EMERSON BP125C Electronic Thermostat | Montreal, Laval, Longueuil, South Shore & North Shore
Duplex, condo or rental heated by baseboards: the BP125C follows one weekday and one weekend schedule, with no Wi-Fi and with setpoint limits.
Quick facts
In a duplex or a rental unit heated with electricity, the thermostat has to stay simple for the occupant and the owner. The BP125C (EMERSON's White-Rodgers line) is programmed right at the wall, with no app and no Wi-Fi network, and its safety mode keeps the setpoint between a minimum and a maximum limit. It is a programmable baseboard thermostat with no frills.
A schedule on the wall, limits on the setpoint
- Safety mode: you set a minimum and a maximum setpoint; the occupant adjusts within that range.
- Weekday and weekend schedules: one for Monday to Friday, one for the weekend, 4 periods a day.
- 18 preset programs to get going without building a schedule from scratch.
- Early start: heating starts earlier to aim for the setpoint at the programmed time.
- LCD screen: shows the temperature, power bars, time and day.
- Off below 3 °C: the setpoint runs from 3 to 30 °C (37 to 86 °F), in 0.5 °C steps.
Baseboards and convectors only
For heating only, the BP125C runs a resistive load of 1.25 to 12.5 A on a 120, 208 or 240 V circuit, with a 2- or 4-wire hookup and no polarity. A central system or electric floor heating calls for another type of thermostat, and fan-forced heaters are not named in the instructions.
Compared with the 1E65-151 and the BP150
The EMERSON Line Voltage 1E65-151 shares the BP125C's specifications and the same manufacturer instructions (0037-7457): same load, same schedules, same setpoint range. The sheet for the EMERSON BP150 also lists a display lit at night, handy in a child's room or a hallway; if you don't need that, the BP125C does the same job.
Installing it in a home or rental
The circuit breaker is shut off at the panel before any work, then the baseboards' wattage is added up and compared with the BP125C's range for the circuit voltage, for example 300 to 3,000 W at 240 V. In a rental unit, we then set the safety-mode limits with the owner; the free in-home estimate lets us count the thermostats to replace ahead of time.
Manufacturer document: installation instructions 0037-7457 (BP150, BP125C, 1E65-151). Sold and installed by AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: EMERSON BP125C
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the EMERSON BP125C compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
A thermostat that works on 120/240 V
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the EMERSON BP125C before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
What each room costs
An interactive drawing of what this kind of control does day to day.
The EMERSON BP125C or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01LoadWe add up the heaters on the circuit and check the thermostat’s range.
- 02Shut-offBreaker shut off at the panel, 2- or 4-wire circuit identified.
- 03MountingWiring, mounting, power back on.
- 04TestHeating checked room by room.
- 05SettingsSchedule, connection and app if the model has them.
EMERSON BP125C specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the EMERSON BP125C
Short answers, no detours.
What does the EMERSON BP125C work with?
According to the manufacturer’s sheet: heating only, resistive loads from 1.25 to 12.5 A (electric baseboards, convectors); not for a central system.
What load can it control?
Up to 3,000 W at 240 V (1,500 W at 120 V), per the manufacturer’s sheet.
Who installs it?
Our technicians: the circuit is shut off at the panel, the heater load is checked, then the thermostat is wired and tested.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
