Eco-Touch Wall Control for Air Exchanger (4-Wire)
Fantech’s Eco-Touch wall control, wired with 4 conductors, to run your air exchanger from a room in the house.
AirGreen codeAG-VF-003
514 316-2973 · sales@airgreen.ca
Quick facts
The Eco-Touch wall control from Fantech operates a compatible air exchanger from a wall in the house. This version connects to the unit with a 4-wire cable. It is used to replace a broken or outdated control, or to put the main control in the living area rather than in the basement next to the unit.
Ventilation settings within reach
An air exchanger (HRV or ERV) works better when the ventilation is easy to adjust: more fresh air when the house is full, less when it is empty, a switch to high speed after a shower or cooking. Mounted in the hallway or living room, the wall control makes these adjustments simple, without going down to the basement.
Before you order
- Check your exchanger’s model number: Fantech controls are designed for specific units.
- Plan a 4-conductor cable between the exchanger and the control; an existing cable can often be used.
- Choose a central area, away from a heating register, a window or the bathroom.
Wiring
Cut the power to the exchanger before wiring the control and follow the wiring diagram supplied by Fantech with the unit. If your exchanger is not a Fantech, send us its details: we will point you to the control specified by its manufacturer.
Installed by AirGreen across Greater Montréal
Our technicians install wall controls and service air exchangers in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with your air exchanger model.
Run your ventilation without going to the basement
Mounted in the hallway or living room, the wall control puts the air exchanger settings within reach.
- Replacing a broken or outdated wall control
- Adding a main control in the living area
- New air exchanger installation
- Renovations where the control wire is already in place
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Check that your air exchanger accepts this control: send us its model number.
- A 4-conductor cable must run from the control to the unit.
- Shut off power to the air exchanger before any wiring.
- Mount it in a central area, away from direct heat or humidity.
You may also need
Eco-Touch Auto IAQ Wall Control for Air Exchanger
Wall Timer for Air Exchanger
Mechanical Dial Dehumidistat for Air Exchangers
MERV 13 Filter Box – 6 in
120 V Fan Speed Control
Electronic Display Control for Air Exchanger
Multi-Function Electronic Control for Air Exchanger
Eco-Feel Auto IAQ Wall Control for Air ExchangerFans and controlsSee all
Frequently asked questions
Does the Eco-Touch control work with my air exchanger?
Fantech wall controls are designed for specific air exchangers. Send us the brand and model number of your unit (on the nameplate) and we confirm compatibility before ordering.
What does “4-wire” mean?
The control connects to the unit with a 4-conductor cable. If an old control already uses that type of cable, it can often be reused; we check on site.
Where should it go?
In a central area of the home, at the height of other wall controls, away from a heating outlet, a window or the bathroom.
Can you install it?
Yes. Our technicians install controls and service air exchangers everywhere in Greater Montréal.
An Eco-Touch control installed by AirGreen
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.