ARCOAIRE FJMA4X Electric Furnace | 4 Tons - 48000 BTU - R410A
Arcoaire’s 4-ton FJMA4X air handler: 1,400 CFM nominal for large forced-air homes.
Model numberFJMA4X48L0CB
514 316-2973 · sales@airgreen.ca
Quick facts
A 4-ton air handler for large forced-air homes
Which homes it suits
Four tons is the size for large spaces: two-storey homes with a finished basement, houses extended over the years, homes where the original system has fallen short since a room was added. In Laval and on the North Shore, we see them regularly. Arcoaire’s FJMA4X48L0CB is the 4-ton (48,000 BTU/h) air handler of the FJMA4X series. Installed in the basement, it pushes a published nominal airflow of 1,400 CFM through the ductwork, working with an outdoor unit of the same capacity.
That airflow is of no use if the ducts cannot keep up. Before proposing this size, we measure the main ducts and the return air; when they are undersized, we say so in the quote rather than let the system whistle at the grilles.
A wider cabinet: what it changes
Arcoaire publishes a cabinet 53-7/16 in high, 21-1/8 in wide and 22-1/16 in deep. If your old unit was narrower, the plenum often has to be adapted with a custom transition. It is not a big job, but it has to be planned in the quote, just like the height available below the joists.
On the electrical side, the air handler runs on 208/230 V single phase, 60 Hz, with a 7.6 A minimum circuit ampacity and 15 A maximum overcurrent protection. The liquid connection is 3/8 in (9.5 mm) inside diameter.
Sold alone: what to know
The FJMA4X48L0CB is sold without an outdoor unit. It therefore does not qualify for the LogisVert grant, which follows the certified outdoor unit + air handler pair. For a full replacement, we choose a 4-ton central heat pump or central air conditioner from the manufacturer’s matches, then check the pair’s eligibility.
No heater kit is described for this model in the data we verified. For electric backup heat, we confirm the compatible kit before placing the order.
AirGreen installation
AirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work. On a 4-ton job, we take care of:
- the free on-site estimate and duct measurements;
- the written quote, outdoor unit included;
- removing the old air handler and fitting a plenum transition if needed;
- refrigerant, electrical and condensate connections, with a vacuum;
- commissioning and airflow adjustment.
We work in Montreal, Longueuil, on the South Shore and throughout Greater Montreal.
A large home, a clear plan
Book your free estimate: we measure the ducts, confirm the 4-ton size and give you a written quote. Financing is available.
The air handler for large homes with ductwork
The FJMA4X48L0CB pushes 1,400 CFM nominal through the ductwork, which makes it the choice for houses whose load calculation reaches 4 tons. It works with an outdoor unit of the same capacity, a central heat pump or a central air conditioner.
- Large two-storey homes with a finished basement
- Extended houses whose current system is no longer enough
- Replacing a worn-out 4-ton air handler
- Completing a 4-ton central heat pump or central air conditioner
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Sold alone: the LogisVert grant follows the certified outdoor unit + air handler pair; the air handler alone does not qualify.
- At 21-1/8 in wide, the cabinet may need a plenum transition if the old unit was narrower.
- Plan for 53-7/16 in of height, plus the plenum and the service clearance the manufacturer requires.
- No heater kit is described for this model in the verified data: we confirm the compatible kit before ordering if you want electric backup heat.
- 208/230 V single-phase, 60 Hz power supply; 3/8 in (9.5 mm) liquid connection, inside diameter.
Manufacturer documents
Explore the range
Electric furnaces – air handlersSee allSame brand
ARCOAIRESee all
Frequently asked questions
My old air handler is narrower: do the ducts need changes?
Sometimes. The FJMA4X48L0CB is 21-1/8 in wide; if the current unit is narrower, we fabricate a matching plenum transition. We see this during the free estimate.
Can my ducts carry 1,400 CFM?
That is the question to ask before buying any 4-ton system. We measure the main ducts and the return air; if they are too small, the quote says so.
Which outdoor unit do I need?
A 4-ton central heat pump or central air conditioner chosen from the matches the manufacturer publishes. The outdoor unit is not included with the air handler.
Is this air handler subsidized?
Not when sold alone. Hydro-Québec’s LogisVert grant follows a certified outdoor unit + air handler pair; we check eligibility when the quote covers the complete system.
A 4-ton Arcoaire air handler, installed by AirGreen
Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 19, 2026.
