Ground Stand for Central Heat Pump
The ground stand that holds a central heat pump’s outdoor unit above the snow.
AirGreen codeAG-SP-00601
514 316-2973 · sales@airgreen.ca
Quick facts
The ground stand for central heat pump holds the outdoor unit of a central heat pump above the ground. It is available in two sizes, 21 × 32 in and 16 × 28 in, for units wider than those of wall-mounted heat pumps.
Why a central heat pump must be raised
A central air conditioner only works in summer; a slab at ground level is enough for it. A central heat pump, on the other hand, heats the house all winter. Its outdoor unit defrosts regularly and releases water that has to drain under the unit. Set too low, it ends up in the snow, air circulates poorly and ice builds up. The stand keeps the unit clear, season after season.
Choosing the size
- 21 × 32 in
- 16 × 28 in
The size is chosen based on the outdoor unit’s footprint and weight, given in its manual. We confirm it with the exact model of your unit.
Installation tips
The stand sits on a stable, level base: slab, pavers or compacted gravel. On a membrane or fragile pavers, add plastic foot pads under each leg, and anti-vibration pads between the unit and the stand. Respect the clearances required by the heat pump manufacturer.
Supplied and installed by AirGreen across Greater Montréal
Our refrigeration technicians install the stand and the outdoor unit when installing your central heat pump in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the size and quantity you need.
A central heat pump that heats all winter
A central heat pump outdoor unit must stay above the snow to run and defrost properly.
- Central heat pump outdoor units
- Replacing a central air conditioner with a heat pump
- Spots where snow piles up against the house
- Placement on a slab, pavers or compacted gravel
2 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Dimensions | AirGreen code |
|---|---|
| 21 × 32 in | AG-SP-00601 |
| 16 × 28 in | AG-SP-00602 |
Stand dimensions, in inches. The size depends on the outdoor unit.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Check the outdoor unit’s footprint and weight in its manual before choosing a size.
- Set the stand on a stable, level base.
- Plastic feet protect a membrane or pavers under the legs.
- Keep the clearances the equipment maker asks for.
You may also need
Plastic Foot Pads for Ground Stand (3 × 3 in)
Rubber Anti-Vibration Pads – Box of 48
3 in Thick Condenser Pad
Outdoor Disconnect Switch for Heat Pump
Copper Pipe Clamp
Plastic End Caps for Wall Bracket – Box of 50
Protective Roof Extension for Two-Fan Units
Red Flashing – 10 ft RollBrackets and protectionSee all
Frequently asked questions
Which size do I need?
It depends on the outdoor unit’s footprint and weight, listed in its manual. Send us your central heat pump model and we confirm the size.
Why not just a slab?
An air conditioner only runs in summer. A central heat pump heats all winter: set too low, it ends up in the snow and defrost water freezes under it.
Does the stand need to be fastened?
It must sit on a stable, level base. Depending on the location and the wind, our technicians anchor or weigh it down.
Can you install it?
Yes. Our technicians set up the stand and the outdoor unit when they install your central heat pump, everywhere in Greater Montréal.
Solid footing for your central heat pump
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.