THERMO 2000 BTH Ultra XL BTHULTXL24040 Commercial Electric Boiler | 40 kW - 240V

In stock

The 40 kW BTH ULTRA XL is Thermo 2000’s commercial electric boiler on 240 V single phase, for the hot-water loops of apartment buildings and businesses.

Model numberBTHULTXL24040

40 kWon 240 V single phase
136,480 BTU/hper Thermo 2000
8 US galof water in the boiler (30 L)
240 V · single phaseWall or floorLow water cut-off included
Series
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

Model numberBTHULTXL24040
ManufacturerThermo 2000
Manufacturer designationBTH ULTRA XL 2.0, 40 kW / 240 V
Output40 kW (136,480 BTU/h)
Current166.7 A
Elements8 x 5 kW, 4 stages
Max. supply wire350 MCM

40 kW of commercial heating without needing three-phase power

Thermo 2000’s XL line, in a single-phase version

The BTH ULTRA XL is Thermo 2000’s commercial line of electric boilers, which its specification document calls the BTH ULTRA XL 2.0. It runs from 40 to 72 kW, on 240 V single phase or 480/600 V three-phase. This 40 kW model is the entry point of the 240 V version: eight 5 kW elements, four stages and 136,480 BTU/h according to the manufacturer.

It is meant for owners and managers of apartment buildings, small commercial buildings or premises heated with hot water but supplied with single-phase power. Thermo 2000 also presents it as backup for a heat pump or a geothermal system.

For a Montreal apartment building

Take a building with a few apartments in Montreal, heated by a central hot-water loop and radiators in each unit. The building is supplied at 240 V single phase, like many residential buildings. The 40 kW BTH ULTRA XL draws 166.7 A there; Thermo 2000 gives a maximum supply wire size of 350 MCM, and circuit protection is set according to the electrical code.

Size matters too. The boiler measures 23 3/8 x 12 3/4 x 23 1/4 in (W x D x H), weighs 180 lb and holds 8 US gal (30 L) of water. It mounts on the wall or sits on the floor on an optional stand, which helps in a tight mechanical room. Its water connections are 1 1/2 in male NPT, and its maximum working pressure is 30 psi (207 kPa).

Safety and controls

In a building shared by several households, safety comes first. Thermo 2000 includes a low water cut-off with test button and indicator lights, a 30 psi (ASME) relief valve, two limit controls and fuses. The T2 UltraSmart controller modulates output based on demand and water temperature based on the supplied outdoor sensor; warm weather shutdown is set within a 0 to 105 °F range. Boost mode and pump purge round it out.

Our installation

It all starts with a free estimate: a survey of the panel, the loop, the emitters and, where applicable, the boiler being replaced. The written quote then specifies the boiler and the parts to plan for, including the circulator and the expansion tank, which are not on the list of supplied items. Our technicians install the boiler, connect the piping and the circuit, fill and purge the loop, then set up the controller and the outdoor sensor. Thermo 2000 covers the tank for 10 years (limited warranty, closed-loop heating) and the electrical and mechanical components for 2 years (parts and accessories).

AirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work.

Let’s talk about your building

In Montreal, Laval, Longueuil, on the North Shore and on the South Shore, the estimate is free and the quote is in writing. Financing is available.

01 · What it is for

A 40 kW commercial boiler on single-phase service

The BTH ULTRA XL is Thermo 2000’s commercial line of electric boilers. This 40 kW, 240 V single-phase model heats the hot-water loop of buildings that have no three-phase power.

  • Apartment buildings heated by a central hot-water loop
  • Small commercial buildings on 240 V single-phase power
  • Tight mechanical rooms, with wall or floor mounting
  • Electric backup for a heat pump or a geothermal system
Low water cut-offIncluded, with test button and indicator lights, per Thermo 2000.
Eight 5 kW elementsControlled in four stages, with output modulation based on demand.
Wall or floorA 23 3/8 x 12 3/4 x 23 1/4 in cabinet (W x D x H) that mounts on the wall or sits on an optional stand.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

ManufacturerThermo 2000
SeriesBTH ULTRA XL
Manufacturer designationBTH ULTRA XL 2.0, 40 kW / 240 V
TypeCommercial electric hot-water boiler, wall or floor installation (optional stand)
Output40 kW
Output in BTU/h136,480 BTU/h
Power supply240 VAC, 60 Hz, single phase
Current166.7 A
Max. supply wire size350 MCM
Heating elements8 x 5 kW
Stages4
Water volume8 US gal (30 L)
Water connections1 1/2 in male NPT (inlet/return and outlet/supply)
Relief valve and drain connections1 1/2 in MPT reduced to 3/4 in FPT
Max. working pressure30 psi (207 kPa)
Relief valve30 psi (ASME), supplied
Temperature range50 °F to 190 °F
Low water cut-offIncluded (test button and indicator lights)
ControllerT2 UltraSmart: backlit display, output modulation based on demand, water temperature modulation by outdoor sensor, warm weather shutdown (0 to 105 °F range), Boost mode, pump purge, 24 V
Outdoor sensorSupplied
Insulation2 in fibreglass (specification document)
Dimensions (W x D x H)23 3/8 x 12 3/4 x 23 1/4 in
Weight180 lb
Manufacturer warrantyThermo 2000: 10-year limited warranty on the tank (closed-loop heating, residential and commercial); 2 years on electrical and mechanical components (parts and accessories)
Model numberBTHULTXL24040
03 · Before installing

What to know before installing

  • 240 V single-phase, 60 Hz power: 166.7 A, per Thermo 2000. The building’s electrical service must be able to carry this load.
  • Maximum supply wire size given by Thermo 2000: 350 MCM. Circuit protection is set according to the electrical code.
  • The boiler weighs 180 lb and holds 8 US gal (30 L) of water: the wall or the floor stand must be planned accordingly.
  • For floor mounting, the stand is an option.
  • The list of supplied items includes neither a circulator nor an expansion tank: the quote specifies them.
In the box
  • 30 psi relief valve (ASME)
  • Drain valve
  • Outdoor sensor
  • Low water cut-off
  • Temperature and pressure gauge
  • Fittings and reducers
04 · Documents

Manufacturer documents

05 · See also

Explore the range

Same category
Electric boilers
See all
Same brand
THERMO 2000
See all
06 · Questions

Frequently asked questions

Is this boiler suited to an apartment building?

Thermo 2000 presents it as a commercial boiler. On 240 V single phase, it is aimed at buildings without three-phase power, as many apartment buildings are. We assess the building’s heat load before confirming the size.

How much current does it draw?

166.7 A on 240 V single phase, per Thermo 2000. Circuit protection and conductor size are set according to the electrical code, up to a 350 MCM supply wire at most.

What safety devices does it have?

A low water cut-off with test button and indicator lights, a 30 psi (ASME) relief valve, two limit controls and fuses, according to Thermo 2000’s documents.

Can it be installed on the floor?

Yes. Thermo 2000 provides for wall or floor installation, with an optional stand for floor mounting.

What is the manufacturer’s warranty?

Thermo 2000 offers a 10-year limited warranty on the tank (closed-loop heating, residential and commercial use) and 2 years on electrical and mechanical components (parts and accessories).

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

A 40 kW BTH ULTRA XL, installed by AirGreen

Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 19, 2026.