Inverted Steel Wall Bracket
The steel bracket that lets you hang the outdoor unit under a balcony or a roof overhang.
AirGreen codeAG-SP-00302
514 316-2973 · sales@airgreen.ca
Quick facts
The inverted steel wall bracket is used to hang a heat pump's outdoor unit under a balcony or a roof overhang. It is the solution when the ground is already taken, the wall is not suitable, or snow on the ground makes any other location difficult. It is sold individually or as a set of 2.
One more location option for the outdoor unit
In Montréal plexes and row houses, outdoor space is often tight: narrow yard, staircase, parking. Hung under a balcony, the unit frees up the ground and stays partly sheltered from falling snow. It must still keep the clearances required by the unit's manufacturer, above as well as in front.
What to check before installation
- The structure (balcony, beam, overhang) must be able to carry the weight of the outdoor unit.
- In a condominium, the balcony and facade are usually common portions: the condo board's approval is often required.
- Defrost water dripping from the unit must not fall onto a walkway or staircase.
Available formats
The bracket is sold individually or as a set of 2. Anti-vibration pads between the unit and the bracket limit the noise transmitted to the structure.
Installed by AirGreen in Greater Montréal
Our refrigeration technicians assess the location and install the bracket and outdoor unit when installing your heat pump in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the format and quantity.
When the unit can go neither on the ground nor on the wall
Under a balcony or a roof overhang, the inverted bracket hangs the outdoor unit from the structure.
- Outdoor units placed under an upper-floor balcony
- Spots under a roof overhang or a projection
- Narrow yards where the ground and wall are already taken
- Units that must stay away from snow on the ground
2 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
Single bracket, or a set of 2.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- The structure holding the bracket must be able to carry the outdoor unit’s weight.
- In a condominium, the syndicate’s approval is often required to hang equipment under a balcony.
- Keep the clearances the equipment maker asks for, especially above and in front of the unit.
- Add anti-vibration pads to limit noise carried into the structure.
You may also need
Wall Bracket for Heat Pump Outdoor Unit
Rubber Anti-Vibration Pads – Box of 48
Protective Roof for Heat Pump Outdoor Unit
Heavy-Duty Wall Bracket for Heat Pump (115 or 200 lb)
Copper Pipe Clamp
Plastic End Caps for Wall Bracket – Box of 50
Protective Roof Extension for Two-Fan Units
3 in Thick Condenser PadBrackets and protectionSee all
Frequently asked questions
When should I use an inverted bracket?
When the outdoor unit has to hang from a structure above it, under a balcony or a roof overhang, because the ground or the wall will not work.
Is my balcony structure strong enough?
That has to be checked on site before mounting. Our technicians assess the location and the unit’s weight and suggest another spot if needed.
Do I need the condo syndicate’s approval?
Often, yes, since the balcony and the facade are usually common areas. Check your declaration of co-ownership before the work.
Can you install it?
Yes. Our technicians mount the bracket and the outdoor unit when they install your heat pump, everywhere in Greater Montréal.
A solution for difficult locations
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.