THERMO 2000 TURBOMAX50-5 Indirect Water Heater (50 gallons) | Montreal, Laval, Longueuil, South Shore & North Shore

In stock
SKU: TURBOMAX50-5
189 L50 US gal of storage
2,154 Lof hot water in the first hour
15 yrstank warranty
Talk to an expert · 514 316-2973
15-year tank warranty, 2-year parts1 1/2 in male copper sweat connections
01 · Your home

Enough hot water for your busiest hour?

A tank rarely runs out over a day. It runs out over an hour. Describe your busiest hour.

Showers in the same hour35 L each, low-flow head, 6 minutes
2
A bathWe count 110 L (75 to 150 L depending on the tub)
The dishwasher13 L per cycle on average
Your peak hour: 83 LThis model, first hour: 2,154 L

An indirect’s first-hour rating depends on the boiler; the test conditions are in the spec sheet. Method: the first-hour rating should equal or exceed the hot water of your busiest hour (Natural Resources Canada). CAA-Québec rule of thumb: 40 gal for 1 or 2 people, 60 gal for 3 or 4, 80 to 100 gal for 5 or more. Volumes: Québec.ca.

02 · Why this model

What sets the Thermo 2000 TurboMax 50-5 apart

Instant

No stored potable water

Potable water runs through copper coils and is heated on demand: the 50 gal tank holds boiler water, not the water you drink.

32.7 sq ft

Heat-transfer area

The copper coils provide 32.7 sq ft of exchange surface for a maximum domestic hot water flow of 15 gpm, per Thermo 2000.

15 gpm

Maximum flow

The 32.7 sq ft coil (the '5') raises maximum flow to 15 gpm, versus 9 gpm for the same-size 50-3.

15 yrs

Residential warranty

Thermo 2000 covers the tank and copper coils for 15 years in residential use (10 years commercial) and mechanical parts for 2 years.

03 · How it works

The boiler heats the water without ever touching it

Boilerheat sourceboiler waterHeat exchangertwo separate circuitsHot waterto the houseCold waterfrom the mains
  1. When the tank calls for heat, its control starts the boiler loop.
  2. Boiler water and drinking water flow in two separate circuits: heat passes through the exchanger wall.
  3. No electric element: all the heat comes from the boiler that already heats the house.
04 · Will it fit?

Check the height and the way in before our visit

It travels upright. Measure the ceiling at the spot and the narrowest door on the way.

in
in

Unit: 60.69 in tall (1542 mm), 22 in across (559 mm), about 230 lb shipping weight. The clearances the manufacturer requires are checked on site.

05 · Your current tank

How old is yours?

The year it was made is on the tank’s rating plate. Enter it.

Signs it is wearing out

  • Hot water runs out sooner than it used to.
  • The water comes out slightly reddish.
  • Rust shows at the bottom of the tank.
  • Moisture or drips around the unit.

Manufacturers announce a 10 to 15 year life. Many insurers require replacement after 10 or 12 years and may refuse a water damage claim past that age (CAA-Québec). Check your policy.

06 · Installation

What the spot needs, and who does what

A boilerIts ratings are published with a 455,000 BTU/h boiler. The heating contractor checks yours.
Boiler loopCirculator or zone valve, with the tank control wired to the boiler.
1 1/2 in male copper sweat waterCold inlet, hot outlet and an accessible shut-off valve.
T&P valveTemperature and pressure relief valve, with its discharge line.
Pan and detectorDrip pan under the tank and a leak detector: strongly recommended (CAA-Québec).
60 °C, 49 °CTank set to 60 °C against bacteria; 49 °C max at the shower and tub (Construction Code, art. 2.2.10.7).

AirGreenFree visit and quote, coordination of the work.

HeatingBoiler connection by a hydronic heating contractor (RBQ 15.4).

PlumberWater connections and relief valve by a master pipe-mechanic (CMMTQ).

YouA photo of the rating plate, the spot and the stairs saves us a trip.

07 · Maintenance

A few habits that make it last

  1. Start-up daySetting the temperature, with you.
  2. Every yearPartial drain to flush sediment, and a test of the relief valve.
  3. With the boilerThe heating contractor checks the loop, circulator and tank control during the boiler service.
08 · Spec sheet

Every figure, with its source

Capacity and performance
Model
TURBOMAX50-5
Capacity
50 US gal · 189 L
First-hour rating
569 US gal · 2,154 L
Continuous draw
549 US gal/h · 2,078 L/h
Reference boiler
455,000 BTU/h
Recovery
549 US gal/h · 2078 L/h
Dimensions and connections
Height
60.69 in · 1,542 mm
Diameter
22 in · 559 mm
Shipping weight (approx.)
230 lb · 104 kg
Water connections
1 1/2 in male copper sweat (potable water) ; 1 1/4 in NPT male (boiler)
Heat exchanger
Copper coils carrying potable water, immersed in boiler water (instantaneous)
Build and warranty
Drain valve
Brass
Limited warranty, tank
15 years
Limited warranty, parts
2 years

Manufacturer data. Detailed sources at the bottom of the page.

09 · Same family

The size below and above

10 · Questions

What people ask us most

Is there a LogisVert grant for this water heater?

No. Hydro-Québec’s LogisVert guide (version 1.10, September 15, 2026) lists no water heater among its eligible measures. At quote time we check other programs that could apply to your address.

Do I need a boiler?

Yes. An indirect water heater has no element: it is heated by water from a boiler. The boiler connection is done by a hydronic heating contractor (RBQ 15.4) and the water connections by a master pipe-mechanic (CMMTQ).

What temperature should the tank be set to?

To 60 °C, as the Québec government recommends, to limit bacterial growth. At shower and tub valves, the Construction Code caps the water at 49 °C: that is the job of the valve or a thermostatic mixing valve.

Can my insurer require me to replace it?

Often, yes. According to CAA-Québec, many insurers require replacement after 10 or 12 years and may refuse a water damage claim past that age. The manufacture date is on the rating plate.

How many people is 50 gallons enough for?

It delivers 2,154 L of hot water in the first hour, with the boiler stated in the spec sheet. CAA-Québec’s rule of thumb suggests 40 gal for 1 or 2 people, 60 gal for 3 or 4 and 80 to 100 gal for 5 or more; the “Your home” tool above accounts for your busiest hour.

Who does the installation?

AirGreen does the visit and the quote and coordinates the work. The water connections are done by a master pipe-mechanic (CMMTQ) and the boiler connection by a hydronic heating contractor (RBQ 15.4).

11 · AirGreen

We check the spot before we sell you anything

Free on-site estimate, written quote. Send a photo of your current tank and its plate, and we prepare the visit.

Book my free estimate
Sources checked November 2, 2026.
  1. Thermo 2000 TurboMax flyer EN · www.thermo2000.com
  2. Thermo 2000 TurboMax Specifications · www.thermo2000.com
  3. Thermo 2000 TurboMax Use & Care manual · www.thermo2000.com
  4. Thermo 2000 TurboMax Specifications · www.thermo2000.com
  5. Québec.ca, “Eau chaude”, updated November 5, 2025 (186 L/day, 7 °C water, 60 °C, volumes per use).
  6. Natural Resources Canada, water heater buying guide (75 L/person/day, first-hour rating).
  7. Québec Construction Code, Chapter III Plumbing, art. 2.2.10.7 (RBQ).
  8. CAA-Québec, “Chauffe-eau: quelle capacité choisir”, updated June 29, 2026.
  9. Hydro-Québec, LogisVert residential participation guide, version 1.10, September 15, 2026.

Costs shown are indicative estimates before tax.

A 50 US gallon indirect water heater with a large copper exchanger for simultaneous use

Some homes are short not so much on volume as on flow. Two bathrooms used at the same time, a multi-jet shower, a tub filling while the washing machine runs: it is instantaneous flow that makes the difference. The Thermo 2000 TurboMax 50-5 indirect water heater pairs a 50 US gallon tank with a 32.7 sq. ft. copper coil system and a maximum domestic hot water flow of 15 gpm. It is fed by an electric boiler. AirGreen installs it in Montreal, Laval, Longueuil, on the South Shore and on the North Shore.

A compact tank, a generous exchanger

The TurboMax 50-5 keeps the footprint of a 50 US gallon tank, at 60 3/4 in high and 22 in in diameter, but it houses an exchange surface of 32.7 sq. ft. Thermo 2000 describes this high-exchange-capacity copper coil system as a way to heat water instantly: domestic water is heated as it passes through the exchanger. The larger the surface, the more heat the exchanger can transfer at once, provided the boiler supplies it.

Manufacturer’s data

  • Capacity: 50 US gallons
  • Heat exchanger: copper coils, exchange surface of 32.7 sq. ft.
  • Water at 110 °F: maximum exchange capacity of 645,000 BTU/h (189 kW); 1,159 US GPH first hour; 1,109 US GPH continuous
  • Water at 140 °F: maximum exchange capacity of 455,000 BTU/h (133 kW); 569 US GPH first hour; 549 US GPH continuous
  • Water at 160 °F: maximum exchange capacity of 300,000 BTU/h (88 kW); 313 US GPH first hour; 302 US GPH continuous
  • Conditions: domestic cold water inlet at 40 °F, boiler supply at 180 °F
  • Maximum domestic hot water flow: 15 gpm
  • Maximum pressure: 150 psi
  • Connections: potable water 1 1/2 in male sweat; boiler 1 1/4 in NPT male
  • Dimensions: height 60 3/4 in, diameter 22 in
  • Weight: 230 lb

A 15 gpm flow when several taps open

The maximum domestic hot water flow shows how much hot water can leave the tank at a given moment. With 15 gpm, the TurboMax 50-5 is designed to supply several fixtures at the same time, which makes it a good candidate for a home with several bathrooms or a multi-jet shower. Thermo 2000 specifies that these values must be reduced for high-temperature and continuous-flow applications; we take this into account when sizing the piping and setting the thermostatic mixing valve.

Where the TurboMax 50-5 is the right choice

This model suits a large home heated by an electric boiler, where several people get ready at the same time in the morning. It also suits small businesses heated the same way: a hair salon rinsing continuously, a physiotherapy clinic with a few showers, a yoga studio. In these cases, it is not the reserve that is lacking, but the ability to deliver a lot of hot water at the same time.

For a home where hot water is mostly used one appliance at a time, a smaller exchanger is generally enough. We compare the options with you based on your real habits.

An electric boiler that matches the exchanger

The published exchange capacities, up to 645,000 BTU/h (189 kW) for water at 110 °F, describe what the exchanger can transfer at most. A residential electric boiler supplies much less, and it is the boiler that sets the real continuous output. In a home, the TurboMax 50-5 exchanger therefore rarely works at full capacity; its advantage shows mainly in its 15 gpm maximum flow. In a business equipped with a larger electric boiler, the exchanger can make more of it. In both cases, we check the electrical service and the available capacity before proposing a configuration.

Connections and location

Potable water connects in 1 1/2 in male sweat and the boiler in 1 1/4 in NPT male. The tank weighs 230 lb empty and, once filled, must sit on a solid, level floor, near a drain. Its 22 in diameter lets it take its place beside the boiler in most mechanical rooms. The tank drain valve, supplied as standard, simplifies maintenance. The control is connected to the boiler with hot water priority.

Simple yearly maintenance

One visit per year keeps the system reliable: a test of the relief valve, a check of the circulator and the control, an inspection of the fittings and a partial draining through the tank drain valve when the water carries sediment. In a business where hot water is used all day, we schedule this visit outside opening hours, so service to your customers is never interrupted.

Manufacturer’s warranty

Thermo 2000 offers a 15-year residential warranty, a 10-year commercial warranty and a 2-year warranty on mechanical components. The warranty that applies to your installation is confirmed in writing with the quote.

Installation of the Thermo 2000 TurboMax 50-5 by AirGreen

AirGreen is a family business established in Montreal and active in heating, ventilation and air conditioning for more than fifteen years. Our RBQ licence 5645-9605-01 covers ventilation, refrigeration and electrical work. Our work includes:

  • analysis of your simultaneous uses and of the electric boiler’s capacity;
  • assessment of the location, the floor and access to the drain;
  • removal of the old water heater;
  • connecting the potable water in 1 1/2 in, with thermostatic mixing valve and shut-off valves;
  • connecting to the boiler in 1 1/4 in, with a properly sized circulator, check valve and air vent;
  • the relief valve, its discharge pipe and, if needed, an expansion tank;
  • wiring the control, commissioning and maintenance advice.

We serve homes and businesses in Montreal, Laval, Longueuil, Outremont, Mount Royal, Boucherville, Blainville, L’Assomption and across the South Shore and the North Shore. Free on-site estimate, written quote and financing available.

Request your free quote for the Thermo 2000 TurboMax 50-5. Describe the appliances that run at the same time in your home: we will tell you whether this model is the right one.