FUJITSU Aquila R32 Dual Zone Heat Pump | 24,000 BTU | Montreal, Laval, South Shore, North Shore
The Fujitsu Aquila R32 24 000 multi-zone heat pump heats and cools 2 rooms with a single outdoor unit. it delivers 15,600 BTU/h at −8 °C, heats down to −15 °C and qualifies for a $1,872 LogisVert grant. Installed by AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
2 rooms, one outdoor unit.
Compared with the 59 multi-zone systems of 24,000 BTU we sell. Every number on this page carries its source.
Before the numbers, watch it run.
Turn rooms on and off. Watch the power being shared.
One outdoor unit supplies every head: when several rooms call at once, they share its capacity. Pick an outdoor temperature.
Tell us your rooms. We tell you if this size is enough.
Pick the number of rooms and their size. The estimate targets a −15 °C day; it is a guide, the real calculation is done room by room at your home.
The whole series at a glance: find the box that fits you.
Each box is a product: the outdoor unit’s size, and the number of heads.
At −15 °C, it still delivers 80 % of its rated capacity.
Tap a temperature: certified capacity, efficiency and the cost of one hour of heating.
It slows down, it speeds up: the certified modulation range
Light bar: from minimum to maximum capacity. Dark mark: the rated value.
At every temperature, cheaper than baseboards.
Cost of one hour at full output, for the same heat delivered. Hydro-Québec Rate D, second tier: 11.142 ¢/kWh.
The official ratings, on the same scales as before.
SEER2, HSPF2 and EER2 come from the AHRI certification. The mark shows the median of the same-size multi-zone systems we sell.
A grant you can calculate, not guess.
The capacity at −8 °C comes from Hydro-Québec’s list of October 1, 2026. $120 per 1,000 BTU/h is the rate for ENERGY STAR cold-climate heat pumps (guide v1.10).
Where it ranks among same-size multi-zone systems.
Compared with the 59 multi-zone systems of 24,000 BTU we sell, using the LogisVert list figures. Weaknesses too, said plainly.
Against three other brands in its class.
Same rated size, other manufacturers. Pick the opponent.
One multi-zone or several wall units? Both sides, honestly.
We compare both options on your floor plan during the estimate.
What to know before installing a multi-zone system.
Dimensions, wiring and lines, drawn. Then our six steps.
The outdoor unit, dimensioned
One circuit for the whole house
Published sound levels, on one scale.
We use the outdoor figure to choose where the unit goes.
What is particular about this machine.
Only facts published by ENERGY STAR, NEEP or the manufacturer.
Every number, and where it comes from.
Each line carries its source; a line with no published value is not shown.
The manufacturer’s documentation, as PDF.
Everything we have written about this system.
Optimizing residential comfort: energy-efficient performance from Fujitsu
In a market increasingly focused on energy efficiency and customized comfort, the FUJITSU Aquila R32 | 24,000 BTU DoubleZone heat pump is a solution of choice for homeowners in Montreal, Laval, the South Shore and the North Shore. At AirGreen, we have integrated this model into our product line because of its advanced technology, installation flexibility and its ability to efficiently serve two separate zones , even in harsh weather conditions.
A 2-zone configuration for tailor-made comfort
One of the great advantages of this heat pump is its ability to cool or heat two different zones of your home. Thanks to the many possible combinations of wall heads— 7+7, 7+9, 9+12, 12+12 , etc.—we can customize each installation to meet your specific needs.
Unparalleled flexibility for residential projects
We recently installed this system in a Longueuil duplex where the owners wanted to heat the living room and master bedroom separately. By opting for the 9+12 configuration, we were able to adjust the capacity of each zone based on the area to be served. The result: a significant reduction in energy consumption while improving daily comfort.
INVERTER technology and R-32 refrigerant: efficient and environmentally friendly
The FUJITSU Aquila heat pump 's variable-speed compressor uses inverter technology, allowing it to continuously adjust power to meet actual demand. This means fewer on/off cycles, improved unit durability , and lower electricity consumption .
Additionally, R-32 refrigerant, with a lower global warming potential (GWP) , is a much more environmentally friendly solution than older gases used in air conditioning systems.
Key technical features to remember
-
Cooling capacity : 24,000 BTU
-
SEER2 : 23.0
-
HSPF2 : 10.5
-
EER2 : 13.0
-
High efficiency INVERTER compressor
-
ENERGY STAR® rated , Cold Climate certified
-
R-32 refrigerant gas , more environmentally friendly
-
Heating operation down to -15°C
-
WiFi compatibility (optional)
-
Voltage : 220V
-
Exterior noise level : 52 dB(A)
-
Warranty : 10 years (parts and compressor), 10-10-10 option available
Compact and quiet outdoor unit
The outdoor unit (model AOUH24KWAS3 ) is designed to fit easily into all types of homes , even in dense urban areas like Montreal. Its compactness (32.31 x 12.38 x 28.19 inches) and discreet operation are particularly appreciated by customers sensitive to ambient noise.
At AirGreen, we installed this unit in a terraced residence in Laval where space was limited and the neighbors were very close. Thanks to its 52 dB in heating mode , the customer noticed an immediate improvement in the tranquility of her backyard.
A device designed to face Quebec winters
The FUJITSU Aquila R32 24,000 BTU heat pump is perfectly suited to Quebec's harsh climate . With a heating capacity maintained down to -15°C , it is suitable for North Shore winters as well as for coastal residences on the South Shore.
LogisVert Grant: up to $780 in savings
This model is eligible for the provincial LogisVert grant , with an amount of up to $780 (updated May 1, 2025). AirGreen takes care of all the administrative procedures to ensure you receive this financial assistance, which is often overlooked but very advantageous.
Examples of successful installations by AirGreen
We installed this dual zone heat pump at:
-
Brossard : in a two-story house, 12+12 configuration for the living room and master bedroom.
-
Ahuntsic (Montreal) : in a 1,100 sq. ft. condo with a 9+9 configuration, an ideal solution for opposite rooms.
-
Boisbriand (North Shore) : installation in a bungalow with a 12+18 configuration for the basement and upper floor.
In each case, customer satisfaction was immediate , particularly for the increased comfort , the reduction in energy bills , and the absence of an initial deposit required by AirGreen .
Why choose AirGreen for the installation of your FUJITSU Aquila heat pump?
-
Free home evaluation throughout Montreal, Laval, Longueuil, South Shore and North Shore
-
No advance or deposit required – you only pay at the end, when you are fully satisfied
-
Clear and transparent offer before the work , with no hidden costs
-
Certified and experienced technicians , specialized in the installation of multi-zone systems
-
Fast and efficient after-sales service , supported by in-depth knowledge of each product
Practical tips for getting the most out of your dual zone installation
-
Have your filters cleaned regularly : this extends the lifespan of your wall heads.
-
Install the indoor units high up for optimal air diffusion.
-
Schedule an annual maintenance with AirGreen : our technicians will check pressures, drains, and perform a deep cleaning.
AirGreen: your HVAC expert for the entire Greater Montreal region
At AirGreen, we do more than just install heat pumps. We support our customers every step of the way —from product selection and installation to annual maintenance. With our field expertise , service centers in Montreal and Boucherville, and transparent approach, we pride ourselves on delivering customized, high-performance, and sustainable solutions .
Are you looking for a high-performance dual-zone heat pump for your home or condo in Montreal, Laval, Longueuil, or on the South Shore / North Shore? Contact us today for a free, no-obligation quote.
What people ask us about multi-zone systems.
Can I heat one room and cool another at the same time?
No. On a multi-zone system like this one, every head works in the same mode, heating or cooling. Each room still keeps its own set temperature.
What happens when every room calls for heat?
They share the outdoor unit’s capacity: 15,600 BTU/h at −8 °C, 19,200 at −15 °C.
How many heads can I connect?
Up to 3 on this outdoor unit. This product is configured for 2 heads.
Can I mix head sizes?
Yes. The “Zones” menu offers 13 combinations, from 7+7 to 15+15 (in thousands of BTU). Each head is sized for its room.
How much is the LogisVert grant?
$1,872 according to Hydro-Québec’s list of October 1, 2026. The grant never exceeds 100 % of the cost before taxes; apply within 9 months of installation.
Is it ENERGY STAR certified?
Yes, cold climate, ID 3627392. It also meets the ENERGY STAR Most Efficient criteria, according to the ENERGY STAR database.
Down to what temperature does it heat?
Down to −15 °C.
Is it noisy?
Indoors, the reference head goes down to 19 dB(A). Outdoors, 52 dB(A): we place the unit away from bedroom windows.
Why a multi-zone instead of several wall units?
One outdoor unit on the wall and one circuit. In return, the rooms share the capacity, and if the outdoor unit stops, every zone stops.
What does the warranty cover?
Our sheet lists 12 years on the compressor and 12 years on parts; labour is not included by the manufacturer. AirGreen extended warranty: possible.
A multi-zone system is planned room by room. At your home.
We measure every room, draw the line route and choose the right head for each zone. The on-site estimate is free and the quote arrives within 24 h.