Élios Heating Element for GPHLA Extra-Slim Fan Coil
The original long, slim heater kit built for the Élios GPHLA slim ceiling fan coil.
AirGreen codeAG-AC-01101
514 316-2973 · sales@airgreen.ca
Quick facts
The Élios EAHxxDUL series heating element is made for the GPHLA extra-slim fan coil, the thin ducted unit that hides in a drop ceiling or an attic. It adds electric auxiliary heat of 3, 5, 8 or 10 kW nominal, at 208-230 V single-phase, and keeps the unit's slim profile: 28.74 × 3.9 × 7.48 in and 1.8 kg.
Auxiliary heat where there is no room for an air handler
In a condo, a renovation or a floor with no mechanical room, the GPHLA distributes air through short ducts from the ceiling. The DUL element supplements the heat pump when it needs extra heat. Élios lists it as an optional accessory in the submittal sheets for the GPHLA18, GPHLA24, GPHLA30 and GPHLA36.
Sizes listed by Élios
- 5, 8 and 10 kW: for all four sizes, from 18,000 to 36,000 BTU.
- 3 kW: for the GPHLA18, GPHLA30 and GPHLA36; it does not appear in the GPHLA24 sheet.
Built-in relay, protection at the panel
The manufacturer's drawing shows a relay on each DUL element, with no breaker. Circuit protection is therefore provided at the panel, based on the maximum value (MOCP) in the sheet: 20 A for the 3 kW up to 50 A for the 10 kW, at 230 V. Actual output also varies with voltage; the 10 kW delivers 9 kW at 230 V and 7.4 kW at 208 V. The values for each size are shown when you select it.
Installed by AirGreen in Greater Montréal
We install the element in your GPHLA and check the auxiliary heat in Montréal, Laval, Longueuil, on the South Shore and the North Shore; the power circuit is done by a master electrician. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the unit model, the output and the quantity.
Backup heat in a ceiling-mounted unit
The GPHLA hides in a dropped ceiling or an attic; the DUL kit has the slim shape that fits inside.
- Backup heat for an Élios system with a GPHLA slim fan coil
- Unit installed in a dropped ceiling, a soffit or an attic
- Renovations with no room for an upright air handler
- Replacing a DUL-series heater
4 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Model | Actual output at 208 / 230 V | Current at 208 / 230 V | MCA at 208 / 230 V | Max. overcurrent protection (MOCP) at 208 / 230 V | Net weight | Compatible air handlers | Part no. | AirGreen code |
|---|---|---|---|---|---|---|---|---|
| 3 kW – EAH03DUL | 2.26 / 2.75 kW | 11 / 12.5 A | 14 / 16 A | 15 / 20 A | 1.8 kg (4 lb) | GPHLA18, GPHLA30 and GPHLA36 | EAH03DUL | AG-AC-01101 |
| 5 kW – EAH05DUL | 3.76 / 4.54 kW | 18.5 / 20 A | 23.5 / 25 A | 25 / 30 A | 1.8 kg (4 lb) | GPHLA18, GPHLA24, GPHLA30 and GPHLA36 | EAH05DUL | AG-AC-01102 |
| 8 kW – EAH08DUL | 5.9 / 7.1 kW | 29 / 31.5 A | 36.5 / 40 A | 40 / 45 A | 1.8 kg (4 lb) | GPHLA18, GPHLA24, GPHLA30 and GPHLA36 | EAH08DUL | AG-AC-01103 |
| 10 kW – EAH10DUL | 7.4 / 9 kW | 36.5 / 40 A | 46 / 50 A | 50 / 50 A | 1.8 kg (4 lb) | GPHLA18, GPHLA24, GPHLA30 and GPHLA36 | EAH10DUL | AG-AC-01104 |
Nominal output. Actual values at 208 V and 230 V are in the table for the size you pick.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- The 3 kW kit is not listed on the GPHLA24 submittal: use 5, 8 or 10 kW for that size.
- No breaker appears on the DUL drawing: plan circuit protection at the panel, per the MOCP on the sheet.
- The 10 kW kit needs 50 A MCA and 50 A max. overcurrent protection at 230 V.
- The supply circuit is done by a licensed electrician, with the unit powered off.
Manufacturer documents
You may also need
Élios Programmable Wired Controller – KJRSAALN1
Élios Programmable Wi-Fi Wired Controller – KJRSAALW1
Élios COMM 24 V Smart Thermostat – ST1S42RW1
Copper Electrical Wire
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)
Hitachi Port Adapter for airHome RAM-G Multi-ZoneOriginal partsSee all
Frequently asked questions
Which kit fits my GPHLA?
The Élios submittals list the 5, 8 and 10 kW kits for all four sizes, 18,000 to 36,000 BTU, and the 3 kW kit for the GPHLA18, GPHLA30 and GPHLA36. Send us your unit’s model number and we confirm before ordering.
Is it the same kit as for the GGHLA wall-mount air handler?
No. The GGHLA takes the EAHxxCUL series. The DUL series is longer and thinner, made for the GPHLA.
Does the kit have its own breaker?
The manufacturer’s DUL drawing shows only a relay. The circuit is protected at the electrical panel, per the max. overcurrent protection listed for each rating.
Can you install it?
Yes. We fit the kit in the GPHLA and check the backup heat; the supply circuit is run by a licensed electrician, everywhere in Greater Montréal.
Original backup heat for your GPHLA
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.