THERMO 2000 BTH Ultra XL BTHULTXL60060 Commercial Electric Boiler | 60 kW - 600V
Thermo 2000 BTH ULTRA XL 60 kW on 600 V three-phase: a commercial electric boiler with twelve 5 kW elements for schools, offices and institutional buildings.
Model numberBTHULTXL60060
514 316-2973 · sales@airgreen.ca
Quick facts
A 60 kW commercial electric boiler for buildings on 600 V
The 60 kW size on 600 V
In its BTH ULTRA XL commercial line, which the specification document names the BTH ULTRA XL 2.0, Thermo 2000 offers 48, 60 and 72 kW models on 600 V three-phase. The 60 kW model brings together twelve 5 kW, 347 V elements, controlled in four stages, and produces 204,720 BTU/h according to the manufacturer. On 600 V, it draws 57.7 A.
It suits schools, community centres, municipal buildings and office buildings heated by a hot-water loop, in new construction as well as replacements. Thermo 2000 also presents it as backup for a heat pump, a geothermal or a solar system.
Replacing the boiler of a Laval school
Take a school in Laval whose old floor-standing electric boiler has been feeding radiators for decades. The 60 kW BTH ULTRA XL can take its place: it sits on the floor on an optional stand or mounts on the wall, which frees up space in the mechanical room. The cabinet measures 23 3/8 x 12 3/4 x 23 1/4 in (W x D x H), weighs 180 lb and holds 8 US gal (30 L) of water.
The connection is made in 1 1/2 in male NPT, for a maximum working pressure of 30 psi (207 kPa); existing piping is adapted as needed. On the electrical side, Thermo 2000 gives a supply wire of up to 2/0, and circuit protection is set according to the electrical code. The work is scheduled outside class hours or during a break.
Controls and safety
The T2 UltraSmart controller modulates output based on demand and water temperature based on the supplied outdoor sensor. It stops heating in mild weather, within a 0 to 105 °F range, and offers a Boost mode and a pump purge. Thermo 2000 includes a low water cut-off with test button and indicator lights, a 30 psi (ASME) relief valve, two limit controls and fuses; its specification document also mentions 2 in fibreglass insulation.
The installation steps
- Free on-site estimate: 600 V panel, loop, emitters and the old boiler’s nameplate.
- Written quote: boiler, floor stand where applicable, circulator and expansion tank, which are not among the supplied items.
- Removal of the old unit, installation of the new boiler, connection of the piping and the electrical circuit.
- Filling, purging, connecting the outdoor sensor and setting up the controller with the building manager.
Thermo 2000 covers the tank for 10 years (limited warranty, closed-loop heating) and the electrical and mechanical components for 2 years (parts and accessories). AirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work.
Ask for your quote
We work in Montreal, Laval, Longueuil, on the North Shore and on the South Shore. The estimate is free, the quote is in writing and financing is available.
60 kW on 600 V for institutional and commercial buildings
The 60 kW model sits in the middle of the 600 V version of the BTH ULTRA XL. It heats a closed hot-water loop in buildings with a 600 V three-phase service.
- Schools, community centres and municipal buildings on 600 V power
- Office buildings heated by hot-water radiators or baseboards
- Replacing an old floor-standing commercial electric boiler
- Electric backup for a heat pump, a geothermal or a solar system
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- 600 V three-phase, 60 Hz power (347 V elements): 57.7 A, per Thermo 2000. Circuit protection is set according to the electrical code.
- Maximum supply wire size given by Thermo 2000: 2/0.
- 1 1/2 in male NPT water connections and a maximum working pressure of 30 psi (207 kPa): existing piping is adapted as needed during a replacement.
- The list of supplied items includes neither a circulator nor an expansion tank: the quote specifies them.
- 30 psi relief valve (ASME)
- Drain valve
- Outdoor sensor
- Low water cut-off
- Temperature and pressure gauge
- Fittings and reducers
Manufacturer documents
Explore the range
Electric boilersSee allSame brand
THERMO 2000See all
Frequently asked questions
Can it replace an old floor-standing boiler?
Yes. Thermo 2000 provides for wall or floor installation, with an optional stand. We record the old boiler’s nameplate and the piping before confirming the output and the mounting.
How much current does it draw?
57.7 A on 600 V three-phase, per Thermo 2000, with a supply wire of up to 2/0. Circuit protection follows the electrical code.
How does the boiler adjust its output?
The T2 UltraSmart controller modulates output based on demand over four stages, and water temperature based on the supplied outdoor sensor. Warm weather shutdown is set within a 0 to 105 °F range.
What does Thermo 2000 supply with the boiler?
A 30 psi (ASME) relief valve, a drain valve, the outdoor sensor, the low water cut-off, a temperature and pressure gauge, and fittings and reducers.
What is the manufacturer’s warranty?
A 10-year limited warranty on the tank (closed-loop heating, residential and commercial) and 2 years on electrical and mechanical components (parts and accessories).
A 600 V, 60 kW BTH ULTRA XL, installed by AirGreen
Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 19, 2026.
