 5,759 / 15,800 / 17,700 BTU/h | 6,262 / 19,800 / 22,000 BTU/h |
| COP min. / rated / max. | 3.67 / 2.21 / 2.30 | 2.16 / 1.85 / 2.25 |
| Coldest point on the certificate | ||
| Test temperature | −20 °C (−4 °F) | −25 °C (−13 °F) |
| Min. / max. capacity | 5,200 / 14,800 BTU/h | 4,636 / 17,830 BTU/h |
| COP min. / max. | 3.54 / 2.05 | 2.00 / 2.31 |
| Certification | ||
| Refrigerant | R-32GWP 675 (IPCC, Fourth Assessment Report) · class A2L (ASHRAE 34) | R-32GWP 675 (IPCC, Fourth Assessment Report) · class A2L (ASHRAE 34) |
| ENERGY STAR, cold climate | Yes; cold climate: no | Yes; cold climate: yes |
| AHRI certificate · NEEP record | 214848481 · 392651 | 214848473 · 392659 |
“higher” marks the higher value of the same measurement, under the same conditions. It is not a recommendation. Capacities and COP at the coldest point: two different temperatures, so nothing is highlighted.
A question about which LG series suits your house, the number of heads or the piping? Write or call us.
Data verified on November 16, 2026. Certified values: AHRI certificates published by NEEP. Declared values: LG documents cited above. Cost: AirGreen estimate, method v1.1, not a promise.
LG, Multi F, LGRED and ThinQ are trademarks of their owners. Logos and images are used only to identify the products. AirGreen is a dealer; this page is not produced, sponsored or approved by LG.
Photos: AirGreen and manufacturers, for identification. Outdoor units drawn to scale: schematic.
Does a figure look wrong? Write to us at sales@airgreen.ca.
An AirGreen advisor assesses your situation on site, free of charge, and gives you a quote within 24 hours.