Floor Heating Thermostat STELPRO CONCERTO BASIC STF362NP | Montreal, Laval, Longueuil, South Shore and North Shore

In stock
SKU: STF362NP

Some rooms do not need a schedule.

Floorelectric heating
Simpleno app
3 yearsmanufacturer warranty
Get my installed price 514 316-2973

Quick facts

Model numberSTF362NP
ProgrammableNo
Wi-FiNo
Touch screenNo
ENERGY STARNo
Warranty3 years

Some rooms don't need a schedule. A basement washroom, a tiled vestibule, a laundry room, a home where someone is in all day: all you want there is a floor at the right temperature, set once and left alone. The Stelpro CONCERTO BASIC STF362NP does just that, as a non-programmable floor heating thermostat running at line voltage, accurate and free of unnecessary features.

Manual control, done with precision

Accurate control of the floor or the air

The CONCERTO BASIC gives you precise control of the floor or room air temperature, your choice. Its included 15 ft (4.5 m) floor sensor measures the floor temperature, while the built-in room sensor reads the temperature of the room. In a bathroom, controlling by floor temperature gives a steady feel underfoot. In a basement where the heated floor is the main heat source, controlling by room air often makes more sense. We help you choose during installation.

The floor can be set from 5 to 40 °C (41 to 104 °F) and the room air from 0 to 40 °C (32 to 104 °F). The digital display works in °C or °F.

Seven days of energy tracking

Even without programming, the STF362NP keeps you informed: it shows your energy use over the last 7 days. It's a practical way to see the effect of a slightly lower floor setpoint, or to compare a week of deep cold with a milder one. During a Quebec winter, that information helps keep your bill in check without any hassle.

Which rooms it's for

The STF362NP belongs anywhere use is constant or unpredictable. In a basement washroom used at all hours, a schedule doesn't add much. In a rental unit, a manual setting is easier to explain to occupants. In a vestibule where the main goal is to avoid ice-cold tile when you walk in, a moderate, steady setpoint does the job nicely all winter.

Systems and capacity

The thermostat is made for electric heated floors with cables or mats. It runs on 120, 208 or 240 V and handles up to 1800 W at 120 V, 3120 W at 208 V or 3600 W at 240 V (15 A). It doesn't control a furnace, a heat pump or a hydronic system. For a larger area, it pairs with CONCERTO EXPANSION STF362XU expansion units, which add capacity without adding another thermostat.

Electrical safety

Like the whole CONCERTO lineup, the BASIC has a built-in Class A GFCI with a test light, a terminal block and a double-pole (DPST) switch that cuts both poles. It works with other manufacturers' sensors, which makes it a good option for replacing a faulty old thermostat without touching the floor, once the existing sensor has been checked.

Manual or programmable: choosing the right CONCERTO

The CONCERTO BASIC STF362NP is the entry-level model in the lineup. If the room is in constant use, or if the floor is mainly there to take the chill off a cold surface, manual control is enough and it's the easiest for everyone to understand. If the room is used at specific times, the CONCERTO STF362P adds programming and early start. The CONCERTO TOUCH STF362PTS offers a colour touchscreen and a detailed energy use log, and the CONCERTO WI-FI STF362WF can be controlled remotely. They all share the same electrical platform, the same sensor and the same compatibility with expansion units.

Technical specifications

  • Systems: electric floor heating (cables or mats)
  • Power: line voltage, 120/208/240 V; maximum 1800 W at 120 V, 3120 W at 208 V, 3600 W at 240 V (15 A)
  • Manual control, non-programmable
  • Precise control of floor or room air temperature
  • Energy use tracking for the last 7 days
  • Digital display, °C or °F
  • Sensors: 15 ft (4.5 m) floor sensor included and built-in room sensor; compatible with other manufacturers' sensors
  • Setting range: floor 5 to 40 °C (41 to 104 °F); room 0 to 40 °C (32 to 104 °F)
  • Built-in Class A GFCI with test light
  • Terminal block and double-pole (DPST) switch that cuts both poles
  • Compatible with CONCERTO EXPANSION STF362XU expansion units
  • White moulded plastic housing

Installed by AirGreen, set up to last

Installation

Our technicians check the floor's load and voltage, measure the resistance of the elements and the sensor, then wire the thermostat to a suitable circuit. The GFCI is tested while you're there. Next, we set the control mode, floor or room air, along with a starting setpoint suited to your flooring. If it's a replacement, we check the existing sensor before deciding whether to keep it.

Day to day

A manual thermostat works best with a steady setpoint. Find the temperature that suits you, then leave it there: big, frequent changes make the floor work for nothing, since a heated slab responds slowly. Check the last-7-days tracking now and then to make sure your energy use stays in line with how the room is used. Before a long absence, lower the setpoint instead of shutting off the circuit.

Maintenance

Test the GFCI every month and reset it. Wipe the housing with a dry cloth. Keep the area under the thermostat clear so the room sensor reads the room's true temperature. If the display or the heating seems unusual, call us for a check.

Why choose us

AirGreen Inc. is a family-owned Montreal HVAC company, in business for more than 15 years, with an RBQ licence and a showroom in Boucherville. We install wall-mounted heat pumps, central systems and electric heating solutions, and we recommend the simplest thermostat that truly meets your needs, not the most expensive one.

To buy the Stelpro CONCERTO BASIC STF362NP thermostat and have it professionally installed, contact AirGreen. We serve all of Montreal, Laval, Longueuil, the North Shore and the South Shore.

Stelpro documents

Stelpro spec sheet (PDF)

01 · Key facts

Key facts: STELPRO CONCERTO BASIC STF362NP

Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.

TypeFloor heating thermostatSTELPRO CONCERTO BASIC STF362NP
Forelectric floor heatingSystems
Powerline voltage 120/208/240 VPower supply
Wi-FiNoconnection
02 · Compatible?

Is the STELPRO CONCERTO BASIC STF362NP compatible with your heating?

Two steps, thirty seconds. The verdict takes your system and your wiring into account.

Full compatibility table

Heating systemVerdictWhy
Central heat pumpNoA central system is controlled in 24 V.
Dual energy (heat pump + furnace)NoDual energy is controlled in 24 V.
Electric furnaceNoA furnace is controlled in 24 V.
Gas or oil furnaceNoA furnace is controlled in 24 V.
Steam, gravity or hot waterNoA hydronic floor needs a hydronic control.
Baseboards, convectors, radiant ceilingTo confirmDepends on the model: some also control a resistive load. See the spec sheet.
Fan-forced heaterNoA fan-forced heater needs a thermostat rated for fans.
Electric floor heatingYesDesigned for electric floor heating, with a floor probe.
Wall or ducted mini-split heat pumpNoA wall heat pump is controlled by its own brand’s controller.
03 · Wiring

How a floor heating thermostat connects

Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.

04 · Try it

Try the STELPRO CONCERTO BASIC STF362NP before you buy

Raise the setpoint, change the mode: see how it responds.

05 · Winter and rebates

Winter, Rate Flex D and rebates: what this thermostat changes

With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. Turning the setpoint down a few degrees during those hours is what counts.

06 · Head to head

The STELPRO CONCERTO BASIC STF362NP or its closest sibling?

The most useful comparison: the model right next to it in our catalogue.

07 · The right choice

The right thermostat in three questions

If this model is not the right one for you, the page says so and shows you which one is.

08 · The system

Products that go with the STELPRO CONCERTO BASIC STF362NP

Parts named in its spec sheet that we sell and install.

09 · Installation

Installed and set up by our technicians, in five steps

What we do at your place, in order. The on-site estimate is free.

  1. 01CheckHeating cable, probe and circuit load.
  2. 02Shut-offBreaker shut off at the panel.
  3. 03MountingHeating cable and probe wiring, mounting.
  4. 04TestPower back on and floor check.
  5. 05SettingsFloor temperature limits, schedule, connection.
10 · Specifications

STELPRO CONCERTO BASIC STF362NP specifications

From the manufacturer’s sheet. Type a word: the list filters as you write.

GeneralSystemselectric floor heating (cables or mats)
ElectricalPower supplyline voltage 120/208/240 V; maximum 1800 W at 120 V, 3120 W at 208 V, 3600 W at 240 V (15 A)
GeneralOtherManual control, non-programmable
GeneralOtherPrecise control of floor or room air temperature
GeneralOtherEnergy consumption tracking for the last 7 days
GeneralOtherDigital display, °C or °F
GeneralProbes15 ft (4.5 m) floor probe included and built-in ambient probe; compatible with other manufacturers' probes
GeneralAdjustment rangefloor 5 to 40 °C (41 to 104 °F); ambient 0 to 40 °C (32 to 104 °F)
GeneralOtherBuilt-in Class A GFCI with test light
GeneralOtherTerminal block and double-pole (DPST) switch that disconnects both poles
GeneralOtherCompatible with CONCERTO EXPANSION STF362XU expansion units
GeneralOtherWhite moulded plastic housing
11 · Questions

Frequently asked questions about the STELPRO CONCERTO BASIC STF362NP

Short answers, no detours.

What does the STELPRO CONCERTO BASIC STF362NP work with?

According to the manufacturer’s sheet: electric floor heating (cables or mats).

Who installs it?

Our technicians: the circuit is shut off at the panel, the heater load is checked, then the thermostat is wired and tested.

Can it be controlled remotely?

Not directly: it has no built-in Wi-Fi.

What is the warranty?

3 years, per the manufacturer’s information.

Does AirGreen install it?

Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

Your thermostat, installed and set up by our technicians

We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, before any purchase
Quote in 24 hinstalled price, no surprises
Bouchervilleshowroom

Sources checked on October 5, 2026.

  • Manufacturer’s spec sheet for this product (summarized in the description and specifications above)
  • Natural Resources Canada, “Keeping the Heat In”, section 9 (modified September 29, 2025)
  • Hydro-Québec, electricity rates in effect April 1, 2026; Rate Flex D and Winter Credit Option pages (consulted October 5, 2026)
  • Énergir, smart thermostat grant (consulted October 5, 2026)

Savings shown are estimates; only Hydro-Québec and Énergir confirm a rate or a rebate.