Fujitsu Electric Heat Kit for AMUH12-24 Air Handler
The genuine electric heater that fits inside the Fujitsu AMUH multi-position air handler and takes over in deep cold.
AirGreen codeAG-AC-00102
514 316-2973 · sales@airgreen.ca
Quick facts
The Fujitsu UTZ-EU electric heat kit fits inside the cabinet of the AMUH multi-position air handler of a Fujitsu AIRSTAGE central heat pump. It warms the air already passing through the air handler and takes over from the heat pump during defrost cycles or in extreme cold. This page groups the six kits designed for the small cabinet: AMUH12KUAS, AMUH18KUAS and AMUH24KUAS.
Backup heat chosen to match the air handler
Fujitsu does not offer a universal kit: its submittal sheet lists, for each air handler, the outputs that suit it. All are powered at 208/240 V. Models ending in MSA heat in one stage, those ending in MSB2 in two stages, so the second stage only comes on when demand rises.
The kits and their air handlers
- AMUH12KUAS: UTZ-EU02MSA (2 kW, 1 stage) or UTZ-EU04MSB2 (4 kW, 2 stages)
- AMUH18KUAS: UTZ-EU03MSA (3 kW, 1 stage) or UTZ-EU06MSB2 (6 kW, 2 stages)
- AMUH24KUAS: UTZ-EU02MSA (2 kW), UTZ-EU04MSA (4 kW, 1 stage) or UTZ-EU08MSB2 (8 kW, 2 stages)
Before ordering
Note the full model number on the air handler’s nameplate. The choice of output also depends on the building’s heating load and the capacity of your electrical service: the circuit must be sized according to the nameplate and the Québec Construction Code. The AMUH30 to AMUH48 air handlers use another series of kits (medium cabinet), offered on a separate page.
Installed by AirGreen across Greater Montréal
We install the kit in the air handler and make the connections, with power off and following Fujitsu’s instructions, in Montréal, Laval, Longueuil, the South Shore and the North Shore. RBQ licence 5645-9605-01. To check availability or get a quote, call us at 514 316-2973 or email sales@airgreen.ca with the air handler model, the output you need and the quantity.
Backup heat built into the air handler
The kit installs in the AMUH cabinet and heats the air already moving through your ducts.
- Backup heat for a Fujitsu central heat pump with an AMUH air handler
- Heat during defrost cycles and extreme cold
- Replacing an original kit on an existing AMUH air handler
- New builds where the air handler serves a whole home through ductwork
6 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Model | Capacity | Heating stages | Power supply | Air handlers listed by Fujitsu | Part no. | AirGreen code |
|---|---|---|---|---|---|---|
| 2 kW, 1 stage – UTZ-EU02MSA | 2 kW | 1 | 208/240 V | AMUH12KUAS, AMUH24KUAS | UTZ-EU02MSA | AG-AC-00101 |
| 3 kW, 1 stage – UTZ-EU03MSA | 3 kW | 1 | 208/240 V | AMUH18KUAS | UTZ-EU03MSA | AG-AC-00102 |
| 4 kW, 1 stage – UTZ-EU04MSA | 4 kW | 1 | 208/240 V | AMUH24KUAS | UTZ-EU04MSA | AG-AC-00103 |
| 4 kW, 2 stages – UTZ-EU04MSB2 | 4 kW | 2 | 208/240 V | AMUH12KUAS | UTZ-EU04MSB2 | AG-AC-00104 |
| 6 kW, 2 stages – UTZ-EU06MSB2 | 6 kW | 2 | 208/240 V | AMUH18KUAS | UTZ-EU06MSB2 | AG-AC-00105 |
| 8 kW, 2 stages – UTZ-EU08MSB2 | 8 kW | 2 | 208/240 V | AMUH24KUAS | UTZ-EU08MSB2 | AG-AC-00106 |
Fujitsu lists each kit for specific air handlers: check the “Air handlers listed by Fujitsu” row of the model you pick.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Read the full air handler model number on its nameplate before choosing the capacity.
- Fujitsu lists the compatible kits for each air handler on its submittal sheet.
- The electrical circuit must be sized from the nameplate and the Québec electrical code.
- Wiring is done with the power off, by a licensed electrician or refrigeration technician.
You may also need
Fujitsu Downflow Conversion Kit for AMUH Air Handler
Fujitsu Filter Base for AMUH Air Handler
Fujitsu Remote Temperature Sensor – UTY-XSZXZ1
Fujitsu KAGAMI Wired Controller – UTY-RVRU
Fujitsu 24 V Thermostat Interface – UTY-TTRXZ1
Copper Electrical Wire
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01Original partsSee all
Frequently asked questions
Which kit fits my air handler?
Fujitsu pairs each kit with specific air handlers. For example, UTZ-EU03MSA and UTZ-EU06MSB2 are listed for the AMUH18KUAS. Send us your air handler model number and we confirm before ordering.
What is the difference between 1 and 2 stages?
A 2-stage kit heats in two steps: the first is often enough, the second comes on when demand rises. A 1-stage kit works as a single block.
Do these kits fit an AMUH30 to 48?
No. The AMUH30KUAS, AMUH36KUAS and AMUH48KUAS use the UTZ-EU…MMA and MMB2 series, on a separate page.
Can you install it?
Yes. We install the kit in the air handler and wire it, everywhere in Greater Montréal.
Genuine backup heat for your Fujitsu air handler
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.