Wall Controller GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 | Montreal, Laval, Longueuil, South Shore & North Shore
When a building has several indoor units, the control must be clear for the occupants and complete for the manager.
Quick facts
When a building houses several indoor units, the control has to stay simple for the people who occupy it and complete for the person who manages it. The GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 touch screen wall controller meets both requirements, and it is the same part as the model sold under the Fujitsu AIRSTAGE name: Fujitsu General Limited became GENERAL Inc. on January 1, 2026, without touching the product. For everyday use, it offers a large backlit LCD touch screen; for advanced settings, a service menu reserved for maintenance. Its natural place: offices, shops, server rooms and residential buildings equipped with AIRSTAGE, not to mention homes where people insist on a reliable wall control.
On the manufacturing side, nothing has moved: acquired by Paloma Rheem Holdings, the company keeps its factories, its AIRSTAGE range and its model numbers; only the name changes to GENERAL, while the Fujitsu brand is phased out little by little. Until the transition ends, both labels share the shelves. AirGreen, an authorized GENERAL and Fujitsu AIRSTAGE dealer, sells this GENERAL model alongside the same part under the Fujitsu AIRSTAGE brand.
One controller for an entire 2-wire AIRSTAGE network
On the compatibility side, the UTY-RNRUZ5 targets two families: 2-wire AIRSTAGE H-Series indoor units and TLAV, TLAV1, TLAV2, KSA1 and KSA2 DRV (VRF) systems. Most non-wall-mounted units accept it directly: slim ducts, cassettes, ceiling units and others. A wall-mounted unit, on the other hand, requires the UTY-TWRXZ2 communication kit. A single controller runs up to 16 indoor units, grouped or one by one.
It is powered by the indoor unit, at 12 VDC, drawing 0.3 W at most. The connection uses a shielded, twisted, non-polarized 2-conductor cable, which makes the job easier: no need to worry about the order of the two wires, and the shielding protects data exchanges in buildings where electrical cables abound.
Six modes and detailed programming
You will find the Custom, Auto, Cool, Dry, Fan and Heat modes. The weekly timer in this series handles two schedules and up to 8 settings per day, enough to follow a shop's opening hours, an office schedule or a family's routine. The setpoint ranges from 64 to 88 °F in cooling and from 60 to 88 °F in heating, and the screen also shows the room temperature.
If the indoor unit has an occupancy sensor, as some models do, the controller gives access to its settings: the unit then slows down in an empty room. Emergency heat control is also among the functions.
Designed for managers and technical rooms
Everything that belongs to the technician or the maintenance lead is grouped in the service menu. The lead-lag and standby (back-up) mode alternates two units and hands over to the second one if the first stops. It is the classic setup for server rooms, electrical rooms and telecommunications rooms, where cooling is not allowed to falter. With restricted access, only managers and the maintenance team see all the functions; occupants are limited to the settings intended for them.
Specifications in detail
- Type: touch screen wall controller, wired, 2-wire
- Display: large backlit LCD touch screen with room temperature display
- Compatible systems: 2-wire AIRSTAGE H-Series indoor units; DRV TLAV, TLAV1, TLAV2, KSA1 and KSA2
- Connection to a wall-mounted unit: through the UTY-TWRXZ2 communication kit
- Units controlled: up to 16 indoor units, as a group or separately
- Modes: Custom, Auto, Cool, Dry, Fan, Heat
- Programming: weekly timer with two schedules, 8 settings per day
- Setpoint ranges: 64 to 88 °F in cooling; 60 to 88 °F in heating
- Occupancy sensor: settings available with some indoor unit models
- Service functions: service menu, lead-lag and standby, emergency heat, restricted access
- Power supply: 12 VDC drawn from the indoor unit, 0.3 W max.
- Cable: 2 shielded, twisted conductors, non-polarized
- Connectivity: wired communication over 2 wires
- Dimensions and weight: about 4-3/4 x 4-3/4 in.; about 4 oz
Where it sits in the AIRSTAGE family
The UTY-RNRUZ5 occupies the middle of the range, between the UTY-RSRYZ1, very compact and limited to basic functions, and the KAGAMI UTY-RVRU, whose colour screen focuses first on the look of living spaces. Its strength is management: detailed schedules, a service menu, standby functions and restricted access. When a system has to be handed over to several occupants without losing control of the settings, it is the one we recommend in this family.
At home, it suits a ducted heat pump or AIRSTAGE cassettes well, since a single wall controller replaces several remotes. In an office building, it brings the units on one floor together under a single control, with schedules matched to occupancy hours and settings that staff cannot push beyond what the manager allows.
Professional installation by AirGreen
First, our technicians check the type of indoor unit, the length of the cable run and, for a wall-mounted unit, whether a UTY-TWRXZ2 kit is needed. They then pull the shielded, twisted cable, mount the controller in a spot representative of the room and connect the unit addressing when several units are controlled as a group. Last comes the configuration of the timer, the modes offered and the access levels. In a technical room, the lead-lag and standby sequence is set and tested before we leave.
Comfort and savings when it is cold
For a shop or an office, the weekly timer avoids heating empty premises at night and on weekends. In a house heated by a heat pump, moderate setpoint reductions are better than full shutdowns: the system's comfort and efficiency hold up better in cold weather. And if the indoor unit has an occupancy sensor, little-used rooms consume less without anyone having to think about it.
Maintenance
The indoor units' filters should be cleaned regularly, and more often in busy premises. The screen is wiped with a soft, dry cloth, with no liquid product. At the annual maintenance visit, our technicians go through the service menu to review the parameters and operating histories.
Why AirGreen
At AirGreen Inc., air conditioning and heating have been a family business for more than 15 years; the company holds an RBQ licence and runs a showroom in Boucherville. We install AIRSTAGE systems in homes as well as in businesses, and we set up the control according to how your spaces are really used.
For the sale and installation of the GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 touch controller, reach out to AirGreen. Our technicians cover Montreal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
How it connects to the unit
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
The GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Products that go with the GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01CompatibilityExact indoor unit model checked before ordering.
- 02CableControl cable run through the wall or a raceway.
- 03MountingController mounted at a representative height.
- 04SettingsModes, setpoints and timer.
- 05TestHeating and cooling tested with you.
GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5
Short answers, no detours.
What does the GENERAL AIRSTAGE Touch Panel UTY-RNRUZ5 work with?
According to the manufacturer’s sheet: 2-wire AIRSTAGE H-Series indoor units; DRV TLAV, TLAV1, TLAV2, KSA1, KSA2.
Does it work with another brand?
A wall controller is designed for its own brand’s units and the series listed on its sheet. We check your exact unit model before ordering.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
1 year, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.


