FANTECH VHR 200R EC Air Exchanger Greater Montreal

In stock
207 cfm net2,400 to 3,900 sq ft65% at −25 °C
Talk to an HVAC technician · 514 316-2973
Meets the Québec CodeLifetime core warranty
01 · Your home

Is it the right size for your home?

It delivers 207 cfm net, enough to ventilate 2,400 to 3,900 sq ft. Choose your home's living area.

It's the right size.

For a 2,500 to 3,200 sq ft home, about 150 cfm of air needs to be renewed continuously. This unit delivers 207 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.

Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.

02 · Performance

What it does, in numbers

Heat recovery
65%
At −25 °CCode: 54% minimum
70%
At 0 °CMeasured at 75 cfm
Net airflowThe ducts cost it 15 cfm
0.2 in · test bench222 cfm
0.4 in · with ducts207 cfm

$37.09

Electricity per year

Less than a 60 W light bulb

Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.

38W
Running continuously
333kWh
Per year
3months
Filter cleaning

Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 65% at 75 cfm.

Airflow and efficiency: manufacturer's published data. Cost: 38 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).

03 · Good to know

What you should know about this one

Published, verifiable facts, not brochure claims.

MERV 13Factory MERV 13 pleated filter on the supply air

Supply air goes through a 10.75 × 14.75 × 0.75 in MERV 13 pleated filter, and exhaust air through a washable electrostatic filter. Among the Fantech units in this catalogue, it is the only one shipped with a MERV 13 filter.

ECMECM motors: 38 W at 75 cfm

Its two electronically commutated motors draw 38 W at 75 cfm, versus 60 W at 73 cfm for the standard-motor VHR 200R, per Fantech's sheets. It also moves more air: 207 cfm at 0.4 in instead of 173.

65%What it still recovers at −25 °C

The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 75 cfm.

DamperIt defrosts without depressurizing the house

In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.

HRVIt recovers heat, not moisture

Excess moisture leaves the house. In Québec, that's the right choice in most cases: in winter, the problem is almost always too much humidity, not too little.

−15 cfmWhat the ducts cost it

Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 222 to 207 cfm. Most spec sheets show only the first number, precisely because it looks better.

38 WMeasured at the airflow it actually runs at

Its 70% at 0 °C is measured at 75 cfm, the continuous airflow of a typical home. At that setting it draws 38 W, or about 333 kWh a year.

LifetimeThe core warranty

The core does the work and is the most expensive part to replace. Motors: 7 years. Parts: 5 years. We register the warranty in your name at commissioning.

6 inWhat it needs on site

6 in (oval) ducts, top connection and a condensate drain. It weighs 66 lb, and it needs enough clearance to slide the core out once a year.

04 · Installation

What it needs on site

6 in (oval) ductsCollar diameter
Top connectionTop ports
Condensate drainRequired
66 lbUnit weight
28 × 17 × 20.5 inLength × depth × height
120 VPower supply

In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.

Complete spec sheetData and cited sources
Net airflow at 0.2 in. w.g.
222 cfm
Net airflow at 0.4 in. w.g.
207 cfm
SRE at 0 °C (75 cfm)
70%
SRE at −25 °C (75 cfm)
65%
ASE at 0 °C
76%
Power draw
38 W
Efficacy
2.0 cfm/W
Type
HRV
Connection
Top ports
Duct collars
6 in (oval)
Condensate drain
Required
Defrost cycle
Recirculation (motorized damper)
Filters
1 MERV 13 pleated filter (supply) + 1 washable electrostatic filter (exhaust)
Dimensions (L × D × H)
28 × 17 × 20.5 in
Weight
66 lb
Power supply
120 V
Warranty — core
Lifetime
Warranty — motors
7 years
Warranty — parts
5 years

Airflow and efficiency: manufacturer's published data. Annual consumption calculated at 38 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.

05 · In the same family

The next model down and up

Talk to an HVAC technician before you choose

We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.

The Fantech VHR 200R EC Air Exchanger: A Quality Choice for Your Comfort

As an HVAC company based in Montreal, AirGreen is dedicated to selling and installing high-quality air exchangers. One of our flagship products is the Fantech VHR 200R EC, a Heat Recovery Ventilator (HRV) with Electronically Commutated Motors (ECM). This article will give you a comprehensive overview of the features and benefits of this innovative system.

Fantech VHR 200R EC: Advanced Technology for a Healthier Indoor Air

The Fantech VHR 200R EC stands out for its ECM technology, which offers energy savings regardless of the airflow demand. This intelligent motor with integrated electronic controls reduces energy usage, leading to lower operating costs. Additionally, ECM motors produce less heat, which means less maintenance and a longer lifespan.

The Specifications of Fantech VHR 200R EC

  • Duct size: 6" (153 mm) oval
  • Weight: 66 lbs (30 kg) including the core
  • Voltage/Phase: 120/1
  • Power rated: 200 W
  • Ampere: 2.0 A
  • Average airflow: 207 cfm (98 L/s) at 0.4” Ps (100Pa)

Electronically Commutated Motors (ECM)

The Fantech VHR 200R EC is equipped with two ECM motors. These motors operate at high efficiency levels and offer substantial energy-saving potential, not only at full load but especially at part load. The energy used is significantly lower than that of an equivalent output AC motor, which guarantees a reduction in operating costs.

Heat Recovery Core

The aluminum heat recovery core is designed for efficient cross-flow ventilation. It measures 12" x 12" (305 x 305 mm) with a 15" (380 mm) depth. Cores are manufactured to withstand extreme temperature variations.

Wintergard™ Defrost System

The VHR 200R EC incorporates a unique and quiet internal recirculation defrost that does not depressurize the home during the defrost cycle. A preset defrost sequence is activated when the outdoor temperature falls below 23° F (-5° C) and automatically adjusts itself based on operating conditions. The fan speed is also automatically adjusted to provide a smooth and quiet transition between Ventilation & Defrost mode.

Accessibility and Maintenance

The core, filters, fans, drain pan, and electrical panel can be easily accessed from the access panel. The core conveniently slides out with only 17" (432 mm) clearance.

Duct Connections

The VHR 200R EC has 6" (152 mm) oval plastic duct connections with integrated balancing dampers and airflow measurement ports.

Filters

The VHR 200R EC features one MERV13 pleated filter for the supply air and one washable electrostatic panel type air filter for the exhaust air.

Warranty

A limited lifetime warranty on the aluminum core, 7 years on motors, and 5 years on parts.

An Eco-Friendly and High-Performance Choice for Your Home

The VHR 200R EC, like all Fantech products, is designed to maximize energy efficiency while improving indoor air quality. It's compact yet powerful, making it ideal for meeting your home's principal ventilation needs. With the addition of control options like Eco-Touch™, EDF7, RTS2, and RTS5, you can customize your system's use to meet your specific needs.

Investing in the VHR 200R EC is a smart choice for those looking to improve their home's air quality while realizing significant energy savings. The system is built with superior quality materials and is designed to withstand extreme temperature variations, thus ensuring its longevity.

In the end, the Fantech VHR 200R EC is more than just an air exchanger: it's an investment in the health, comfort, and well-being of your home. At AirGreen, we're proud to offer this high-quality product to our customers.