Plastic Foot Pads for Ground Stand (3 × 3 in)
The plastic foot that slips under each leg of a ground stand to protect the surface below.
AirGreen codeAG-SP-00701
514 316-2973 · sales@airgreen.ca
Quick facts
The 3 × 3 in plastic foot pad goes under each foot of an outdoor unit ground stand. It spreads the unit’s weight over a wider area and protects what is underneath: flat roof membrane, pavers, deck or slab. It is available individually or in a box of 40.
Protecting the roof and pavers under the outdoor unit
The foot of a metal stand concentrates the unit’s entire weight on a few square centimetres. With compressor vibration and freeze-thaw cycles, it eventually marks pavers or wears through a roof membrane. A plastic foot pad under each foot prevents that direct contact and helps the stand stay stable.
Where to use it
- Under a ground stand set on a flat roof
- On pavers, a deck or a concrete slab
- Under the stands of wall-mounted and central heat pump outdoor units
How many you need
Count one foot pad per stand foot. A single pad is handy for replacing a damaged one; the box of 40 covers several installations. On a flat roof, have the roofer confirm that the membrane can take the unit before installation.
Supplied and installed by AirGreen across Greater Montréal
Our refrigeration technicians install the foot pads with the stand and the outdoor unit on every heat pump installation in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the format and quantity.
Between the stand leg and the surface
A ground stand’s legs put the unit’s weight on a small area: the foot spreads it out.
- Ground stands set on a flat-roof membrane
- Stands set on pavers, a deck or a slab
- Stands for wall-mount and central heat pump units
- Replacing damaged feet
2 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
Single, or a box of 40 feet.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Plan one foot under each leg of the stand.
- The surface must be clean, stable and level.
- On a flat roof, check with the roofer that the membrane can take the equipment.
- The box of 40 covers several stands.
You may also need
Adjustable Ground Stand for Outdoor Unit
Ground Stand for Central Heat Pump
Rubber Anti-Vibration Pads – Box of 48
Copper Pipe Clamp
Plastic End Caps for Wall Bracket – Box of 50
Protective Roof Extension for Two-Fan Units
3 in Thick Condenser Pad
Red Flashing – 10 ft RollBrackets and protectionSee all
Frequently asked questions
How many do I need?
One under each stand leg: count the legs on your stands.
Is it useful on a concrete slab?
Less than on a membrane or pavers, but it still keeps the leg from marking the surface and helps the stand stay steady.
Can a ground stand go on a flat roof?
Yes, on a surface meant for the equipment, with feet under the legs. The roofer must confirm the membrane allows it.
Can you install it?
Yes. Our technicians fit the feet with the stand and the outdoor unit during the installation, everywhere in Greater Montréal.
A ground stand that spares the surface
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.