EMERSON BP150 Electronic Thermostat | Montreal, Laval, Longueuil, South Shore & North Shore
In a child's room or a hallway at night, the BP150's display stays lit in nightlight mode, while its weekday and weekend schedules run your baseboards.
Quick facts
At night, in a child's room, the hallway to the bathroom or an aging parent's bedroom, a thermostat whose display stays lit helps you find your way and read the temperature without switching on a lamp. The BP150 (EMERSON's White-Rodgers line) offers exactly that nightlight mode. The rest of the time, it follows one weekday schedule and one weekend schedule.
Lit at night, programmed by day
- Backlit display with nightlight mode: temperature, power bars, time and day stay readable in the dark.
- Two schedules: weekdays (Monday to Friday) and weekend, 4 periods a day, starting from 18 preset programs.
- Early start: heating starts earlier to aim for the setpoint at the programmed time.
- Safety mode: minimum and maximum limits, so a teenager's room never gets pushed to the top of the range.
- Setpoint from 3 to 30 °C (37 to 86 °F), adjustable in 0.5 °C steps.
Electrical compatibility
The BP150 runs electric baseboards and convectors, heating only, on 120, 208 or 240 V circuits, 2- or 4-wire, with no polarity. The load must be resistive and between 1.25 and 12.5 A. It is not meant for a central system or electric floor heating. As for fan-forced heaters, the instructions cover resistive loads only and do not name them.
BP150, 1E65-151 or BP125C?
In practice, the EMERSON Line Voltage 1E65-151 and the EMERSON BP125C match the BP150 on programming, setpoint range and load; only the BP150's sheet lists a backlit display with nightlight mode. In a room where nobody checks the thermostat at night, they do the same job.
Installation and nightlight setup
At the free in-home estimate, we count the room's baseboards and check that their total wattage falls within the BP150's range: 150 to 1,500 W at 120 V, 260 to 2,600 W at 208 V or 300 to 3,000 W at 240 V. On installation day, we switch the breaker off at the panel first, then set the time, the day and the starting program, and turn on the nightlight if you want it.
Manufacturer document: installation instructions 0037-7457 (BP150, BP125C, 1E65-151). Sold and installed by AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: EMERSON BP150
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the EMERSON BP150 compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
A thermostat that works on 120/240 V
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the EMERSON BP150 before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
What each room costs
An interactive drawing of what this kind of control does day to day.
The EMERSON BP150 or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01LoadWe add up the heaters on the circuit and check the thermostat’s range.
- 02Shut-offBreaker shut off at the panel, 2- or 4-wire circuit identified.
- 03MountingWiring, mounting, power back on.
- 04TestHeating checked room by room.
- 05SettingsSchedule, connection and app if the model has them.
EMERSON BP150 specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the EMERSON BP150
Short answers, no detours.
What does the EMERSON BP150 work with?
According to the manufacturer’s sheet: heating only, resistive loads from 1.25 to 12.5 A (electric baseboards, convectors); not for a central system.
What load can it control?
Up to 3,000 W at 240 V (1,500 W at 120 V), per the manufacturer’s sheet.
Who installs it?
Our technicians: the circuit is shut off at the panel, the heater load is checked, then the thermostat is wired and tested.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
