KINGHOME Multi-Zone R32 One-Way Ceiling Cassette | 20,000 BTU
The largest one-way cassette, for commercial spaces and very deep open areas
A hair salon on a commercial street, a neighbourhood clinic, a small shop with a storefront window, an open-plan office on the second floor of a mixed-use building: these spaces share an often-dropped ceiling, walls taken up by counters, shelving or workstations, and a deep shape, longer than it is wide. The KINGHOME one-way ceiling cassette, in its 20,000 BTU size, is the highest-capacity head in the linear series. It's installed near the storefront or the entrance and pushes air toward the back of the space.
In residential settings, we choose it for very deep open areas, like a ground floor where the kitchen, dining room and living room are lined up, or a large basement finished from end to end. On the South Shore and in Laval, it's also a solution for recent additions where a single long room has been added to the back of the house.
A multi-zone heat pump head, never a stand-alone unit
This cassette is an indoor unit for a KINGHOME Ultra Heat R-32 multi-zone heat pump. It has no dedicated outdoor unit, no AHRI number and no efficiency rating of its own. Its 220 V power and its refrigerant come from the outdoor unit, which also serves the other zones. The certified performance therefore belongs to the complete system.
Compatibility calls for a clarification. The manufacturer's table lists the head sizes each outdoor unit accepts, and the 20,000 BTU size doesn't appear there as a separate column. The 18,000 BTU heads connect starting with the KM30X6O, and the 21,000 and 24,000 BTU heads starting with the KM36X6O. For a 20,000 BTU head, we therefore design the system around one of these units:
- KM36X6O, up to 4 zones;
- KM42X6O or KM48X6O, up to 5 zones;
- KM60X6O, up to 6 zones.
We confirm every combination with the manufacturer's selection before giving you a quote. The 36,000 to 48,000 BTU units carry the ENERGY STAR cold climate designation and heat down to -30 °C; the 60,000 BTU unit doesn't carry this designation, and we take that into account in the choice.
The same slim housing, with more airflow
The entire one-way series shares the same housing: 38.86 in. long, 15.16 in. wide, 7.01 in. deep. For a commercial space, that's a concrete advantage: the unit fits into a shallow drop-ceiling plenum, between the sprinklers, the light fixtures and the electrical raceways, without having to lower the grid. The linear panel, with its closed air intake and wave texture, stays discreet above a counter or a storefront window, and the manufacturer offers several panel options.
The cross-flow blade and the internal air duct direct the air along the length of the space. Mounted above the entrance, the cassette also acts as a barrier against the cold air that comes in every time the door opens in January.
Spec sheet data
- Nominal capacity: 20,000 BTU
- Maximum airflow: 441 CFM
- Indoor sound level: 36 dB(A) at low speed, 46 dB(A) at maximum speed
- Dehumidification: 4.23 pt/h, or about 2 L/h
- Housing dimensions: 38.86 x 7.01 x 15.16 in.
The maximum sound level of 46 dB(A) is the highest in the one-way series, according to the manufacturer's spec sheets. In a bedroom, it would be too much: that's why we don't install this model in a room where people sleep, and we prefer the 9,000 or 12,000 BTU instead, rated at 37 and 41 dB(A) at maximum speed. The 4.23 pt/h dehumidification, for its part, is the strongest in the series, which is useful in a hair salon, an open kitchen or a space with a lot of foot traffic in summer.
Why not an 8-way cassette
In a square space, an 8-way cassette in the centre distributes air better. In a narrow, deep space, it blows a good share of its air against the side walls, and the back of the room stays poorly served. The one-way cassette, installed at one end, puts all its airflow along the useful axis. It's also the only option when the drop ceiling is too low for the thicker housing of a square cassette.
Controls
The infrared remote is included. Wi-Fi is available as an option through a Wi-Fi wired controller compatible with the KINGHOME app, and a wall-mounted or recessed wired controller is available. In commercial spaces, we almost always install a wired controller: it avoids misplaced remotes and keeps the setpoint the same from one shift to the next. The I-feel, self-cleaning, forced defrost, soft start, low-voltage start-up and frost-protection maintenance heating functions are included.
What we check before the installation
A commercial space has its own constraints: the lease, business hours, a drop ceiling shared with other services. Here's what we confirm in Montréal, Laval, Longueuil, on the North Shore and on the South Shore.
Ceiling and structure
We open a few drop-ceiling tiles to locate the structure, the sprinklers and the raceways. The cassette is hung from the structure with threaded rods, never from the grid, with the clearances specified by the manufacturer. We schedule the work to limit how long the business has to close.
Electrical supply
The head is powered through the outdoor unit. The KM36X6O, KM42X6O and KM48X6O require an MCA of 30 A and an MOP of 45 A; the KM60X6O, an MCA of 38 A and an MOP of 40 A. We check the space's panel and, in a mixed-use building, how the load is split between meters.
The outdoor unit
On a flat roof, we set it on a raised base; on a wall, on a bracket that keeps it above the snow. The location takes into account defrost water, access for maintenance and the neighbours' windows.
Piping and drain
The ports on the 36,000 to 48,000 BTU units are 1/4 and 3/8 in., and those on the KM60X6O are 1/4 and 1/2 in. When this head's gas line is larger than the outdoor unit's port, we install the appropriate reducer. The built-in condensate pump lifts the water to a drain that we confirm ahead of time and test at start-up. The vacuum is pulled completely.
LogisVert assistance
This head doesn't appear by itself on Hydro-Québec's LogisVert assistance list; eligibility is confirmed on the installation date. The assistance is tied to the complete multi-zone system and the certified combination: its indicative amount is calculated using the LogisVert rule ($120 per 1,000 BTU/h of certified heating capacity at -8.3 °C, or $50 with the KM60X6O, which has no cold climate designation). The program is aimed at homes: for a commercial space, we check eligibility separately. Only Hydro-Québec confirms the assistance granted.
Why go with AirGreen
- Salaried refrigeration technicians, as comfortable in residential as in light commercial work.
- Civil liability insurance of $5,000,000, often required by building owners.
- Warranty registration taken care of by us.
- After-sales service that knows your space.
Ask for your free estimate: we visit your commercial space or open area, confirm compatibility with the outdoor unit and give you a clear quote for the complete system.
Documentation
Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor, on registered models; additional warranty available.
