Venmar by Broan HRV Air Exchanger HRV110 | Montreal, Laval, Longueuil, South Shore and North Shore
Is it the right size for your home?
It delivers 100 cfm net, enough to ventilate 1,200 to 1,900 sq ft. Choose your home's living area.
It's the right size.
For a 900 to 1,500 sq ft home, about 63 cfm of air needs to be renewed continuously. This unit delivers 100 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.
Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.
What it does, in numbers
$25.38
Electricity per year
Less than a 60 W light bulb
Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.
Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 60% at 64 cfm.
Airflow and efficiency at 0 °C and −25 °C: HVI directory, Section III. Cost: 26 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
3,000 ft²Designed for homes of 3 bedrooms or fewer
Venmar targets homes with 1 to 3 bedrooms and up to 3,000 sq. ft. of living area. The included wall control (40 ft cable) has an AUTO mode that sets ventilation according to the outdoor temperature.
DampersMotorized dampers: no backdraft damper to add
Built-in motorized dampers mean no additional backdraft dampers are needed in the ducts. The guide also advises against an exhaust hood with a non-return damper, which can freeze in winter.
60%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 64 cfm.
DamperIt defrosts without depressurizing the house
In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.
HRVIt recovers heat, not moisture
Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, the problem is almost always too much humidity, not too little.
2505232Its HVI certification number
Listed in Section III of the Home Ventilating Institute's certified products directory. Anyone can check it, and it's the first condition for the Rénoclimat grant.
−12 cfmWhat the ducts cost it
Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 112 to 100 cfm. Most spec sheets show only the first number, precisely because it looks better.
26 WMeasured at the airflow it actually runs at
Its 68% at 0 °C is certified at 64 cfm, the continuous airflow of a typical home. At that setting it draws 26 W, or about 228 kWh a year.
1 yearThe core warranty
The core does the work and is the most expensive part to replace. Motors and parts: 1 year. We register the warranty in your name at commissioning.
5 inWhat it needs on site
5 in ducts, top connection and a condensate drain. It weighs 35 lb, and it needs enough clearance to slide the core out once a year.
Rénoclimat: $500 to install or replace an HRV or ERV
First condition met: HVI Section III certified, No. 2505232. Second: your EnerGuide rating must improve between the two evaluations. Québec warns that an air exchanger installed on its own can increase a home's energy use; that's why we balance it to the calculated airflow rather than running it at full speed.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- Net airflow at 0.2 in. w.g.
- 112 cfm
- Net airflow at 0.4 in. w.g.
- 100 cfm
- SRE at 0 °C (64 cfm)
- 68%
- SRE at −25 °C (64 cfm)
- 60%
- ASE at 0 °C
- 72%
- Power draw
- 26 W
- Efficacy
- 2.4 cfm/W
- Type
- HRV
- Connection
- Top ports
- Duct collars
- 5 in
- Condensate drain
- Required
- Defrost cycle
- Recirculation (motorized damper)
- Filters
- Washable MERV 8 filter and exhaust filter supplied; HEPA membrane filter V25000 available as an option
- Dimensions (L × D × H)
- 21 × 16.13 × 21.56 in
- Weight
- 35 lb
- Power supply
- 120 V
- HVI certification (Section III)
- 2505232
- Warranty — core
- 1 year
- Warranty — motors
- 1 year
- Warranty — parts
- 1 year
Net airflow, efficiency at 0 °C and −25 °C, and power draw: Home Ventilating Institute certified products directory, Section III (HVID 2505232). Annual consumption calculated at 26 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The next model down and up
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
Venmar HRV110 – Residential Air Exchanger 131 CFM with Vertical Connection
At AirGreen, we know that a comfortable home depends not only on a good heating or cooling system. In modern Quebec residences, often very well insulated, indoor air quality becomes an essential element of daily comfort. Without adequate ventilation, air can quickly become stagnant, too humid, filled with odors, CO₂, or fine particles.
The Venmar HRV110 is a HRV — heat recovery ventilator designed to ensure effective air renewal in the home while recovering some of the heat contained in the exhausted air. With its flow rate of 131 CFM / PCM at 0.4”, vertical connection, maximum sensible recovery efficiency of 68.0%, and recirculation defrost cycle, this model represents a reliable solution to improve indoor comfort in homes in Montreal, Laval, Longueuil, the North Shore, and the South Shore.
The Venmar HRV110 is an excellent choice for homeowners looking for a compact, efficient air exchanger well suited to the realities of Quebec’s climate. It allows fresh air to enter the home, expels stale air, and helps maintain a healthier and more comfortable indoor environment.
In Quebec, homes are often built or renovated to be very airtight. This insulation helps reduce heat loss during winter but also limits natural air renewal. The result: moisture, cooking odors, household contaminants, and stale air can become trapped inside.
The Venmar HRV110 helps address this issue by providing controlled mechanical ventilation. It removes indoor air laden with moisture and pollutants, then introduces fresh air from outside. At the same time, it recovers some of the heat from the outgoing air to reduce energy losses.
Unlike simple mechanical ventilation, a Venmar HRV does not just expel air from the house. It recovers some of the energy already used to heat the indoor space. This is a much smarter solution for homes located in cold climates like Greater Montreal.
The Venmar HRV110 is designed to offer a good balance of performance, simplicity, compact size, and ease of integration. With a capacity of 131 CFM, it is suitable for various residential applications where reliable and consistent ventilation is needed.
Its vertical connection is especially convenient when ducts need to be directed upward or when the existing mechanical setup favors a top outlet. This design can facilitate installation in a basement, mechanical room, technical space, or when replacing an old air exchanger.
Choosing the right air exchanger always depends on several factors: house size, number of occupants, insulation level, humidity rate, duct configuration, and actual ventilation needs. At AirGreen, we always assess these elements before recommending a model.
Main technical features of the Venmar HRV110
Here is the important information about the Venmar HRV110 model:
Model: HRV110
Type of air exchanger: VRC
Energy Star: No
Voltage: 115 V
Dimensions: 16.14 x 21.07 x 21.58 in
Manufacturer’s warranty: 5-1-0
Defrost cycle: Recirculation
Maximum sensible recovery efficiency: 68.0%
Airflow: 131.0 CFM at 0.4”
Connection: Vertical
These features make the Venmar HRV110 well suited for homes that require efficient ventilation with a compact and practical design.
With its airflow of 131 CFM, the Venmar HRV110 offers a suitable capacity for various types of residences. This level of ventilation effectively renews indoor air when the unit is properly sized and installed.
An airflow that is too low may be insufficient to remove moisture, odors, and stale air. Conversely, an overly powerful unit may be unnecessarily oversized for some homes. The HRV110 therefore represents a balanced choice for many residential installations.
At AirGreen, we never recommend an air exchanger based solely on its airflow. We consider the entire home: the area, number of rooms, number of occupants, presence of a basement, humidity issues, duct configuration, and mechanical space accessibility.
The Venmar HRV110 offers a maximum sensible recovery efficiency of 68.0%. This performance indicates that the unit can recover a significant portion of the heat contained in the exhausted air before releasing it outside.
In winter, this heat recovery is particularly useful. It allows fresh air to enter while limiting heat loss. The result is a better-ventilated, more comfortable, and more energy-efficient home.
In Quebec’s climate, good heat recovery is essential. Homes need ventilation but without wasting the energy produced by the heating system. The Venmar HRV110 HRV meets this need by combining air renewal and heat recovery.
The recirculation defrost cycle is a very important feature for Quebec winters. When outdoor temperatures are very low, an air exchanger can be exposed to frost formation. Defrosting by recirculation helps protect the recovery core and maintain the unit’s proper operation.
This mode allows for more stable management of cold periods by temporarily recirculating indoor air to reduce frost buildup. For homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore, this feature is an important benefit to ensure reliable ventilation during the winter season.
The vertical connection of the Venmar HRV110 is also a major advantage. In many homes, air exchanger ducts are oriented upward or run through joists, basement ceilings, or a compact mechanical room. A vertical connection model can simplify duct routing and make the installation cleaner.
This configuration is especially useful when replacing an old air exchanger. If the existing ducts are already routed upward, choosing a vertical model like the Venmar HRV110 can reduce the necessary modifications and simplify integrating the new unit.
With its dimensions of 16.14 x 21.07 x 21.58 in, the Venmar HRV110 offers a compact size that facilitates installation in various residential settings. It can fit into tight mechanical spaces while providing ventilation capacity suitable for many homes.
However, it is important to allow sufficient clearance around the unit to enable access to the filters, recovery core, ducts, and internal components. A well-planned installation makes future maintenance easier and helps extend the air exchanger’s lifespan.
The Venmar HRV110 is designed to offer simple and efficient daily use. A residential air exchanger must be effective, but it also needs to be easy to understand, use, and maintain. This model fits that logic well: it provides reliable ventilation without unnecessary complexity.
Filtration is also an important element. The Venmar HRV110 is designed to help protect the system and maintain stable airflow. As with any air exchanger, regular filter maintenance is essential. Dirty filters can reduce airflow, increase motor strain, and decrease overall system efficiency.
At AirGreen, we always recommend checking and cleaning the filters according to the actual use of the unit and the manufacturer’s recommendations. A well-maintained air exchanger operates more efficiently, lasts longer, and contributes more to indoor air quality.
The standard 115 V voltage makes this model convenient for many residential installations. Of course, the electrical installation must always comply with applicable standards and be carried out safely.
The Venmar HRV110 is especially appealing to homeowners who want to improve their air quality without choosing a unit that is too large or complex. Its 131 CFM airflow, compact size, vertical connection, and recirculation defrost make it a solution suited to many Quebec homes.
The benefits of the Venmar HRV110 are numerous:
131 CFM airflow, suitable for many residential homes
Maximum sensible recovery efficiency of 68.0%
Vertical connection, convenient for many duct configurations
Recirculation defrost, suited for Quebec winters
Compact size, easy to integrate into various mechanical spaces
VRC type, ideal for recovering some of the heat from exhausted air
Standard 115 V voltage, convenient for residential installations
5-1-0 manufacturer warranty, for extra peace of mind
Reliable solution to improve indoor air quality
These advantages make the Venmar HRV110 a solid option for homeowners looking for a simple, compact, and efficient residential air exchanger.
Choosing the right air exchanger is important, but installation is just as crucial. A high-performance unit can lose much of its efficiency if it is poorly installed, unbalanced, or improperly connected. Ducts must be properly sized, grilles well positioned, and airflow correctly adjusted.
At AirGreen, we install ventilation, air conditioning, heating, and HVAC systems throughout Greater Montreal. Our team understands the realities of Quebec homes: limited mechanical spaces, finished basements, existing ducts, old air exchangers to replace, humidity issues, and specific needs depending on each property.
We serve notably Montreal, Laval, Longueuil, Boucherville, Brossard, Saint-Bruno, Repentigny, Terrebonne, Saint-Eustache, the North Shore, and the South Shore.
Our goal is simple: to provide a clean, durable installation tailored to the real needs of each home.
At AirGreen, we don’t just install a device. We analyze the entire home to propose a solution that truly matches the client’s needs. We assess the layout, accessibility, existing ducts, humidity levels, size, number of occupants, and the homeowner’s expectations.
This approach allows us to recommend a suitable air exchanger and carry out a professional installation. With AirGreen, you benefit from local expertise, reliable service, and comprehensive support before, during, and after installation.
The Venmar HRV110 is an excellent option for homeowners who want to improve their home's ventilation with a compact, reliable, and well-designed device. Thanks to its flow rate of 131 CFM, maximum sensible recovery efficiency of 68.0%, recirculation defrost, and vertical connection, it meets the needs of many Quebec residences.
In a well-insulated home, an air exchanger is often essential to maintain good indoor air quality. It helps remove stale air, reduce excess humidity, and bring in fresh air in a controlled manner.
In conclusion, the VRC Venmar HRV110 is a compact, efficient, and well-designed residential air exchanger. With its flow rate of 131 PCM / CFM, maximum sensible recovery efficiency of 68.0%, vertical connection, and recirculation defrost cycle, it represents a reliable solution to improve indoor air quality.
For homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore, this model can be an excellent choice when properly sized and installed by professionals.
At AirGreen, we pride ourselves on offering ventilation solutions tailored to the real needs of our clients. Whether replacing an old air exchanger or installing a new system, our team is ready to assist you with precision, seriousness, and professionalism.
Contact AirGreen today to learn more about installing the Venmar HRV110 and discover the best ventilation solution for your home.