Source 1 BP6000MT Humidifier | Installation in Montreal, Laval, Longueuil, South Shore and North Shore

In stock
17 gal/dayAbout 2,000 sq ftBypass
Talk to an HVAC technician · 514 316-2973
Parts warranty 5 years
01 · Your home

Is it the right size for your home?

It puts 17 gallons of water a day into the air, enough to humidify about 2,000 sq ft (our estimate). Pick your home's living area.

It's the right size.

For a 900 to 1,500 sq ft house, it's within its range. It will run at part load on ordinary days and keep a reserve for the coldest days.

AirGreen estimate. Johnson Controls (Source 1) publishes no area for this model. For an average-construction home, we count 120 sq ft per gallon a day, the ratio in AprilAire's and Lennox's tables. Older or leaky house: go one size up; our estimator confirms it on site.

02 · Performance

What it does, in numbers

17gal
Output per dayAbout 64 litres of water turned into humidity, at full output.
5years
Parts warrantyRegistered in your name at start-up.

Output: manufacturer's spec (17 gal/day).

03 · Good to know

What you should know about this one

Published, verifiable figures, not brochure claims.

17 galWhat it produces per day, at full output

About 64 litres of water turned into humidity in 24 hours. The control runs it to match the humidity you set: it rarely runs flat out, except in very cold weather.

Heat pumpBehind a heat pump, it produces less

It evaporates water from a pad using the heat of the air coming off the furnace. A heat pump blows cooler air, so it evaporates less. With a heat pump, talk to our estimator: depending on the manufacturer, we connect it to hot water or suggest a steam model instead.

10 × 12¾ in.Same cabinet as the BP4000MT

Same cabinet and same 10 × 12¾ in. opening as the BP4000MT, but with a drain: the water that isn't evaporated rinses the pad.

Source 1Johnson Controls OEM parts

Source 1 is Johnson Controls' OEM parts brand (York, Luxaire, Coleman). The MY version is its identical York-branded twin.

ControlThe control that comes with it

Manual humidistat (the M in MT).

UpkeepWhat gets replaced, and when

S1-HUPAD35 water panel, the same as the FP7000MT.

35%The humidity to aim for in winter, at most

At −7 °C, no more than 35%; at −18 °C, no more than 25%. Above that, the moisture condenses on the windows. The control adjusts for you if it has an outdoor sensor.

5 yearsThe parts warranty

Parts are covered for 5 years by the manufacturer. We register the warranty in your name at start-up.

04 · Installation

What it needs on site

Bypass ductBetween the supply and return plenums
24 VWater valve, 0.5 A
Cold water supplyConnection to the plumbing
DrainRequired
15.38 × 10.25 × 15.75 inLength × depth × height

Our estimator checks the ducts, the water supply and the drain before ordering.

Complete spec sheetData and cited sources
Brand
Source 1
Model
S1-BP6000MT
Type
Bypass
Output
17 US gal/day
Control included
Manual humidistat (the M in MT).
Upkeep
S1-HUPAD35 water panel, the same as the FP7000MT.
Living area
2,000 sq ft (AirGreen estimate)
Dimensions (L × D × H)
15.38 × 10.25 × 15.75 in
Power supply
24 V
Current
0.5 A
Warranty — parts
5 years

Output, dimensions, electrical data and warranty: Source 1 manufacturer's data. Living area: AirGreen estimate, explained under « Your home ».

05 · In the same family

The next model down and up

Talk to an HVAC technician before you choose

We look at your heating system, the electrical panel, the water supply and the drain, and give you an installed price.

Source 1 BP6000MT: the standard bypass model, with a drain

The BP6000MT mounts on the plenum of a forced-air furnace and works with a bypass duct. It puts out 17 gal/day and suits about 2,000 sq ft by our estimate. Source 1 is the OEM parts brand of Johnson Controls (York, Luxaire, Coleman).

BP6000MT or BP4000MT

The two have the same cabinet and the same 10 × 12¾ in. opening. The BP6000MT is the standard version: the water that isn't evaporated rinses the pad and runs to the drain. The BP4000MT evaporates all its water and does without a drain. Its S1-HUPAD35 water panel is the same as the FP7000MT's, and the M in MT means a manual humidistat is included.

What it needs on site

A 6 in. round bypass duct, a water supply, a drain and a 24 V supply for the valve (0.5 A). Behind a heat pump, the air going through the pad is cooler and output drops. Johnson Controls publishes no replacement interval for the pad; it gets changed when it's scaled. The MY version is its identical York-branded twin.

A visit before the quote

We don't quote without seeing the house. Our estimator checks the furnace, the electrical panel, the water supply and the drain, and confirms that the BP6000MT suits you. AirGreen serves Montréal, Laval, Longueuil, the South Shore and the North Shore: 514 316-2973.