Heavy-Duty Wall Bracket for Heat Pump (115 or 200 lb)
The reinforced wall bracket for heavy outdoor units, available in a 115 lb or 200 lb capacity.
AirGreen codeAG-SP-00201
514 316-2973 · sales@airgreen.ca
Quick facts
The heavy-duty wall bracket is the reinforced version of our outdoor unit bracket. It comes in two capacities, 115 lb or 200 lb, to mount on the wall the units that are too heavy for a standard bracket: large outdoor units and multi-zone systems. It is sold individually; you need two per unit.
When to choose a reinforced bracket
A multi-zone unit serving three or four rooms weighs a lot more than a small single-zone unit. On the wall, that weight adds to the snow, the ice and the compressor's vibration, winter after winter. A bracket sized with some margin keeps the unit level and firmly in place.
115 lb or 200 lb
- Find the weight of the outdoor unit on its nameplate or in its manual.
- Choose a capacity well above that weight.
- If in doubt, take the 200 lb capacity or ask us to check.
An installation that lasts
A heavy unit needs solid anchoring, chosen to suit the wall: brick, concrete or wood frame. Anti-vibration pads between the unit and the rails reduce the noise transmitted into the house. For most single-zone units, our standard wall bracket is enough.
Installed by AirGreen in Greater Montréal
Our refrigeration technicians install this bracket with the outdoor unit when installing your heat pump or multi-zone system in Montréal, Laval, Longueuil, on the South Shore and the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the capacity and the quantity.
For outdoor units that weigh a lot
Multi-zone units and large compressors call for a sturdier bracket than a standard wall bracket.
- Multi-zone outdoor units serving two, three zones or more
- Large outdoor units of wall-mount heat pumps
- Wall installations where a standard bracket would be too light
- Replacing an old, undersized bracket
2 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
Load capacity of the model. Choose it from the outdoor unit’s weight.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- The outdoor unit’s weight is on its nameplate or in its manual.
- Choose a capacity well above the unit’s weight.
- Plan two brackets per outdoor unit.
- A heavy unit needs solid anchoring: check what the wall is made of before mounting.
- Add anti-vibration pads between the unit and the rails.
You may also need
Wall Bracket for Heat Pump Outdoor Unit
Rubber Anti-Vibration Pads – Box of 48
Plastic End Caps for Wall Bracket – Box of 50
Protective Roof for Heat Pump Outdoor Unit
Protective Roof Extension for Two-Fan Units
Copper Pipe Clamp
3 in Thick Condenser Pad
Red Flashing – 10 ft RollBrackets and protectionSee all
Frequently asked questions
115 lb or 200 lb: which one?
Compare with the outdoor unit’s weight, on its nameplate or in its manual, and take a capacity well above it. If in doubt, send us the model and we check.
How many brackets do I need?
Two per outdoor unit. The bracket is sold individually.
Do I need it for a small wall-mount heat pump?
Usually not: our standard wall bracket is enough for most single-zone outdoor units. The heavy-duty model is meant for heavy equipment.
Can you install it?
Yes. Our technicians mount it with the outdoor unit when they install your system, everywhere in Greater Montréal.
A bracket that matches your multi-zone unit
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.