PTAC : Friedrich | Heat Pump 9 000 BTU | Montreal, Laval, Longueuil, South Shore and North Shore
Is it the right size for this room?
Friedrich doesn't publish a room size for this unit. From its 9,400 BTU/h of cooling, we estimate ≈ 125 to 190 sq ft. Choose your room's area.
It's the right size.
For a 130 to 175 sq ft room, this is the range we estimate for this unit: 9,400 BTU/h of cooling, 8,300 BTU/h of heat-pump heating and a heater of up to 3,450 W when the cold calls for it.
AirGreen estimate: Friedrich publishes no room size, so we apply the application ranges Trane publishes for its PTACs of the same cooling capacity. Our estimator confirms the exact area on site.
What it does, in numbers
$17.31
Cooling, all summer
Less than a 60 W light bulb
Bulbs left on day and night for a year. Cooling: 5 h a day for 40 days, the assumption used by Hydro-Québec's air-conditioning calculator. Same calculation for every line: wattage × hours × 11.142 ¢/kWh.
≈$116
Heating, all winter
≈ $9 less than baseboard heaters
Typical 158 sq ft room with one exterior wall, in Montréal: 1,125 kWh of heat per winter (Environment Canada 1991–2020 climate normals). The heat pump is counted only at 8 °C and warmer, where Friedrich rates its output; below that, the heater, at the price of a baseboard. If it keeps heating in colder weather, the bill goes down.
≈ $133 for the year, before tax. Winter is 87% of it. If your home stays in the first tier of Rate D in summer (7.065 ¢/kWh), cooling drops to $10.98.
Capacities and currents: Friedrich ZoneAire Premier product profile PP_PTACPRE_2023 (rev. 2-20-23) and installation manual 9830 1000_00. Power draw: 777 W in cooling (9,400 BTU/h ÷ EER 12.1), 695 W in heat-pump mode, 3,450 W on the 3.5 kW heater. Hydro-Québec Rate D in effect since April 1, 2026: 11.142 ¢/kWh second tier, before tax.
What you should know about this one
Published, verifiable facts, not brochure claims.
9,400What it really delivers in cooling
The name says 9,000 BTU: that's the unit's size class. Friedrich publishes 9,400 BTU/h at 230 V, a little more than its size class, and 9,200 at 208 V, the supply in many buildings.
3,450 WThe heater that takes over
The "3" in PDH09K3SG sets the heater at 3.5 kW: 3,450 W and 11,700 BTU/h at 230 V, 2,821 W at 208 V, on a 6-20P plug and a 20 A circuit. It heats when the heat pump can no longer keep up.
3.5The COP published at 8 °C
Friedrich publishes a heat-pump COP of 3.5: 8,300 BTU/h of heat at 230 V. Each kWh you pay for gives back 3.5 in heat, against 1 for the heater or a baseboard.
6,153What it still heats at 3 °C outside
At 37 °F (3 °C) outside, Friedrich still publishes 6,153 BTU/h of heat-pump heating for this model, against 8,300 at 47 °F (8 °C). Output drops with the cold, but the heat pump keeps working.
−1 °CWhen the heat pump steps aside
Friedrich stops the compressor when the outdoor coil stays below 30 °F (−1 °C) for more than 2 minutes: the heater then works alone. The heat pump restarts when the coil warms back to 45 °F (7 °C).
2.1Pints of water it removes per hour
The dehumidification Friedrich publishes in cooling mode: 2.1 pints per hour. It's what keeps a room comfortable in summer without it turning clammy.
75 cfmFresh air through the vent door
The vent door brings in up to 75 cfm of outside air, according to Friedrich. Close it to keep all the heat or the cool air in the room.
6-20PThe outlet it needs
This model plugs into a NEMA 6-20P outlet on a dedicated 20 A circuit. In a replacement, we first check the outlet and breaker already in place.
It fits a standard PTAC sleeve, with no baffle kit
Friedrich designs this PTAC for the standard 42 × 16 in sleeve, without the added cost of a baffle kit. Our estimator checks the sleeve and the grille in place before ordering.
What it needs on site
In a replacement, we check the outlet and the breaker first: they set the heater size you can use. Our estimator confirms the sleeve, the outlet and the slope before ordering.
Complete spec sheetData and cited sources
- Model
- PDH09K3SG
- Cooling capacity (208/230 V)
- 9,200 / 9,400 BTU/h
- Heating capacity, heat pump (208/230 V)
- 8,100 / 8,300 BTU/h
- Electric heater
- 3.5 kW (2,821 / 3,450 W at 208/230 V)
- EER
- 12.1
- COP (heat pump, 8 °C)
- 3.5
- Current — cooling (208/230 V)
- 3.9 / 3.7 A
- Current — heat-pump heating (208/230 V)
- 3.2 / 3.4 A
- Power — cooling (230 V)
- 775 W
- Power — heat pump (230 V)
- 695 W
- Airflow (low/high)
- 300 / 355 cfm
- Dehumidification
- 2.1 pints/h
- Application range
- ≈ 125 to 190 sq ft (AirGreen estimate)
- Dimensions
- 42 × 21 ½ × 16 in (W × D × H, with front)
- Sleeve
- 42 × 16 × 13 ¾ in
- Net weight
- 119 lb
- Refrigerant
- R-410A · 34 oz
- Heat pump → heater
- outdoor coil below 30 °F (−1 °C) for over 2 min
- Power supply
- 208/230 V · 1 ph · 60 Hz
All values: Friedrich ZoneAire Premier product profile PP_PTACPRE_2023 (rev. 2-20-23) and installation manual 9830 1000_00. Operating cost: cooling at 777 W for 200 h per summer; heating estimated for a typical 158 sq ft room (1,125 kWh of heat per winter, heat pump counted at 8 °C and warmer); at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The neighbouring models
Talk to an HVAC technician before you choose
We check the existing sleeve, the outlet and the heater size, and give you an installed price. For a building, we order the same series for every room.
The Ultimate Guide to Friedrich PDH09K3SG PTAC Units
AirGreen is proud to introduce the Friedrich PDH09K3SG PTAC Heat Pump. As a leading HVAC company serving Montreal, Laval, Longueuil, North Shore, and South Shore, we understand the importance of quality, efficiency, and reliability. This guide delves deep into the features, benefits, and technical specifications of the Friedrich PTAC unit, ensuring you make an informed decision for your residential HVAC needs.
Friedrich PTAC: A Synonym for Excellence
Friedrich, a renowned brand in the HVAC industry, has consistently delivered top-notch products. The 9,000 BTU Friedrich PTAC is no exception. Designed with precision and built to last, this unit promises to keep your home comfortable throughout the year.
Key Features of the Friedrich PDH09K3SG PTAC Heat Pump
- Tangential Blower Wheel: Ensures fast, powerful, and even air distribution, maintaining a consistent temperature throughout the room.
- Remote Thermostat Operation: Offers flexibility with both wireless and wired remote thermostat functionalities.
- Two Fan Motors: Permanently lubricated for quiet operation, enhancing your living experience.
- Energy Management Compatibility: This unit can seamlessly integrate with energy management systems, ensuring optimal energy utilization.
- High Energy Efficiency: With EERs up to 13.0 and COPs up to 3.6, this unit is designed to save on energy bills.
- Adjustable Temperature Range: Set high/low temperature limits to reduce energy consumption.
- Internal Diagnostic Program: A built-in system that alerts maintenance teams to component failures or operational issues.
- Antimicrobial Air Filters: Ensures the air you breathe is free from harmful microorganisms.
- Modular Design: Provides easy access to key components, making maintenance a breeze.
- Warranty: A robust 6-year parts and labor warranty, with a 6-year limited warranty on the compressor.
Advanced Features for Enhanced Comfort
- Digital Temperature Readout: Precisely monitors room temperature, ensuring optimal comfort.
- One-Touch Operation: Directly switch to heating or cooling mode, eliminating any confusion.
- Constant Fan Mode: Provides continuous fan operation in both cooling and heating modes.
- Room Freeze Protection: If the room temperature drops to 40°F, the unit activates to raise the temperature, ensuring the room never reaches freezing levels.
- Condensate Removal System: Uses slinger ring technology to cool the coil and boost efficiency.
Technical Specifications
- Cooling Capacity: 9,000 BTU
- Refrigerant Type: R-410A
- Voltage: 220 VOLTS
- Dimensions: 42 x 21.5 x 16 inches
- Warranty: 6 years on the compressor, 6 years on parts and 6 years on labor
Why Choose the Friedrich PTAC Heat Pump?
The Friedrich PTAC Heat Pump is not just a machine; it's a promise of unparalleled comfort and efficiency. Whether you reside in Montreal, Laval, Longueuil, North Shore, or South Shore, this unit is designed to meet the unique climatic challenges of each region.
Moreover, with AirGreen's exceptional installation and post-sales services, you're not just buying a product; you're investing in peace of mind.
Warranty: 6 years on the compressor, 6 years on parts and 6 years on labor, straight from the distributor.