3 Products
HVAC supplies — Montréal
Refrigerant Piping
This collection holds the copper that connects a heat pump’s indoor unit to its outdoor unit: soft A.C.R. tubing you insulate on site, line sets that come already insulated, and pre-insulated tube sold one line at a time, for wall-mounted, multi-zone and central heat pumps.
Three ways to run a line
- Soft A.C.R. copper tubing: 50 ft coil in ten outside diameters from 1/8 in to 1-1/8 in, bent on site.
- Pre-insulated line set: liquid and gas lines already insulated, 50 ft coil, in 1/4 × 3/8, 1/4 × 1/2, 1/4 × 5/8 and 3/8 × 3/4 in, connected with flare fittings.
- Pre-insulated copper tube: a single tube under 1/2 in insulation, from 1/4 in to 7/8 in, in 50 ft coils or, up to 1/2 in, 164 ft coils.
Choosing the right diameter
A.C.R. tubing is named by its actual outside diameter: a 5/8 in tube fits a 5/8 in fitting and matches a 5/8 in port on the unit. The sizes to use are in the unit’s installation manual; on a line set, the first number is the liquid line. If your pair of sizes is not offered as a set, for example a 7/8 in suction line, take two coils of pre-insulated tube. On that tube, the 1/2 in in the title is the insulation thickness, not the copper size.
Lines installed by our technicians
We run, connect and insulate the lines of every heat pump we install in Montréal, Laval, Longueuil, the South Shore and the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the product, the diameter and the number of coils.