BRADFORD WHITE RE250S10-1NCPP Electric Water Heater (47 gallons) | Montreal, Laval, Longueuil, South Shore & North Shore

In stock
SKU: RE250S10-1NCPP
178 L47 US gal of storage
10 yrstank warranty
Talk to an expert · 514 316-2973
10-year tank warranty, 6-year parts3/4 in NPT connections240 V
01 · Running cost

What it will cost you each year

Pick your household. The math follows your hot water use, at the current Hydro-Québec rate.

$524

per year with this tank, for 186 L of hot water a day

This tank$524
A heat pump water heater (UEF 3.44)$136

Over 10 years, the gap with a heat pump

This tankHeat pumpGap

Curious? See the AeroTherm 50 gal heat pump water heater.

How we calculate. Mains water at 7 °C heated to 60 °C (Québec.ca), 75 L per person per day (Natural Resources Canada) or 186 L for the average Québec household. This tank: the water’s energy plus its 59 W standby loss, published on the manufacturer’s spec sheet. Heat pump: energy ÷ UEF of 3.44 (Bradford White AeroTherm 50 gal). Price: 11.142 ¢/kWh, Rate D second tier in force since April 1, 2026, before tax. Indicative estimate.

02 · Why this model

What sets the Bradford White RE250S10 apart

10 yrs

Tank warranty

The '10' suffix means a 10-year limited tank warranty, versus 6 years for the RE250S6.

6 yrs

Parts warranty

Parts remain covered for 6 years, as on the standard version.

47 US gal

Short format

A 47 US gal (39 imp. gal, 178 L) tank, 49 7/16 in tall and 22 in in diameter.

59 W

Standby loss

Bradford White publishes a 59 W standby loss for this size.

Residential use

Warranty condition

Outside a single-family home, the 10-year tank warranty drops to 3 years (tank) and 1 year (parts).

03 · How it works

Cold water at the bottom, hot water on top

Cold watergoes down the dip tubeHot waterdrawn from the topUpper elementand its thermostatLower elementand its thermostatCold waterarrives at the bottom
  1. Cold water arrives at the bottom of the tank. Hot water, being lighter, stays on top, where it is drawn.
  2. The elements, each controlled by its thermostat, bring the water back to the set temperature.
  3. Foam insulation limits the heat lost while the water waits.
04 · Will it fit?

Check the height and the way in before our visit

It travels upright. Measure the ceiling at the spot and the narrowest door on the way.

in
in

Unit: 49.44 in tall (1256 mm), 22 in across (559 mm), about 143 lb shipping weight. The clearances the manufacturer requires are checked on site.

05 · Your current tank

How old is yours?

The year it was made is on the tank’s rating plate. Enter it.

Signs it is wearing out

  • Hot water runs out sooner than it used to.
  • The water comes out slightly reddish.
  • Rust shows at the bottom of the tank.
  • Moisture or drips around the unit.

Manufacturers announce a 10 to 15 year life. Many insurers require replacement after 10 or 12 years and may refuse a water damage claim past that age (CAA-Québec). Check your policy.

06 · Installation

What the spot needs, and who does what

240 V circuitA dedicated circuit, sized by our electrician.
3/4 in NPT waterCold inlet, hot outlet and an accessible shut-off valve.
T&P valveTemperature and pressure relief valve, with its discharge line.
Pan and detectorDrip pan under the tank and a leak detector: strongly recommended (CAA-Québec).
60 °C, 49 °CTank set to 60 °C against bacteria; 49 °C max at the shower and tub (Construction Code, art. 2.2.10.7).

AirGreenFree visit and quote, electrical connection (RBQ licence 5645-9605-01, subclass 16), start-up.

PlumberWater connections and relief valve by a master pipe-mechanic (CMMTQ).

YouA photo of the rating plate, the spot and the stairs saves us a trip.

07 · Maintenance

A few habits that make it last

  1. Start-up daySetting the temperature, with you.
  2. Every yearPartial drain to flush sediment, and a test of the relief valve.
  3. Depending on your waterAnode inspection: it wears so the tank steel does not. In hard water it goes faster.
08 · Spec sheet

Every figure, with its source

Capacity and performance
Model
RE250S10-1NCPP
Capacity
47 US gal · 178 L
Standby loss
59 W
Electrical
Supply
240 V, single phase
Element type
Screw-in
Dimensions and connections
Height
49.44 in · 1,256 mm
Diameter
22 in · 559 mm
Shipping weight (approx.)
143 lb · 65 kg
Water connections
3/4 in NPT
Build and warranty
Inner lining
Vitraglas with Microban
Limited warranty, tank
10 years
Limited warranty, parts
6 years

Manufacturer data. Detailed sources at the bottom of the page.

09 · Same family

The size below and above

47 US gal49.44 in tallYou are here
61 US gal60.25 in tallSee the larger one
10 · Questions

What people ask us most

Is there a LogisVert grant for this water heater?

No. Hydro-Québec’s LogisVert guide (version 1.10, September 15, 2026) lists no water heater among its eligible measures. At quote time we check other programs that could apply to your address.

Electric or heat pump: which should I choose?

An electric tank costs less up front, takes less room and needs no condensate drain or air volume around it. A heat pump water heater costs more but uses far less: the “Cost per year” section shows the gap for your household.

What temperature should the tank be set to?

To 60 °C, as the Québec government recommends, to limit bacterial growth. At shower and tub valves, the Construction Code caps the water at 49 °C: that is the job of the valve or a thermostatic mixing valve.

Can my insurer require me to replace it?

Often, yes. According to CAA-Québec, many insurers require replacement after 10 or 12 years and may refuse a water damage claim past that age. The manufacture date is on the rating plate.

Who does the installation?

AirGreen does the visit, the electrical connection under its RBQ licence (subclass 16) and the start-up. The water connections are done by a master pipe-mechanic (CMMTQ).

11 · AirGreen

We check the spot before we sell you anything

Free on-site estimate, written quote. Send a photo of your current tank and its plate, and we prepare the visit.

Book my free estimate
Sources checked November 2, 2026.
  1. Bradford White Canada, Upright Electric Residential spec sheet C1201-0926 CANADA · docs.bradfordwhite.com
  2. Bradford White Limited Residential Water Heater Warranty 238-39699-00ZAN · docs.bradfordwhite.com
  3. Bradford White Canada Residential Electric Replacement Parts Book 238-54105-00 · docs.bradfordwhite.com
  4. Hydro-Québec, rate grid, Rate D in force April 1, 2026 (7.065 ¢ and 11.142 ¢/kWh).
  5. Québec.ca, “Eau chaude”, updated November 5, 2025 (186 L/day, 7 °C water, 60 °C, volumes per use).
  6. Natural Resources Canada, water heater buying guide (75 L/person/day, first-hour rating).
  7. Québec Construction Code, Chapter III Plumbing, art. 2.2.10.7 (RBQ).
  8. CAA-Québec, “Chauffe-eau: quelle capacité choisir”, updated June 29, 2026.
  9. Hydro-Québec, LogisVert residential participation guide, version 1.10, September 15, 2026.

Costs shown are indicative estimates before tax.

The extended-warranty version of the 47 US gallon tank, for homeowners who plan ahead

When you plan to stay in your home for a long time, you choose a water heater differently. You look less at day one than at the years that follow: the quality of the tank, ease of maintenance and the manufacturer's coverage. The Bradford White RE250S10-1NCPP electric water heater is the extended-warranty version of Bradford White's 47 US gallon (39 imperial gallon, 178 L) residential tank. It shares the capacity and construction of the standard version, with longer coverage. AirGreen installs it in Montreal, Laval, Longueuil, on the South Shore and on the North Shore.

What the "10" suffix means

In Bradford White's model numbering, the figure following the model letter indicates the warranty category. The manufacturer specifies that, to get the extended-warranty version of a tank in this series, the "6" suffix is replaced with "10". The RE250S10-1NCPP is therefore the extended-warranty version of this capacity. The exact split of coverage between the tank and the parts is confirmed in writing with your quote, so you know precisely what is covered before ordering.

Which homes it suits

With a 178 L reserve, this tank suits a family of three or four sharing a main bathroom and a powder room. The extended-warranty version appeals mostly to homeowners who have just bought and plan to stay, those renovating their basement who do not want to touch it again, or duplex owners who live in one of the units and want fewer surprises. In a home to be sold in the short term, the standard version is often enough.

Manufacturer data

  • Capacity: 47 US gallons, 39 imperial gallons, 178 L.
  • Standby loss: 59 W.
  • Connections: 3/4 in. (19 mm) NPT for water and electrical, with factory-installed dielectric fittings.
  • Internal lining: Vitraglas with Microban.
  • Elements: immersion, screw-in type.
  • Operation: non-simultaneous by default; simultaneous available, to be specified when ordering.
  • Available voltages: 120 V, 208 V, 240 V, 277 V, 480 V; 120 V and 277 V wired single-phase only.
  • Weight: 143 lb (65 kg).
  • Listings: all models are UL listed; installation approved in manufactured homes under CAN/CSA Z240 MH series.

Construction designed to last

The tank is protected by the Vitraglas with Microban lining, which isolates the steel from the water. The factory-installed dielectric fittings on the 3/4 in. connections separate the steel of the tank from the copper of the piping, a joint where corrosion often starts. The immersion elements are screwed in: when an element wears out, it can be replaced without changing the tank, which is exactly what you expect from a unit kept for a long time.

A 59 W standby loss

Bradford White publishes a standby loss of 59 W for this model. This value measures the heat the tank gives off to the room when idle; it depends mostly on the insulation around the tank. A moderate loss means fewer heating cycles to maintain the temperature. To go further, we insulate the accessible hot water piping near the tank, a simple improvement that keeps the water in the lines hot for longer.

Water quality and service life

Over the long term, water quality matters as much as the tank's construction. Hard water leaves sediment at the bottom of the tank and scales the elements; softened water, on the other hand, wears the anode faster. If your home is supplied by a well or equipped with a water softener, we adjust the frequency of flushing and anode inspections accordingly. It is a small adjustment that makes a real difference to the life of a tank you plan to keep for a long time.

Electrical connection

The factory configuration is non-simultaneous: only one element heats at a time. Simultaneous operation is available, but it must be requested when ordering. The exact element wattage of the unit ordered is confirmed with the order and written in your quote, because it determines the breaker and the conductor size. In a house, the tank is fed by a two-pole 240 V circuit, which we check before reusing it.

Making a warranty claim when the time comes

An extended warranty is only worth something if you can make a claim. Keep your installation invoice and note the serial number on the nameplate; this is the information usually requested when making a claim. Regular maintenance, such as an annual partial flush and an anode inspection, also helps keep the unit in good condition throughout the coverage period.

Installation of the RE250S10-1NCPP by AirGreen

AirGreen is a family-owned heating and cooling company established in Montreal, active for more than fifteen years and holding RBQ licence 5645-9605-01 (ventilation, refrigeration and electrical). After a free on-site estimate, you receive a written quote that also specifies the manufacturer's coverage. Installation includes:

  • assessing the location, the access path and the drain;
  • draining, disconnecting and removing the old tank;
  • connecting the cold and hot water in 3/4 in. NPT;
  • installing a new relief valve and its discharge line;
  • the electrical connection according to the confirmed wattage;
  • filling, purging air, powering up and setting the temperature;
  • handing over the warranty documents and our maintenance advice.

New construction and major renovation

In new construction or a complete renovation, the water heater deserves its place from the planning stage: an accessible room, a floor drain nearby and enough clearance in front of the elements. We can coordinate the installation with your contractor so the tank arrives at the right time, once the rough plumbing and electrical are ready.

Service area

We work in Montreal, Laval, Longueuil, Westmount, Mount Royal, Sainte-Dorothée, Brossard, Carignan and everywhere on the South Shore and the North Shore. Payment can be spread out through our financing.

Request your free estimate for the Bradford White RE250S10-1NCPP. A photo of your current installation lets us prepare an accurate quote, warranty included.