GENERAL AIRSTAGE FJ-IR-WIFI-1NA Infrared Wi-Fi Module (Intesis Home)
The infrared Wi-Fi module GENERAL offers to run an AIRSTAGE heat pump from a phone, with nothing plugged into the indoor unit.
AirGreen codeAG-AC-081
514 316-2973 · sales@airgreen.ca
Quick facts
The GENERAL AIRSTAGE FJ-IR-WIFI-1NA infrared Wi-Fi module and its Fujitsu AIRSTAGE equivalent are one and the same. GENERAL Inc. is the name Fujitsu General Limited has carried since January 1, 2026, following its acquisition by Paloma Rheem Holdings; the manufacturer and its factories are the same as before. The module is used to run an AIRSTAGE heat pump, GENERAL or Fujitsu, from a phone, tablet or computer with the Intesis Home app. Fastened to the wall within range of the indoor unit, it sends your commands to it by infrared, the same way its remote does, and nothing plugs into the unit. You can also view the same part under the Fujitsu AIRSTAGE brand, sold alongside the GENERAL version.
Managing the heat pump without being there
Start the unit before you arrive, make sure it is no longer running after you leave, keep an eye on the room temperature and get notified as soon as an alarm goes off. To set up a schedule, the calendar built into the app does the job. Each indoor unit needs its own module, and the app can bring together up to 50 of them.
Manufacturer spec sheet
- White housing of 81 × 78 × 28 mm, 76 g
- Powered at 5 V DC, 0.2 A, through a power adapter
- Operating range: 0 to 40 °C
- Manufacturer warranty of 2 years from installation
To check before mounting
Because the service is cloud-based, the Internet connection has to stay active at all times. Measure the Wi-Fi signal strength at the planned spot and keep the path between the module and the unit clear, since curtains, furniture, glass and metal surfaces can disrupt infrared. A non-wall unit, such as a cassette or a ducted unit, must be fitted with an IR receiver installed on the unit. Without a receiver, the wired FJ-AC-WIFI-1 module is often the better choice.
Mounting and pairing by AirGreen in Greater Montréal
Our technicians mount the module, connect it to your network and pair it with the heat pump in Montréal, Laval, Longueuil, on the South Shore and on the North Shore; AirGreen holds RBQ licence 5645-9605-01. Before you call us at 514 316-2973 or write to sales@airgreen.ca about availability or a quote, note your indoor unit’s model number: it is the first thing we will ask for.
Your GENERAL or Fujitsu heat pump, controlled from anywhere
The module joins your Wi-Fi and sends commands to the indoor unit by infrared, just like its remote control.
- Turn the heat pump on before you get home
- Check whether the unit was left running, then shut it off
- Monitor room temperature and receive alarm notices
- Set a calendar schedule in the app
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- It is a cloud service: an Internet connection is needed at all times.
- Check Wi-Fi signal strength where the module will be mounted.
- Furniture, curtains, glass and metal surfaces can interfere with infrared communication.
- On a non-wall unit, an IR receiver must be installed to receive the module’s commands.
- Operating temperature: 0 to 40 °C.
- Wi-Fi module
- Power supply with 4 interchangeable plugs
- Rubber dampers
- Quick installation guide
- Additional cable
Manufacturer documents
You may also need
GENERAL AIRSTAGE FJ-AC-WIFI-1 Wired Wi-Fi Module (Intesis)
GENERAL AIRSTAGE IR Receiver Kit with Wireless Remote Control (Ducted and Air Handler) – UTY-LBTUM
GENERAL AIRSTAGE IR Receiver Kit with Wireless Remote (Circular-Flow Cassette) – UTY-LBTUC
GENERAL AIRSTAGE UTY-TFSXH4 Wi-Fi Module for Wall-Mounted Unit (USB)
GENERAL AIRSTAGE UTY-TFSXJ4 Wi-Fi Module for Non-Wall-Mounted Unit (UART)
Fujitsu Leak Detection System Accessory – UTYSGZU
GENERAL AIRSTAGE Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01Original partsSee all
Frequently asked questions
Is my GENERAL or Fujitsu unit compatible?
The manufacturer lists this module among the accessories of its R-32 AIRSTAGE H-Series heat pumps: wall-mount, cassette, ducted, floor and air handler units. Send us your indoor unit’s model number and we confirm before ordering.
Does it need Internet?
Yes. Intesis Home is a cloud service: the module and your phone both need Internet access.
How is it different from the wired FJ-AC-WIFI-1?
The FJ-IR-WIFI-1NA sends commands by infrared and mounts on the wall without opening the unit. The FJ-AC-WIFI-1 is wired to the unit, so line of sight is not a concern.
Can you install it?
Yes. Our technicians mount the module, connect it to your Wi-Fi and pair it with the unit, everywhere in Greater Montréal.
Add Wi-Fi to your GENERAL or Fujitsu heat pump
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.
