PTAC Air Conditioner DURASTAR | 9,000 BTU - R410A

In stock
SKU: DRPTAC09Y41G1A
8,800 BTU/h actual350 to 400 sq ftHeater up to 3.5 kW
Talk to an HVAC technician · 514 316-2973
Electric heat up to 3.5 kWStandard 42 × 16 in sleeve10-year compressor warranty
01 · Your room

Is it the right size for this room?

Durastar publishes a 350 to 400 sq ft range for this unit. Choose your room's area.

It's the right size.

For a 350 to 450 sq ft room, this is the range Durastar publishes for this unit: 8,800 BTU/h of cooling and a heater of up to 3,535 W when the cold calls for it.

Application range published by Durastar for each capacity in the lineup. Our estimator confirms the exact area on site.

02 · Performance

What it does, in numbers

8,800BTU/h
Cooling at 230 V8,500 at 208 V, the supply in many buildings.
3,535W
Maximum electric heater2,897 W at 208 V. It does all the heating.
12.8EER
Cooling efficiencyThat's 688 W drawn at 230 V for 8,800 BTU/h.
What it costs per yearTypical 375 sq ft room · Rate D
Summer · cooling

$15.33

Cooling, all summer

Less than a 60 W light bulb

Bulbs left on day and night for a year. Cooling: 5 h a day for 40 days, the assumption used by Hydro-Québec's air-conditioning calculator. Same calculation for every line: wattage × hours × 11.142 ¢/kWh.

Winter · heating

≈$298

Heating, all winter

Typical 375 sq ft room with one exterior wall, in Montréal: 2,679 kWh of heat per winter (Environment Canada 1991–2020 climate normals).

≈ $314 for the year, before tax. Winter is 95% of it. If your home stays in the first tier of Rate D in summer (7.065 ¢/kWh), cooling drops to $9.72.

$0.08/h
One hour of cooling
$0.39/h
One hour on the 3.5 kW heater

Capacities and currents: Durastar PTAC/PTHP R-410A submittal, form V1.0_12.22 (December 2022). Power draw: 688 W in cooling (8,800 BTU/h ÷ EER 12.8), 3,535 W on the 3.5 kW heater. Hydro-Québec Rate D in effect since April 1, 2026: 11.142 ¢/kWh second tier, before tax.

03 · Good to know

What you should know about this one

Published, verifiable facts, not brochure claims.

8,800What it really delivers in cooling

The name says 9,000 BTU: that's the unit's size class. Durastar publishes 8,800 BTU/h at 230 V, and 8,500 at 208 V, the supply in many buildings. Better to read it here than on the spec sheet after installation.

3,535 WThe heater that heats the room

The "G" in DRPTAC09Y41G1A means a 3.5 kW heater: 3,535 W (10,900 BTU/h) at 230 V, 2,897 W at 208 V, on the 6-20P plug of the LCDI cord supplied. It heats the room all winter.

47.5 dBThe noise at low speed

47.5 dB(A) at low speed, 51 at high speed, as published by Durastar. In a bedroom, that's the number that decides the complaints: the unit runs at night, two metres from the bed.

1.18Pints of water it removes per hour

The dehumidification Durastar publishes in cooling mode: 1.18 pints per hour. It's what keeps a room comfortable in summer without it turning clammy.

61 cfmFresh air through the vent

With the vent open, Durastar publishes 61 cfm of outside air at high speed. Close it to keep all the heat or the cool air in the room.

0 °CRoom freeze protection

In an unoccupied room, Durastar provides automatic freeze protection at 32 °F (0 °C): the fan and the heater restart on their own.

Replacement

It fits the standard wall sleeve

Durastar designs this PTAC for the standard 42 × 16 in wall sleeve; the sleeve and grille are sold separately. Our estimator checks the ones in place before ordering.

42 × 16
inches, standard size
04 · Installation

What it needs on site

42 × 16 in sleeveIndustry-standard size
14 ¾ in sleeveDRPTACWS foldable sleeve
Dedicated 20 A circuitFor the 3.5 kW heater (NEMA 6-20P plug)
104.1 lbUnit weight

In a replacement, we check the outlet and the breaker first: they set the heater size you can use. Our estimator confirms the sleeve, the outlet and the slope before ordering.

Complete spec sheetData and cited sources
Model
DRPTAC09Y41G1A
Cooling capacity (208/230 V)
8,500 / 8,800 BTU/h
Electric heater
3.5 kW (2,897 / 3,535 W at 208/230 V)
EER
12.8
Current — cooling (208/230 V)
3.2 / 3 A
Power — cooling (208/230 V)
665 / 690 W
Airflow (low/high)
313 / 380 cfm
Sound level (low/high)
47.5 / 51 dB(A)
Dehumidification
1.18 pints/h
Published cooling area
350 to 400 sq ft
Dimensions
42 × 21 × 16 in (W × D × H)
Net weight
104.1 lb
Refrigerant
R-410A · 23.99 oz
Power supply
208/230 V · 1 ph · 60 Hz
Spec sheet (French)
PDF
Spec sheet (English)
PDF

All values: Durastar PTAC/PTHP R-410A submittal, form V1.0_12.22 (December 2022). Operating cost: cooling at 688 W for 200 h per summer; heating estimated for a typical 375 sq ft room (2,679 kWh of heat per winter); at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.

05 · In the same family

The neighbouring models

Talk to an HVAC technician before you choose

We check the existing sleeve, the outlet and the heater size, and give you an installed price. For a building, we order the same series for every room.

9 000 BTU par salle, et un réglage qui ne suit pas celui d'à côté

Une clinique de Saint-Eustache qui a converti deux salles en postes de téléconsultation occupés toute la journée s'est heurtée à une évidence : une salle où quelqu'un parle huit heures d'affilée devant un écran ne demande pas la même chose que la salle d'examen voisine, utilisée vingt minutes par patient. Le Climatiseur PTAC DURASTAR | 9 000 BTU - R410A traite une pièce à la fois, avec son propre réglage et son propre horaire.

DuraStar ne publie pas de certificat AHRI pour cet appareil ; les valeurs ci-dessous sont celles de sa fiche technique. Ce monobloc n'est pas admissible aux programmes d'aide d'Hydro-Québec, ce qui explique le 0 $ inscrit à la fiche.

Les chiffres de ce modèle au R-410A

  • Climatisation : 9 000 BTU/h
  • Réfrigérant : R-410A
  • Alimentation : 220 V, sur circuit dédié
  • Niveau sonore intérieur : 47,5 et 51,0 dB(A)
  • Caisson : 42 x 21 x 16 po, modèle DRPTAC09Y41G1A

Une salle, un caisson, un réglage

La valeur qui décide ici est 47,5 dB(A), le plus bas des deux niveaux publiés pour ce modèle. Dans une pièce où l'on s'entend parler, ce réglage est celui que l'appareil tiendra la majeure partie du temps ; l'autre sert à rattraper une pointe de chaleur entre deux rendez-vous. Le calcul de charge se fait salle par salle, parce que les équipements et le nombre de personnes changent d'une porte à l'autre.

Saint-Eustache, fin de saison : le monobloc d'une clinique pendant l'hiver

La grille et le manchon quand la neige s'accumule

La grille extérieure se pose au-dessus de la ligne de neige, en tenant compte du banc laissé par le déneigement du stationnement de la clinique. Le manchon mural reçoit sa pente vers l'extérieur et son pourtour est calfeutré serré : un caisson mal scellé se signale dès le premier vent de novembre, par un filet d'air froid au ras du plancher.

Le cordon, la prise et l'arrêt de saison

L'alimentation est en 220 V sur un circuit dédié, avec la prise à portée du cordon. Une salle qui ne climatise plus se coupe au disjoncteur pour l'hiver, et le circuit est identifié au panneau au nom de la salle. Nous montrons le geste au responsable des lieux le jour de la mise en service.

Entre deux rendez-vous : bruit, filtre et condensat

  • Un délai de trois minutes au redémarrage protège le compresseur.
  • De l'eau s'écoule côté extérieur par temps humide : c'est le condensat.
  • Le ventilateur tourne encore après l'arrêt du compresseur.

Une odeur de brûlé, un disjoncteur qui saute, un code d'erreur récurrent ou de l'eau côté salle commandent l'arrêt et un appel à notre service de réparation. Le filtre se nettoie aux deux semaines et un entretien CVAC annuel reprend serpentins, écoulement et raccords.

AirGreen, en milieu clinique

AirGreen est une entreprise familiale de Montréal, active depuis plus de quinze ans à Montréal, Laval, Longueuil, sur la Rive-Nord et la Rive-Sud, avec une assurance responsabilité de 5 000 000 $. Nos réalisations comprennent des locaux de santé où les coupes se font en soirée, hors des heures de consultation.

Réservez votre estimation gratuite pour le Climatiseur PTAC DURASTAR | 9 000 BTU - R410A. Nous relevons la charge de chaque salle, plaçons le caisson hors de l'axe du poste de travail et identifions le circuit au nom de la pièce.

Garantie : 10 ans sur le compresseur, 10 ans sur les pièces et 6 ans sur la main-d’œuvre, directement du distributeur.