Fujitsu IR Receiver Kit with Wireless Remote Control (Ducted and Air Handler) – UTY-LBTUM
The infrared receiver and wireless remote that let you control a hidden Fujitsu ducted unit or air handler.
AirGreen codeAG-AC-073
514 316-2973 · sales@airgreen.ca
Quick facts
The Fujitsu UTY-LBTUM IR receiver kit includes an infrared receiver and a wireless remote control. It is used with Fujitsu units installed out of sight, which cannot pick up a remote's signal directly: ARUH medium static pressure ducted units, ADUH slim ducted units and AMUH multi-position air handlers.
Controlling a ducted unit like a wall unit
The ducted unit hides in a ceiling, an attic or a closet. The receiver, on the other hand, goes in the room being served, recessed into a wall or ceiling, or surface-mounted. It is connected to the indoor unit by a 5 m cable, which can be extended up to 10 m with optional wire C. You keep the convenience of a handheld remote, with its wall holder.
What the kit includes
- The receiver, its cover, the insulation, wires A and B and the screws
- The wireless remote control, its holder and two R03/LR03 batteries
- The installation and operating manuals
Placing the receiver
Choose a spot with good signal reception, away from direct sunlight and air streams, and at least 1 m from fluorescent lighting. The remote's batteries last about a year in normal use. If you prefer a fixed control, Fujitsu also offers wired controllers such as the KAGAMI UTY-RVRU.
Installed by AirGreen in Greater Montréal
We install the receiver, connect it to the indoor unit and set up the remote control, in Montréal, Laval, Longueuil, on the South Shore and the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with your indoor unit model.
A remote for a unit you cannot see
A ducted unit hidden in the ceiling cannot pick up a remote’s signal: the receiver, set in the room, makes the link.
- Fujitsu ARUH medium static ducted units
- Fujitsu ADUH slim duct units
- Fujitsu AMUH multi-position air handlers
- Replacing a receiver or a lost remote
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Keep the receiver at least 1 m from fluorescent lighting.
- Avoid direct sun and direct airflow on the receiver.
- Batteries last about one year in normal use.
- Installation is for a technician: the receiver connects to the indoor unit.
- Receiver unit (1)
- Cover (1)
- Insulation (1)
- Receiver wires A and B (1 each)
- Bracket cover (1)
- Screws: 2 small and 2 large
- Wireless remote (1)
- R03/LR03 batteries (2)
- Remote holder (1)
- Installation and operating manuals
You may also need
Fujitsu KAGAMI Wired Controller – UTY-RVRU
Fujitsu Remote Temperature Sensor – UTY-XSZXZ1
Fujitsu Long Life Filter for Medium Static Pressure Ducted Unit
Fujitsu UTY-TFSXJ4 Wi-Fi Module for Non-Wall-Mounted Unit (UART)
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)
Hitachi Port Adapter for airHome RAM-G Multi-ZoneOriginal partsSee all
Frequently asked questions
Is my unit compatible?
Fujitsu lists UTY-LBTUM for its ARUH medium static ducted units, ADUH slim duct units and AMUH air handlers. Send us your indoor unit model number and we confirm.
Where should the receiver go?
In the room served, where it picks up the signal well, away from direct sun and airflow and at least 1 m from fluorescent lighting.
Is the cable long enough?
The standard cable is 5 m. With optional wire C, it can reach 10 m.
Can you install it?
Yes. We mount the receiver, connect it to the indoor unit and set up the remote, everywhere in Greater Montréal.
Wireless control for your Fujitsu ducted unit
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.