Fujitsu Remote Temperature Sensor – UTY-XSZXZ1
The genuine wall sensor that reads the temperature in the room served by a Fujitsu ducted unit or air handler.
AirGreen codeAG-AC-078
514 316-2973 · sales@airgreen.ca
Quick facts
The Fujitsu UTY-XSZXZ1 remote temperature sensor is a wall-mounted sensor that measures the air temperature in the room being served. Fujitsu offers it for its ADUH slim ducted units, its ARUH medium static pressure ducted units and its AMUH multi-position air handlers.
Why put a sensor in the room
A ducted unit or air handler is often installed in a ceiling, an attic, a closet or a basement. The temperature read at the unit can then differ from that of the room you live in, and the heat pump shuts off too early or too late. The wall sensor brings the reading back into the room and helps the unit hold the set point where it matters. It is especially useful when the system is operated by a wireless remote, with no wall controller that has its own sensor.
Units listed by Fujitsu
- ADUH…KUAS slim ducted units
- ARUH…KUAS ducted units (for example ARUH12KUAS)
- AMUH…KUAS air handlers (for example AMUH12KUAS and AMUH48KUAS)
Placing it correctly
Choose an interior wall in the main room, at occupant height, away from direct sun, supply registers, heat-producing appliances and exterior doors. The reference sensor setting is made in the indoor unit.
Installed by AirGreen in Greater Montréal
We install the sensor, run the cable to the indoor unit and make the setting in Montréal, Laval, Longueuil, on the South Shore and on the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the model of your indoor unit.
Read the temperature where you live
A ducted unit or air handler is often far from the room it heats; the wall sensor brings the reading back into the room.
- Fujitsu ADUH slim duct units
- Fujitsu ARUH medium static ducted units
- Fujitsu AMUH multi-position air handlers
- Systems run by a wireless remote, with no wall controller sensor
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Mount the sensor on an inside wall, away from direct sun, air outlets and heat sources.
- The reference sensor is set in the indoor unit: have a technician do it.
- Send us the indoor unit model number to confirm compatibility.
- Fujitsu also offers UTY-XSZX: let us check which one fits your unit.
You may also need
Fujitsu IR Receiver Kit with Wireless Remote Control (Ducted and Air Handler) – UTY-LBTUM
Fujitsu KAGAMI Wired Controller – UTY-RVRU
Fujitsu Electric Heat Kit for AMUH12-24 Air Handler
Fujitsu Long Life Filter for Medium Static Pressure Ducted Unit
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)
Hitachi Port Adapter for airHome RAM-G Multi-ZoneOriginal partsSee all
Frequently asked questions
Is my unit compatible?
Fujitsu lists it for its ADUH slim duct, ARUH ducted and AMUH air handler units, including on the AMUH12KUAS, AMUH48KUAS and ARUH12KUAS sheets. Send us your model number and we confirm.
Why add a sensor?
When the indoor unit sits in a ceiling, attic or closet, the temperature it reads can differ from the room’s. The wall sensor reads where you live.
Do I need one with a wired remote?
Some Fujitsu remotes already have a built-in sensor, such as the UTY-RSRY. We advise based on the control you choose.
Can you install it?
Yes. We mount it, run the cable and make the setting in the indoor unit, everywhere in Greater Montréal.
An accurate temperature reading for your Fujitsu ducted unit
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.