GENERAL AIRSTAGE Extension Kit – UTZJUXA
A genuine GENERAL AIRSTAGE part we order after confirming, from your model number, that it fits your equipment.
AirGreen codeAG-AC-111
514 316-2973 · sales@airgreen.ca
Quick facts
Among the manufacturer’s OEM parts is the GENERAL AIRSTAGE UTZJUXA extension kit. It matches, feature for feature, the same part under the Fujitsu AIRSTAGE brand: GENERAL Inc. is the name Fujitsu General Limited has carried since January 1, 2026, and AirGreen is an authorized GENERAL and Fujitsu AIRSTAGE dealer. Since each OEM kit is designed for specific units, we order it only after confirming, with your model numbers, that it suits your installation and the use you have in mind.
Why every part goes through a check
Each heat pump model has its own list of accessories and options, published by the manufacturer. Two units that look alike can call for different parts, and a wrong choice ends in a needless order followed by a return. Before any order, we therefore check your model number against the manufacturer’s documents.
What we need to receive
- the model number on the indoor unit’s nameplate, and the one on the outdoor unit’s
- the name of the refrigerant, also shown on the nameplate (R-32, R-410A…)
- if possible, a photo showing where the unit is installed
Finally, explain your project to us, whether it means replacing a part, adding a function or following a requirement in the manual. Our answer is clear: either the UTZJUXA kit does the job, or we point you to the appropriate part.
Locating the nameplate
Each unit’s model number and serial number can be read on its nameplate. A legible photo of each plate is all we need. If you cannot spot it, our technicians take care of it during the visit.
Installation done by our technicians
Our technicians install GENERAL and Fujitsu AIRSTAGE OEM parts in Montréal, Laval, Longueuil, on the North Shore and on the South Shore (AirGreen RBQ licence 5645-9605-01). Send your model numbers and the quantity you need to sales@airgreen.ca, or call 514 316-2973: we will get back to you with availability or a quote.
A GENERAL AIRSTAGE part, confirmed before ordering
The manufacturer’s genuine kits fit specific equipment: we confirm use and compatibility before any order.
- Adding a genuine kit to existing AIRSTAGE (GENERAL or Fujitsu) equipment
- Projects where the equipment manual calls for this kit
- Replacing a genuine part
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Send us the indoor and outdoor unit model numbers.
- Tell us what you need the kit for: we confirm it is the right one.
- Your equipment’s installation manual lists the kits it accepts.
- Have a qualified technician install it.
You may also need
GENERAL AIRSTAGE Leak Detection System Accessory – UTYSGZU
GENERAL AIRSTAGE UART Cable for Gas Sensor – UTYXWZXZL
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)
Hitachi Port Adapter for airHome RAM-G Multi-Zone
Hitachi PSC-6RAD H-Link Adapter for airHome Indoor Unit
Hitachi SPX-RAMHLK H-Link Adapter for airHome Multi-Zone Outdoor UnitOriginal partsSee all
Frequently asked questions
Is it compatible with my equipment?
We confirm compatibility with the manufacturer from your units’ model numbers, before any order.
Where is my model number?
On the nameplate fixed to each unit. A clear photo of each is enough for us.
Why check before ordering?
A genuine part is designed for specific equipment. Checking avoids a useless order and a return.
Can you install it?
Yes. Our technicians install genuine GENERAL and Fujitsu AIRSTAGE parts, everywhere in Greater Montréal.
A genuine GENERAL AIRSTAGE part, checked before ordering
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.
