Rubber Anti-Vibration Pads – Box of 48
The rubber pad that goes between the outdoor unit and its support to cut vibration.
AirGreen codeAG-SP-008
514 316-2973 · sales@airgreen.ca
Quick facts
Rubber anti-vibration pads go between the feet of the outdoor unit and its support: wall bracket, ground stand or pad. They dampen compressor and fan vibration before it travels into the wall or the slab. They are sold in boxes of 48.
Less noise in the house
A wall-mounted outdoor unit transmits its vibration to the structure. In a plex or a row house, it can sometimes be heard all the way into a bedroom or next door, especially at night when the compressor runs at low speed. A rubber pad under each support point breaks this rigid contact between the unit and the bracket. It also keeps metal from rubbing against metal.
How to install them
- One pad under each support point of the unit, usually one per mounting foot.
- If the mounting bolt goes through the pad, tighten without crushing it completely.
- Follow the unit manufacturer’s mounting instructions.
When to replace them
With sun, cold and the years, rubber hardens or cracks. A crushed pad no longer does its job. During maintenance, our technicians check their condition and replace them as needed. A box of 48 covers several units.
Supplied and installed by AirGreen across Greater Montréal
Our refrigeration technicians install the pads with the outdoor unit on every heat pump installation in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the number of boxes you need.
Stop vibration at the source
The outdoor unit’s compressor and fan vibrate; without pads, the support passes that vibration into the building.
- Outdoor units on a wall bracket
- Units on a ground stand or a pad
- Units installed near a bedroom or a party wall
- Replacing hardened or crushed pads
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Place a pad under each bearing point of the outdoor unit.
- If the mounting bolt goes through the pad, do not tighten to the point of crushing it flat.
- A hardened or cracked pad no longer does its job: replace it.
- Follow the equipment maker’s mounting instructions.
You may also need
Wall Bracket for Heat Pump Outdoor Unit
Heavy-Duty Wall Bracket for Heat Pump (115 or 200 lb)
Adjustable Ground Stand for Outdoor Unit
Plastic End Caps for Wall Bracket – Box of 50
Copper Pipe Clamp
Protective Roof Extension for Two-Fan Units
3 in Thick Condenser Pad
Red Flashing – 10 ft RollLine sets, brackets, cover, drain, disconnect and cable on one page.See the kitSame category
Brackets and protectionSee all
Frequently asked questions
How many per unit?
One under each bearing point of the outdoor unit, usually one per mounting foot. A box of 48 covers several units.
Is it useful on a ground stand?
Yes. The pad reduces vibration carried into the stand and the slab, and keeps metal from rubbing on metal.
My unit makes noise inside the house: is this the cause?
It is a common cause when the unit is wall-mounted. Other causes are possible: a service visit finds the source.
Can you install it?
Yes. Our technicians fit the pads with the outdoor unit during the installation and can replace them during maintenance, everywhere in Greater Montréal.
A quieter outdoor unit
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.
