Adjustable Galvanized Round 90° Elbow
The round elbow you set on site, from a slight bend to a full 90° turn.
AirGreen codeAG-VC-00201
514 316-2973 · sales@airgreen.ca
Quick facts
The adjustable galvanized round elbow changes the direction of a round duct at the angle you need, up to 90°. Its sections rotate on one another: you set it on site, at installation, instead of ordering a different elbow for each turn.
The elbow that adapts to the actual route
In a basement or attic, a duct often has to get around a beam, a pipe or a brace, and two runs are rarely perfectly aligned. The adjustable elbow takes up these offsets. It is also used for the full 90° turn that brings a branch to a floor register or to a wall hood.
Available sizes
The elbow is available in 4, 5, 6, 7, 8, 10 and 12 in, as well as a combined 14 in / 16 in size for main ducts. The latter is a single variant: specify the exact diameter when ordering. The size is the nominal diameter of the pipe to be connected.
Adjustment and sealing
- Set the angle dry, by holding the elbow in place between the two runs.
- Lock each swivel joint with a sheet metal screw so the angle no longer moves.
- Seal the swivel joints and both connections with aluminum tape or duct sealant.
- Avoid putting several elbows in a row: every turn slows the air.
On an exhaust duct, slope the run toward the outside after the last elbow so condensation does not flow back toward the unit.
Installed by AirGreen in Greater Montréal
We install ducts and elbows as part of our ventilation and forced-air work in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01, subcategory 15.8 Ventilation. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the diameter and quantity.
One elbow for every angle on the job
Its sections swivel on each other: you set the exact angle while installing, instead of hunting for the right elbow.
- 90° turns along a wall, a joist or a ceiling
- Getting around a beam, a plumbing pipe or blocking
- Small offsets between two ducts that are not perfectly in line
- Connecting a boot or a wall hood to the branch
8 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Dimensions | AirGreen code |
|---|---|
| 4 in | AG-VC-00201 |
| 5 in | AG-VC-00202 |
| 6 in | AG-VC-00203 |
| 7 in | AG-VC-00204 |
| 8 in | AG-VC-00205 |
| 10 in | AG-VC-00206 |
| 12 in | AG-VC-00207 |
| 14 in / 16 in | AG-VC-00208 |
Nominal duct diameter. For the 14 in / 16 in size, state the exact diameter when ordering.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Choose the elbow with the same nominal diameter as the pipe.
- Set the angle before installing, then lock it with a sheet-metal screw on each swivel joint.
- Seal the swivel joints with foil tape or mastic: they are leak points.
- The 14 in / 16 in size is a single variant: state the diameter you need when ordering.
You may also need
Galvanized Round Pipe – 60 in Length
Galvanized Tapered Reducer
Galvanized Angled Boot
Gust-Resistant Wall Hood with Gasketed Damper
Galvanized Round Backdraft Damper
Galvanized Round End Cap
Cleats for Galvanized Duct (C and S)
Galvanized Oval Duct – 60 in LengthVentilation ductsSee all
Frequently asked questions
How do I set the angle?
Turn the sections against each other until you reach the angle you want, then fasten them with a sheet-metal screw and seal the joints.
Can it be used as a 45° elbow?
Yes. That is the point of an adjustable elbow: it gives any angle up to 90°, 45° included.
Why seal a new elbow?
Swivel joints let air through. Foil tape or mastic on each joint keeps the air in the duct.
Can you install it?
Yes. We install ducts and fittings as part of our ventilation and forced-air jobs across Greater Montréal.
Elbows fitted to your duct route
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.
