Broan ERV BLP150E75NS-HW Air Exchanger | Montreal, Laval, Longueuil, South Shore and North Shore
Is it the right size for your home?
It delivers 146 cfm net, enough to ventilate 1,700 to 2,700 sq ft. Choose your home's living area.
It's the right size.
For a 1,500 to 2,500 sq ft home, about 105 cfm of air needs to be renewed continuously. This unit delivers 146 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.
Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.
What it does, in numbers
$16.59
Electricity per year
Less than a 60 W light bulb
Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.
Below the Code threshold for a new home. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 36% at 68 cfm. The requirement applies to new buildings and major renovations: for a replacement, talk to us about your project before choosing.
Airflow and efficiency at 0 °C: HVI directory, Section III. Efficiency at −25 °C: manufacturer's spec sheet. Cost: 17 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
HardwiredPermanent hardwired connection, 10 in profile
This HW version is permanently wired to the 120 V circuit, with no cord. At about 10 in thick, it mounts horizontally or on a wall using the four brackets supplied.
MirrorOne model for mirrored floor plans
The airflow direction is reversed with a single built-in switch (patent pending). For a builder doing mirrored units, that means one model to order and stock.
36%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 68 cfm.
ExhaustIt defrosts by pausing the fresh air for a few minutes
In cold weather, the supply fan stops for a few minutes while the exhaust keeps running, so warm indoor air thaws the core. During the cycle the house is briefly under negative pressure; if you have a fireplace or a naturally vented combustion appliance, mention it to our estimator.
ERVIt moves moisture too, not just heat
An ERV transfers some moisture between the two airstreams. Useful in a house that gets too dry in winter or takes on a lot of humidity in summer. The trade-off: it generally recovers less heat than a comparable HRV.
2005103Its HVI certification number
Listed in Section III of the Home Ventilating Institute's certified products directory. Anyone can check it, and it's the first condition for the Rénoclimat grant.
−9 cfmWhat the ducts cost it
Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 155 to 146 cfm. Most spec sheets show only the first number, precisely because it looks better.
17 WMeasured at the airflow it actually runs at
Its 84% at 0 °C is certified at 36 cfm, the continuous airflow of a typical home. At that setting it draws 17 W, or about 149 kWh a year.
5 yearsThe core warranty
The core does the work and is the most expensive part to replace. Motors and parts: 5 years. We register the warranty in your name at commissioning.
6 inWhat it needs on site
6 in ducts, side connection. It weighs 39 lb, and it needs enough clearance to slide the core out once a year.
Rénoclimat: $500 to install or replace an HRV or ERV
First condition met: HVI Section III certified, No. 2005103. Second: your EnerGuide rating must improve between the two evaluations. Québec warns that an air exchanger installed on its own can increase a home's energy use; that's why we balance it to the calculated airflow rather than running it at full speed.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- Net airflow at 0.2 in. w.g.
- 155 cfm
- Net airflow at 0.4 in. w.g.
- 146 cfm
- SRE at 0 °C (36 cfm)
- 84%
- SRE at −25 °C (68 cfm)
- 36%
- ASE at 0 °C
- 88%
- Power draw
- 17 W
- Efficacy
- 2.1 cfm/W
- Type
- ERV
- Connection
- Side ports
- Duct collars
- 6 in
- Defrost cycle
- Exhaust only (supply fan off)
- Filters
- Washable MERV 8 filtration included; optional 2-in disposable MERV 13 filter (V26000)
- Dimensions (L × D × H)
- 32 × 20.94 × 10.03 in
- Weight
- 39 lb
- Power supply
- 120 V
- HVI certification (Section III)
- 2005103
- Warranty — core
- 5 years
- Warranty — motors
- 5 years
- Warranty — parts
- 5 years
Net airflow, efficiency at 0 °C and power draw: Home Ventilating Institute certified products directory, Section III (HVID 2005103). Efficiency at −25 °C: manufacturer's spec sheet, since the HVI directory gives no value at that temperature. Annual consumption calculated at 17 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The next model down and up
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
Broan-NuTone BLP150E75NS-HW ERV – Residential Air Exchanger 155 CFM with Side Connection
At AirGreen, we know that good indoor comfort doesn’t depend solely on heating and air conditioning. In a well-insulated home, air can quickly become laden with moisture, odors, CO₂, and particles if air renewal is not properly controlled. This is precisely where a high-performance air exchanger becomes essential.
The Broan-NuTone BLP150E75NS-HW is an ERV — energy recovery ventilator — designed to improve indoor air quality while contributing to the overall comfort of the home. With a flow rate of 155 CFM at 0.4”, a maximum sensible recovery efficiency of 84.0%, a side connection, and hardwired power supply, this model represents a modern, compact, and efficient solution for homes in Montreal, Laval, Longueuil, the North Shore, and the South Shore.
Unlike a simple exhaust fan, the BLP150E75NS-HW enables smarter air renewal. It expels stale indoor air and brings in fresh outdoor air while recovering some of the energy already present in the outgoing air. The result: a better-ventilated home, more comfortable to live in and better suited to the realities of Quebec’s climate.
A modern ventilation solution for well-insulated homes
Modern homes are often very airtight to retain heat in winter and coolness in summer. This insulation is excellent for energy efficiency but can also reduce natural ventilation. Without an adequate air exchanger, moisture, cooking odors, indoor pollutants, and stale air can accumulate.
The Broan-NuTone BLP150E75NS-HW ERV helps solve this issue by ensuring a controlled supply of fresh air. It is especially appealing to homeowners who want to improve air quality without constantly opening windows, particularly during periods of intense cold or high humidity.
As a ERV, this model does more than just recover sensible heat. It also helps better manage energy related to indoor air, which can be beneficial in many homes where comfort, stability, and air quality are priorities.
Why choose the Broan-NuTone BLP150E75NS-HW?
The Broan-NuTone BLP150E75NS-HW is designed to simplify installation, adjustment, and maintenance while providing reliable ventilation. Its low-profile design and side connection allow for convenient integration into various residential mechanical spaces.
This model is particularly interesting when looking for a device that is compact, powerful, and well designed. Its flow rate of 155 CFM is suitable for several residential applications, provided the device is properly sized according to the area, number of occupants, insulation level, and duct configuration.
Important point: the choice of an air exchanger should never be made solely based on the CFM flow rate. You must also consider indoor humidity, available space, duct type, maintenance accessibility, and the real ventilation needs of the house.
Main technical features
Here is the important information about the Broan-NuTone BLP150E75NS-HW model:
Model: BLP150E75NS-HW
Type of air exchanger: VRE
Energy Star: No
Voltage: 115 V
Dimensions: 32.00 × 20.94 × 9.97 in
Manufacturer’s warranty: 5-1-0
Defrost cycle: Ventilation
Maximum sensible recovery efficiency: 84.0%
Airflow: 155.0 PCM / CFM at 0.4”
Connection: Side
Power supply: Hardwired / direct connection
These characteristics make the BLP150E75NS-HW a device well suited for homes that require effective, stable ventilation well integrated into a limited mechanical space.
A flow rate of 155 CFM for effective residential ventilation
With a capacity of 155 PCM / CFM, the Broan-NuTone BLP150E75NS-HW offers an airflow sufficient for several types of residences. This level of performance allows for constant indoor air renewal when the installation is well designed.
A flow rate that is too low may not be sufficient to remove moisture or stale air. Conversely, a device that is too powerful may be unnecessarily oversized and less well suited to certain homes. The BLP150E75NS-HW positions itself as a balanced choice for many residential installations.
At AirGreen, we always analyze the real needs before recommending a model. Good ventilation starts with proper sizing, a well-planned duct network, and precise balancing.
Maximum sensible recovery efficiency of 84.0%
One of the great advantages of the Broan-NuTone BLP150E75NS-HW is its maximum sensible recovery efficiency of 84.0%. This figure indicates that the device is capable of recovering a significant portion of the energy contained in the exhausted air.
In winter, this recovery is particularly useful. It allows fresh air to enter while limiting heat loss. In a house located in Montreal, Laval, Longueuil, on the North Shore or the South Shore, this efficiency represents an important advantage for maintaining good indoor comfort.
High sensible recovery helps ventilate the home without unnecessarily wasting energy already produced by the heating system.
VIRTUO™ technology for intelligent balancing
The Broan-NuTone BLP150E75NS-HW is part of the Broan ONE series, designed to simplify installation and ensure better-controlled ventilation. Its VIRTUO™ technology allows for self-balancing and more precise airflow adjustment.
Balancing is an essential step during the installation of an air exchanger. If the incoming and outgoing air are not well adjusted, performance can be reduced and indoor comfort can be affected. Thanks to VIRTUO™ technology, the device helps maintain more stable operation over time.
For homeowners, this means more consistent ventilation. For installers, it allows for faster, more precise, and more reliable commissioning.
Built-in LCD screen and precise airflow selection
The BLP150E75NS-HW is also equipped with a built-in LCD screen, a very practical element during installation and adjustment. This screen allows intuitive airflow selection and makes it easier to read useful information about the device's operation.
This feature is particularly interesting for installations where precision is important. The technician can adjust the airflow according to the home's actual needs, contributing to better overall performance.
A well-adjusted air exchanger offers more stable, comfortable, and efficient ventilation in the long term.
ECM PMSM motors: efficiency and reliability
The Broan-NuTone BLP150E75NS-HW is equipped with ECM PMSM motors, designed to provide effective ventilation with reduced electrical consumption. These motors help maintain reliable airflow while optimizing energy use.
In a home where the air exchanger operates regularly, the quality of the motors is an important aspect. Efficient motors contribute to the system's durability, indoor comfort, and airflow stability.
This type of motorization is particularly appreciated in modern devices because it combines performance, precision, and energy efficiency.
Ventilation defrost: essential for the Quebec climate
The BLP150E75NS-HW uses a ventilation defrost cycle, an important feature in a cold climate like Quebec's. When outdoor temperatures drop very low, an air exchanger can be exposed to frost formation.
Defrosting helps protect the recovery core and maintain proper device operation during winter. This function is crucial to ensure reliable ventilation during cold periods, especially in well-insulated homes where the air exchanger runs regularly.
A good defrost system is essential for stable performance during the winters in Montreal, Laval, Longueuil, the North Shore, and the South Shore.
MERV 8 filtration included
The Broan-NuTone BLP150E75NS-HW is designed with MERV 8 filtration, which helps trap certain particles and protect the device’s internal components. Good filtration helps maintain stable airflow and consistent performance.
As with any air exchanger, filter maintenance is very important. Dirty filters can reduce airflow, increase motor effort, and decrease overall system efficiency.
At AirGreen, we recommend regularly checking and cleaning the filters based on actual device use, presence of pets, dust in the home, and manufacturer recommendations.
Convenient lateral connection for many installations
The lateral connection of the Broan-NuTone BLP150E75NS-HW facilitates its integration into many residential setups. In some basements, mechanical rooms, or technical spaces, ducts must be directed to the sides rather than upwards.
This configuration can simplify installation, especially when replacing an old air exchanger or when available space is limited. It also allows for a cleaner installation when the existing duct network favors a lateral orientation.
The right connection can make a big difference in the final quality of the installation. That’s why we always check the site configuration before recommending a specific model.
A low-profile and easy-to-integrate design
With its dimensions of 32.00 × 20.94 × 9.97 in, the Broan-NuTone BLP150E75NS-HW offers a low-profile design suitable for many residential mechanical spaces. Its reduced height is an advantage when space is limited or when installation must be done in a compact technical area.
However, sufficient access must be planned for maintenance, filter replacement, core inspection, and future checks. A well-planned installation makes maintenance easier and helps extend the device's lifespan.
At AirGreen, we place great importance on system accessibility. A high-performance air exchanger must also be easy to maintain.
Hardwired power supply: a clean and permanent installation
The BLP150E75NS-HW model is a hardwired version, meaning it is designed for direct connection. This setup is often preferred in permanent installations where a cleaner finish and more discreet electrical integration are desired.
This version stands out especially from models with power cords, as it is designed for direct wired installation according to applicable standards. For a new home, major renovation, or planned replacement, this approach can offer a more professional solution.
A compliant electrical installation is essential for the system’s safety, reliability, and durability.
Advantages of the Broan-NuTone BLP150E75NS-HW
The Broan-NuTone BLP150E75NS-HW VRE offers several important advantages:
155 CFM airflow, suitable for many residential homes
Maximum sensible recovery efficiency of 84.0%
VRE type, for more comprehensive energy management related to ventilation
Side connection, convenient for multiple configurations
Low-profile design, easy to integrate into various mechanical spaces
VIRTUO™ technology, for smarter balancing
Built-in LCD screen, useful for settings and data reading
ECM PMSM motors, efficient and reliable
MERV 8 filtration, to protect the system
Defrost cycle by ventilation, adapted to winter conditions
Hardwired power supply, for a clean and permanent installation
5-1-0 Manufacturer Warranty, according to the manufacturer's conditions
These features make the BLP150E75NS-HW a solid option for homeowners who want to improve indoor air quality with a modern, compact, and well-designed device.
Professional installation by AirGreen
Choosing the right air exchanger is important, but installation is just as crucial. A high-performance device can lose much of its efficiency if it is poorly connected, poorly balanced, or poorly adapted to the home's layout.
At AirGreen, we install ventilation, air conditioning, heating, and HVAC systems throughout Greater Montreal. Our team understands the realities of Quebec homes: finished basements, limited mechanical spaces, existing ducts, old air exchangers to replace, excessive humidity, well-insulated new homes, and specific needs depending on each property.
We serve, among others:
Montreal
Laval
Longueuil
Boucherville
Brossard
Saint Bruno
Repentigny
Terrebonne
Saint-Eustache
North Shore
South Shore
Our goal is simple: to provide a clean, durable installation tailored to the real needs of each home.
Why trust AirGreen?
At AirGreen, we don’t just install a device. We analyze the entire home to propose a coherent and sustainable solution.
We assess the area, number of occupants, insulation level, indoor humidity, duct configuration, mechanical accessibility, and homeowner expectations. This approach allows us to recommend a suitable air exchanger and perform a professional installation.
A good air exchanger must be well chosen, well installed, and well balanced. This combination ensures effective ventilation and lasting comfort.
A smart choice to improve indoor air quality
The Broan-NuTone BLP150E75NS-HW is an excellent option for homeowners seeking a modern, compact, and efficient HRV. With its 155 CFM airflow, maximum sensible recovery efficiency of 84.0%, side connection, and VIRTUO™ technology, it meets the needs of many Quebec residences very well.
In a well-insulated home, an air exchanger is often essential to maintain good indoor air quality. It helps remove stale air, reduce excess humidity, limit persistent odors, and bring in fresh air in a controlled way.
For homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore, the BLP150E75NS-HW represents a solid solution when properly sized and installed by professionals.
In conclusion
The Broan-NuTone BLP150E75NS-HW HRV is a well-designed, compact, and efficient residential air exchanger. With its 155 CFM airflow, maximum sensible recovery efficiency of 84.0%, side connection, ventilation defrost cycle, VIRTUO™ technology, and hardwired power supply, it offers a reliable ventilation solution for modern homes.
At AirGreen, we pride ourselves on offering ventilation solutions tailored to the real needs of our customers. Whether replacing an old air exchanger or installing a new HVAC system, our team supports you with precision, seriousness, and professionalism.
Contact AirGreen today to learn more about installing the Broan-NuTone BLP150E75NS-HW and discover the best ventilation solution for your home.