Dettson EHIA Electric Heater Kit for Duotec Air Handler
Electric backup heat for Dettson Duotec air handlers, in single-phase kits from 10 to 25 kW.
AirGreen codeAG-AC-14002
514 316-2973 · sales@airgreen.ca
Quick facts
EHIA electric heater kits are field installed in Dettson Duotec series air handlers. They provide backup heat for a central heat pump by warming the duct air. The Duotec specifications list single-phase kits from 5 to 25 kW; this page groups the 10, 15, 20 and 25 kW models.
Actual output depends on voltage
The kit’s documentation gives its actual output at 240 V and at 208 V. The EHIA10KN10, for example, delivers 9.6 kW at 240 V and 7.2 kW at 208 V. The 10 kW model connects to a terminal block, with no breaker; the 15, 20 and 25 kW models have built-in circuit breakers.
One or several circuits
- EHIA10KN10: one circuit
- EHIA15KB10 and EHIA20KB10: one circuit or two
- EHIA25KB10: one circuit or three
Before ordering
Dettson’s Duotec specifications exclude some output and airflow combinations: we check your air handler size before choosing the kit. Have your electrical service checked before choosing a high output.
Installed by AirGreen in Greater Montréal
We install the kit in your Dettson air handler and set up the backup heat with the heat pump in Montréal, Laval, Longueuil, on the South Shore and on the North Shore; the supply circuit is done by a licensed electrician. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the air handler model, the output and the quantity.
Backup heat for the Duotec air handler
Field installed in the air handler, the kit warms the duct air when the heat pump needs extra heat.
- Backup heat for a central heat pump with a Dettson Duotec air handler
- Homes heated electrically through ductwork
- Adding backup heat to an existing Duotec air handler
- Replacing an EHIA kit
4 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Model | Output at 240 / 208 V | Output at 240 / 208 V (BTU/h) | Heater current at 240 / 208 V | Circuits | Protection | Power supply | Part no. | AirGreen code |
|---|---|---|---|---|---|---|---|---|
| 10 kW – EHIA10KN10 | 9.6 / 7.2 kW | 32,756 / 24,567 | 40.0 / 34.6 A | 1 | Terminal block, no breaker | Single phase | EHIA10KN10 | AG-AC-14001 |
| 15 kW – EHIA15KB10 | 14.4 / 10.8 kW | 49,134 / 36,851 | 60.0 / 51.9 A | 1 or 2 | Circuit breakers | Single phase | EHIA15KB10 | AG-AC-14002 |
| 20 kW – EHIA20KB10 | 19.2 / 14.4 kW | 65,513 / 49,134 | 80.0 / 69.2 A | 1 or 2 | Circuit breakers | Single phase | EHIA20KB10 | AG-AC-14003 |
| 25 kW – EHIA25KB10 | 24 / 18 kW | 81,891 / 61,418 | 100.0 / 86.5 A | 1 or 3 | Circuit breakers | Single phase | EHIA25KB10 | AG-AC-14004 |
Nominal output in the name; actual output at 240 V and 208 V is in the table for the model you pick.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Dettson excludes some output and airflow combinations in the Duotec specifications: we check your air handler size before ordering.
- Actual output depends on voltage: the EHIA10KN10 delivers 9.6 kW at 240 V and 7.2 kW at 208 V.
- The kits are single phase.
- The supply circuit is done by a licensed electrician, with the unit powered off.
Manufacturer documents
You may also need
Copper Electrical Wire
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)
Hitachi Port Adapter for airHome RAM-G Multi-Zone
Hitachi PSC-6RAD H-Link Adapter for airHome Indoor Unit
Hitachi SPX-RAMHLK H-Link Adapter for airHome Multi-Zone Outdoor Unit
Hitachi 5-Wire Thermostat, Wi-Fi and BACnet/Modbus Adapter – C4STAT01Original partsSee all
Frequently asked questions
Which kit fits my Duotec air handler?
Dettson’s Duotec specifications list EHIA kits from 5 to 25 kW and exclude some output and airflow combinations. Send us your air handler model number and we confirm before ordering.
Why 9.6 kW and not 10 kW?
The kit’s documentation gives its actual output: 9.6 kW at 240 V and 7.2 kW at 208 V for the EHIA10KN10, whose nominal output is 10 kW.
How many circuits do I need?
One for the 10 kW, one or two for the 15 and 20 kW, one or three for the 25 kW.
Can you install it?
Yes. We fit the kit in the air handler and set up the backup heat with the heat pump; the supply circuit is run by a licensed electrician, everywhere in Greater Montréal.
Backup heat for your Dettson Duotec air handler
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 19, 2026.