Power Cord for Gree 230 V PTAC
The Gree power cord that sets how much electric heat your 230/208 V PTAC may use.
AirGreen codeAG-PT-00301
514 316-2973 · sales@airgreen.ca
Quick facts
The Gree E2CORD power cord connects a Gree R32 PTAC to its 208/230 V wall receptacle. Gree describes it as a universal cord: its amperage corresponds to a specific electric heat output. Changing the cord therefore also sets the heat the unit can use.
Choosing the cord by heat output and circuit
In a hotel, a residence or an apartment, each PTAC has its own dedicated circuit. The cord, the receptacle and the breaker must have the same amperage. Gree points out that codes require leakage current or arc protection on 208/230 V cords: its plug has TEST and RESET buttons to check it.
Three sizes, according to Gree
- E2CORD-230V15A: 15 A, 2.45 kW heat, NEMA 6-15R receptacle.
- E2CORD-230V20A: 20 A, 3.45 kW heat, NEMA 6-20R receptacle.
- E2CORD-230V30A: 30 A, 5 kW heat, NEMA 6-30R receptacle.
Points to check
The wall receptacle, supplied on site, must match the cord’s plug. Gree prohibits the use of an extension cord. Once the unit is installed, run a test with the TEST and RESET buttons on the plug. This cord is the 230/208 V version: Gree offers separate cords for 265 V PTACs. Send us your unit’s model number: we confirm the right cord before ordering.
Installed by AirGreen across Greater Montréal
We install and service Gree PTACs in Montréal, Laval, Longueuil, on the South Shore and on the North Shore, with a master electrician for the receptacle and circuit when needed. RBQ licence 5645-9605-01. To check availability or get a quote, call us at 514 316-2973 or email sales@airgreen.ca with the unit model, the amperage and the quantity.
The cord sets the heat the unit may use
On a Gree PTAC, you pick the cord from the electric heat output you want and the circuit you have.
- New installation of a Gree PTAC on 230/208 V
- Replacing a damaged cord
- Changing circuits: moving from 15 A to 20 A or 30 A, or back
- Hotels, residences and apartments with Gree PTACs
3 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Amperage | Part no. | Wall receptacle | AirGreen code |
|---|---|---|---|
| 15 A (2.45 kW) | E2CORD-230V15A | NEMA 6-15R | AG-PT-00301 |
| 20 A (3.45 kW) | E2CORD-230V20A | NEMA 6-20R | AG-PT-00302 |
| 30 A (5 kW) | E2CORD-230V30A | NEMA 6-30R | AG-PT-00303 |
Cord rating and the electric heat output it allows, per Gree.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- The field-supplied wall receptacle must match the plug: NEMA 6-15R, 6-20R or 6-30R.
- Gree forbids extension cords on its PTACs.
- After installation, test the plug with its TEST and RESET buttons.
- Gree also makes 265 V cords: this is the 230/208 V version.
Manufacturer documents
You may also need
Gree TP-N-631 Wired Wall Thermostat for PTAC
Aluminum Exterior Grille for PTAC
PTAC Drain Kit
Copper Electrical Wire
Breaker for Residential Electrical Panel
LCDI Power Cord for GE Zoneline PTAC (RAK315P, RAK320P)
GE RAK149F2A Wired Wall Thermostat for Zoneline PTACPTAC partsSee all
Frequently asked questions
Which cord should I pick?
Per Gree’s table: 15 A for 2.45 kW of heat, 20 A for 3.45 kW, 30 A for 5 kW. The circuit and receptacle must share the same rating. Send us your PTAC model number and we confirm.
Which receptacle do I need?
A NEMA 6-15R for the 15 A cord, 6-20R for 20 A and 6-30R for 30 A, on 208/230 V.
Does it fit a 265 V PTAC?
No. Gree makes separate 265 V cords. This is the 230/208 V version.
Can you install it?
Yes. We connect the cord, check the receptacle and circuit, then test the unit, everywhere in Greater Montréal.
The right cord for your Gree PTAC
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.