GENERAL AIRSTAGE UTY-XWZXZG External Connection Kit for Cassettes and Ducted Units

In stock

The external connect kit GENERAL specifies for its non-wall units: cassettes, ducted units, ceiling units and air handlers.

AirGreen codeAG-AC-085

Non-wall unitscassette, ducted, ceiling
R-32 H-Serieslisted by the manufacturer
Indoor unitsconnects to the board
External connectionGenuine part
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

AirGreen codeAG-AC-085
BrandGENERAL (formerly Fujitsu General)
Part no.UTY-XWZXZG
Manufacturer nameExternal Connect Kit
ForAIRSTAGE non-wall indoor units

Twin of the Fujitsu AIRSTAGE kit, the GENERAL AIRSTAGE UTY-XWZXZG external connection kit is used to connect an external device to the board of an AIRSTAGE non-wall indoor unit: cassette, ducted unit, suspended ceiling unit or air handler. Only the name has changed: Fujitsu General Limited became GENERAL Inc. on January 1, 2026, and the Fujitsu brand is being phased out step by step, while the factories and the numbers stay identical. It is the original part the manufacturer lists for this use, and it files the kit under its “external connect kits for indoor units”. The same part under the Fujitsu AIRSTAGE brand sits next to the GENERAL in our catalogue.

The harness made for cassettes and ducted units

From one type of unit to the next, the manufacturer changes the external connection harness. On a wall-mounted or floor unit, you install the UTY-XWZX or the UTY-XWZXZ5; on a non-wall unit of the R-32 H series, the UTY-XWZXZG is the one that applies. Whether in a commercial space or in a house fitted with a ceiling cassette, its job is to link the unit with an external contact, a timer or a controller.

Units covered

  • ACUH**KUAS (compact) and AUUH**KUAS (circular flow) cassettes
  • ADUH**KUAS (slim) and ARUH**KUAS (medium static pressure) ducted units
  • AMUH**KUAS multi-position air handlers, plus the suspended ceiling unit

With or without the UTY-XCSX board

To go further, these same units accept the UTY-XCSX external input/output board, housed in a box (UTZ-GXEA or UTZ-GXRA) or fastened to a bracket (UTZ-GXNA), depending on the model. Since the available signals vary from one unit to another, we check your unit’s manual before installing anything.

Installed by AirGreen everywhere in Greater Montréal

It is in the unit’s electrical box that our technicians connect the kit, before linking it to your devices, in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. On the compliance side, the company holds RBQ licence 5645-9605-01. A phone call to 514 316-2973 or a message to sales@airgreen.ca lets us confirm availability or prepare your quote.

01 · What it is for

The link between the unit and your external devices

On a cassette or ducted unit, this is the kit the manufacturer lists to connect an external device to the indoor unit’s board.

  • ACUH compact and AUUH circular-flow cassettes
  • ADUH slim duct and ARUH medium static duct units
  • AMUH multi-position air handlers
  • H-Series ceiling-suspended units
The right harnessWall-mount and floor units take the UTY-XWZX or UTY-XWZXZ5; non-wall units take the UTY-XWZXZG.
Genuine partDesigned by the manufacturer for its indoor unit boards.
With the UTY-XCSX boardThe same units accept the UTY-XCSX input/output board for more functions.
Compatible with
ACUH**KUASAUUH**KUASARUH**KUASADUH**KUASAMUH**KUASABUH**KUAS
Per the manufacturer. Send us your unit’s model number and we confirm before ordering.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

BrandGENERAL (formerly Fujitsu General)
Part no.UTY-XWZXZG
TypeExternal connect kit for indoor unit
Listed units (R-32 H-Series)ACUH, AUUH, ADUH, ARUH, AMUH, ceiling-suspended
AirGreen codeAG-AC-085
03 · Before installing

What to know before installing

  • Check the model number: the UTY-XWZXZG is for non-wall units.
  • Available signals and the connection point depend on the unit; its installation manual governs.
  • Wall-mount and floor units do not use this kit: see the UTY-XWZX or UTY-XWZXZ5.
  • The work is done in the unit’s electrical box: have a technician do it.
04 · Goes with

You may also need

Same category
Original parts
See all
05 · Questions

Frequently asked questions

Is my GENERAL or Fujitsu unit compatible?

The manufacturer lists it for its ACUH**KUAS and AUUH**KUAS cassettes, ADUH**KUAS and ARUH**KUAS ducted units, AMUH**KUAS air handlers and its ceiling-suspended unit. Send us your model number and we confirm.

Is it the same as the UTY-XWZXZ5?

No. The UTY-XWZXZ5 is the kit for wall-mount and floor units. The UTY-XWZXZG is for non-wall units.

How is it different from the UTY-XCSX board?

The UTY-XWZXZG is a connection harness. The UTY-XCSX board adds external inputs and outputs to the unit and mounts in a box or bracket specific to each model.

Can you install it?

Yes. Our technicians connect it to the unit and to your external devices, everywhere in Greater Montréal.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

Connect your GENERAL or Fujitsu cassette or ducted unit

Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 7, 2026.