GENERAL AIRSTAGE UTY-TWRXZ4 Communication Kit for Orion XLTH+ Wall Unit

In stock

The communication kit for the Orion XLTH+, the top-tier AIRSTAGE wall unit (GENERAL or Fujitsu), required for any wired control.

AirGreen codeAG-AC-088

Orion XLTH+top-tier AIRSTAGE wall unit
2 wireswired controller line
Requiredfor wired controls
Orion XLTH+Genuine part
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

AirGreen codeAG-AC-088
BrandGENERAL (formerly Fujitsu General)
Part no.UTY-TWRXZ4
Manufacturer nameCommunication Kit – Wall Mount
ForOrion XLTH+ wall units (ASUH**KTAS, ASUH**KTAB)

The GENERAL AIRSTAGE UTY-TWRXZ4 is the genuine communication kit that makes it possible to connect a wired remote control to the Orion XLTH+ wall-mount heat pump, the top of the line in the AIRSTAGE family. Without it, neither the KAGAMI controller nor the wired remote controls can be connected to the unit. The name change dates from January 1, 2026: on that day, Fujitsu General Limited became GENERAL Inc. following its acquisition by Paloma Rheem Holdings, and the factories as well as the AIRSTAGE products stayed the same. This GENERAL kit is therefore identical to the Fujitsu AIRSTAGE version.

A version reserved for the Orion XLTH+

For the Orion XLTH+, the manufacturer designed a separate variant of the communication kit. On the system’s spec sheet, the note “Requires Communication kit UTY-TWRXZ4 to connect this device to IDU” accompanies each of the following devices.

  • The UTY-RNRUZ5 wired remote control and the KAGAMI UTY-RVRU wired controller
  • The UTY-RHRY and UTY-RSRY simple remote controls
  • On the integration side, the UTY-VTGX network converter and the UTY-TERX external switch controller
  • The UTY-TTRXZ1 interface for a 24 V thermostat

The models concerned

The Orion XLTH+ comes in 9,000, 12,000 and 15,000 BTU, in white (ASUH**KTAS) as well as in black (ASUH**KTAB). The spec sheet we consulted covers the 15,000 BTU system, so we confirm your model before any order. For Altair 500, Altair 700 and Orion XLTH wall units, the UTY-TWRXZ2 is the one you need instead. Note that on the Orion XLTH+, the external input and output board is also model-specific: the UTY-XCSXZ3.

AirGreen installs the kit throughout Greater Montreal

A single visit is enough to install the kit and your wired control in Montreal, Laval, Longueuil, on the North Shore or on the South Shore. Our RBQ licence number is 5645-9605-01, and we are an authorized GENERAL and Fujitsu AIRSTAGE dealer. For availability or a quote, contact us at 514 316-2973 or at sales@airgreen.ca, specifying your Orion XLTH+ model.

01 · What it is for

A wired control on the Orion XLTH+

The Orion XLTH+ submittal requires the UTY-TWRXZ4 to connect these devices to the indoor unit:

  • UTY-RVRU KAGAMI wired controller
  • UTY-RNRUZ5 wired remote controller
  • UTY-RSRY and UTY-RHRY simple remotes
  • UTY-VTGX network converter, UTY-TERX controller, UTY-TTRXZ1 thermostat interface
Made for the Orion XLTH+AIRSTAGE Altair 500, Altair 700 and Orion XLTH wall units (GENERAL or Fujitsu) take the UTY-TWRXZ2; the Orion XLTH+ takes the UTY-TWRXZ4.
Required by the manufacturerSubmittal note: “Requires Communication kit UTY-TWRXZ4 to connect this device to IDU”.
White or blackIt serves both the white (ASUH**KTAS) and black (ASUH**KTAB) versions.
Compatible with
ASUH**KTASASUH**KTAB
Per the manufacturer. Send us your unit’s model number and we confirm before ordering.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

BrandGENERAL (formerly Fujitsu General)
Part no.UTY-TWRXZ4
TypeCommunication kit for wall-mount unit
FunctionConnects a wired control to the indoor unit
Listed unitsOrion XLTH+ (15KTAP1 system submittal)
AirGreen codeAG-AC-088
03 · Before installing

What to know before installing

  • Check that your wall unit is an Orion XLTH+ (ASUH…KT…): we confirm the model before ordering.
  • An Altair 500, Altair 700 or Orion XLTH needs the UTY-TWRXZ2.
  • On the Orion XLTH+, the external input/output board is the UTY-XCSXZ3.
  • The kit installs inside the indoor unit: have a technician do it.
04 · Goes with

You may also need

Same category
Original parts
See all
05 · Questions

Frequently asked questions

Is my unit compatible?

The manufacturer lists the UTY-TWRXZ4 in the submittal of the Orion XLTH+ 15KTAP1 system. Send us your indoor unit’s model number and we confirm before ordering.

Why not the UTY-TWRXZ2?

The manufacturer pairs the UTY-TWRXZ2 with Altair and Orion XLTH wall units. For the Orion XLTH+, the submittal requires the UTY-TWRXZ4.

Which devices require this kit?

The UTY-RVRU, UTY-RNRUZ5, UTY-RSRY and UTY-RHRY wired controls, the UTY-VTGX converter, the UTY-TERX controller and the UTY-TTRXZ1 interface.

Can you install it?

Yes. Our technicians fit the kit and the wired control in one visit, everywhere in Greater Montréal.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

A wired control for your Orion XLTH+

Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 7, 2026.