GENERAL AIRSTAGE KAGAMI Wired Controller – UTY-RVRU
The premium GENERAL AIRSTAGE wall controller: a 4-inch colour touch screen, one operation per screen and mode lights.
AirGreen codeAG-AC-067
514 316-2973 · sales@airgreen.ca
Quick facts
The top-of-the-range model in the AIRSTAGE family, the GENERAL AIRSTAGE KAGAMI UTY-RVRU wired controller mounts on the wall. Whether it bears the GENERAL logo or the Fujitsu AIRSTAGE one, it keeps the same model number: it is the same part. It is made, in the same factories as before, by GENERAL Inc., the name Fujitsu General Limited has carried since January 1, 2026. Room temperature, mode, set point, fan speed, timer: it all shows on its 4 in colour touchscreen. Just two wires connect it to the indoor unit, which also supplies its power.
An interface you understand right away
The principle the manufacturer chose fits in a few words: one operation per screen. To change a value, you slide a finger up or down; to move on to the next setting, you slide it sideways. The light changes colour with the mode: blue to cool, red to heat, green to dehumidify, purple in auto mode. In group control, a single KAGAMI can manage up to 16 indoor units.
The spec sheet at a glance
- TFT display at 480 × 480 pixels, protected against fingerprints
- Connection by 2-conductor cable, 16 to 22 AWG; the indoor unit provides the 12 V DC
- Set point range: 16 to 30 °C in heating, 18 to 30 °C in cooling
- Weighs 225 g for 121.5 × 116 × 26 mm and operates between 0 and 40 °C
Useful to business owners and installers alike
A hotel can have its logo appear on it and block access to certain settings, and the contractor can leave contact details on it. Commissioning goes through the AIRSTAGE Remo Set app, over Bluetooth; for troubleshooting, the technician has a refrigeration cycle monitor. The manufacturer calls for the UTY-TWRXZ2 communication kit to be added when the controller runs a wall-mounted heat pump or a floor unit.
A KAGAMI wired and set up by AirGreen
Our technicians pull the cable, mount the controller on the wall and configure it with your GENERAL or Fujitsu AIRSTAGE system, everywhere in Montreal, Laval and Longueuil as well as on the North Shore and the South Shore, under RBQ licence 5645-9605-01. Just give us your indoor unit model, at 514 316-2973 or sales@airgreen.ca, to find out whether the KAGAMI is available and receive a quote.
A controller you will want on your wall
KAGAMI replaces the handheld remote with a wall-mounted touch screen, linked to the indoor unit by two wires.
- AIRSTAGE (GENERAL or Fujitsu) ducted units, air handlers and cassettes with no remote supplied
- Wall-mount and floor units, with the UTY-TWRXZ2 communication kit
- Group control of up to 16 indoor units
- Hotels and shops: custom logo and hidden settings
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Check that your indoor unit is on the UTY-RVRU compatibility list.
- On wall-mount and floor units, the manufacturer calls for the UTY-TWRXZ2 communication kit.
- 2-conductor cable, 16 to 22 AWG, stranded, unshielded.
- Mount it away from direct sun and heat sources.
- The manufacturer shows KAGAMI in several finishes: confirm the finish you want with us.
Manufacturer documents
You may also need
GENERAL AIRSTAGE UTY-TWRXZ2 Communication Kit for Wall Unit
GENERAL AIRSTAGE Remote Temperature Sensor – UTY-XSZXZ1
GENERAL AIRSTAGE Wired Remote Control with Leak Alerts – UTY-RNRUZ6
GENERAL AIRSTAGE UTY-TFSXJ4 Wi-Fi Module for Non-Wall-Mounted Unit (UART)
Fujitsu Leak Detection System Accessory – UTYSGZU
GENERAL AIRSTAGE Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)Original partsSee all
Frequently asked questions
Is my GENERAL or Fujitsu AIRSTAGE unit compatible?
The manufacturer lists it for its AIRSTAGE ducted units, air handlers, cassettes and ceiling-suspended units, and for several wall-mount series. Send us your indoor unit model number and we confirm, including whether the UTY-TWRXZ2 kit is needed.
How is it different from the UTY-RNRUZ remote?
Both are wired and control up to 16 units. KAGAMI has a 4-inch colour screen, swipe navigation, mode lights and Bluetooth setup.
Does it need its own power supply?
No. It is powered at 12 V DC by the indoor unit through the same 2-wire cable.
Can you install it?
Yes. We run the cable, mount the controller and set it up, everywhere in Greater Montréal.
KAGAMI for your GENERAL or Fujitsu AIRSTAGE system
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.
