514-316-2973
sales@airgreen.ca
Senville Pro Partner · Authorized dealer/installer
Senville’s floor consoles: two bodies, three capacities.
When the top of the wall is the wrong place (under a window, under a sloped ceiling), a unit set low can take over. Senville sells two very different bodies: a compact 12,000 BTU/h console and a wider body shared by the 18,000 and 24,000. Here are their dimensions, what Senville does and does not say about wall or ceiling mounting, and, certificates in hand, their heat in deep cold and their LogisVert amount.
Updated October 26, 2026 · ENERGY STAR, NEEP, Hydro-Québec, senville.ca and Senville manualENERGY STAR, NEEP and Hydro-Québec certified figures, read October 14, 2026, re-checked October 26, 2026. Bars scaled to the larger of the two values.
This page answersFor a room where a low unit suits better than a wall unit high on the wall (under a window, under a sloped ceiling): Senville’s two console bodies, what Senville does or does not say about wall or ceiling mounting, and what each one is worth, per its certificates, at −15 and −30 °C and for LogisVert.
Senville sells the 12,000 as a “Floor Console” and the 18,000 and 24,000 as “Floor Mounted”; in French, all three are “Montage au Sol”.
Both front views are drawn to the same scale from the dimensions Senville prints. For the 18,000 and 24,000, Senville gives a 235 mm height, the smallest of the three figures, without saying whether the unit sits flat or on its edge: the drawing shows both readings. The sill line is an example for scale, not a Senville value.
| Printed dimensions, W × D × H | 31.26 × 7.87 × 24.45 in794 × 200 × 621 mm, converted |
|---|---|
| Weight | 32.85 lb (14.9 kg) |
| Airflow, turbo · low | 441.4 · 188.4 CFM |
| Sound, turbo · low | 44 · 26.5 dB |
| Moisture removal | 1.48 L/h |
| Circuit: ampacity · fuse | 15 A · 15 A |
| Installation manual | none found for the 12,000 |
| Printed dimensions, W × D × H | 42.05 × 26.57 × 9.25 in1,068 × 675 × 235 mm in the manual, under letters A to C with no legend |
|---|---|
| Weight | 18,000: 58.42 lb24,000: 61.29 lb |
| Airflow, turbo · low | 576.8 · 420.8 CFMthe 24,000 table prints the same values as the 18,000: not confirmed |
| Sound, turbo · low | 18,000: 45 · 30.5 dB24,000: 51.5 · 34 dB |
| Moisture removal | 18,000: 1.73 L/h24,000: 2.73 L/h |
| Circuit: ampacity · fuse | 18,000: 19 · 20 A24,000: 25 · 25 A |
| Room height | at least 2.2 m (7.3 ft), per the manual |
| Recommended clearance (manual diagram) | at least 1,000 mm |
| Drain | slope of at least 1/100, outlet at least 50 mm above the ground |
Inch dimensions: senville.ca spec tables, October 14, 2026; millimetre dimensions of the 18,000 and 24,000: installation manual QS003I-DL(R454B), 2024-04-28, p. 13, re-read October 26, 2026; those of the 12,000 are converted from inches. Room height, unit spacing and drain: same manual, which covers the 18,000 to 60,000 and not the 12,000. Sound: senville.ca values, test conditions not published.
Seven Senville and NEEP quotes, word for word, and one finding, with what each one actually says about mounting.
“12000 BTU Floor Console Air Conditioner - Heat Pump - SENA/12HF/IF”
senville.ca, 12,000 page title“18000 BTU Floor Mounted Mini Split Air Conditioner - Heat Pump - SENA/18HF/IF”
senville.ca, 18,000 page title; the 24,000 is named the same way“12000 BTU Climatiseur Montage au Sol - Thermopompe - SENA/12HF/IF”
fr.senville.ca, “Montage au Sol” category; 18,000 and 24,000 named the same wayNone of the three senville.ca pages mentions the wall, the ceiling or convertible mounting.
senville.ca, SENA/12HF/IF, SENA/18HF/IF and SENA/24HF/IF pages“This air conditioner can be installed on the wall or suspended from the ceiling.”
Installation manual QS003I-DL(R454B), p. 4, linked from the pages; it covers the 18,000 to 60,000, not the 12,000, has a “Ceiling Installation” and a “Wall-Mounted Installation” section, and does not mention the floor“24000 BTU Floor/Ceiling Indoor Unit”
senville.ca, related product shown on the 24,000 page; the page does not say this model mounts on the ceiling12,000: “Wall Placement” · 18,000 and 24,000: “Floor Placement”
NEEP, configuration category of records 215735308, 215735309 and 215735310“Floor-Mounted Units: SENA-12HF-IFG, SENA-18HF-IFG, SENA-24HF-IFG”
Senville help centre, model-number article, read October 26, 2026; its manuals are filed under “Ceiling Floor Series” and “Console Series”What we take from it: Senville sells all three for the floor. For the 12,000, no Senville document says it can go anywhere but the floor. For the 18,000 and 24,000, the only text that does, the manual, says wall or ceiling; until a Senville product page confirms it, a ceiling installation has to be cleared with Senville before quoting.
Pages read October 14, 2026; manual re-read and help-centre article read October 26, 2026; NEEP, read October 14, 2026, re-checked unchanged October 26, 2026.
The certificates pair the SENA-12HF-OG outdoor unit with two indoor units sold here: the SENA-12HF-IFG console and the SENA-12HF-IGG AURA wall unit. Same outdoor unit, two ways of heating the room.
Same outdoor unit, both certified down to −30 °C. At −8.3 °C, the AURA wall unit gives a rated 12,000 BTU/h and the console 9,800, hence a higher LogisVert amount ($1,440 vs $1,176); at −30 °C, it also keeps more maximum heat (5,900 vs 4,800). The console has the better HSPF2 region V (8.3 vs 8) and the better COP at −15 °C (1.88 vs 1.80).
| At 12,000 BTU/h | Console 12,000SENA-12HF-IFG | AURA wall unit 12,000SENA-12HF-IGG |
|---|---|---|
| Indoor unit | SENA-12HF-IFG | SENA-12HF-IGG |
| Outdoor unit | SENA-12HF-OG | SENA-12HF-OG |
| Mounting | on the floor | on the wall |
| Indoor unit, W × D × H | 31.26 × 7.87 × 24.45 in | 33.4 × 9.18 × 11.76 in |
| Indoor unit weight | 32.85 lb | 24.25 lb |
| SEER2 · EER2 | 25 · 12.5 | 25.4 · 13.4 |
| HSPF2, region IV | 10.5 | 10.5 |
| HSPF2, region V | 8.3 | 8 |
| Heat at 8.3 °C | 12,000 BTU/hCOP 3.86 | 12,000 BTU/hCOP 3.74 |
| Heat at −8.3 °C | 9,800 BTU/hCOP 2.71 | 12,000 BTU/hCOP 2.51 |
| Heat at −15 °C | 11,300 BTU/hCOP 1.88 | 11,500 BTU/hCOP 1.80 |
| COP at −15 °C | 1.88 | 1.80 |
| Maximum at −30 °C | 4,800 BTU/hCOP 1.04 | 5,900 BTU/hCOP 1.25 |
| LogisVert, indicative | $1,176 | $1,440 |
| Min. ampacity · max. fuse | 15 A · 15 A | 12 A · 15 A |
| ENERGY STAR | 3630055cold climate | 3630043cold climate |
| AHRI certificate | 215735308 | 215735296 |
| Senville warranty | the same for both: 10 years on the compressor, 5 years on parts | |
best figure in the row
Certified data: ENERGY STAR, NEEP and Hydro-Québec, read October 14, 2026, re-checked unchanged October 26, 2026. Dimensions, weight and electrical: senville.ca SENA/12HF/IF and SENA-12HF pages, October 14, 2026. On senville.com, the SENA-12HF-OG outdoor unit page calls it compatible with “wall-mount, cassette, concealed duct” indoor units without naming the consoles; the console pair is certified all the same (AHRI 215735308, ENERGY STAR 3630055). Warranty terms
One column per console we sell, with no best-figure mark since the sizes differ. All three are ENERGY STAR cold-climate certified and on the LogisVert list.
| Capacity | Console 12,000SENA-12HF-IFG | Console 18,000SENA-18HF-IFG | Console 24,000SENA-24HF-IFG |
|---|---|---|---|
| Outdoor · indoor units | SENA-12HF-OGSENA-12HF-IFG | SENA-18HF-OGSENA-18HF-IFG | SENA-24HF-OGSENA-24HF-IFG |
| Rated cooling at 35 °C | 12,000 BTU/h | 17,000 BTU/h | 22,000 BTU/h |
| SEER2 · EER2 | 25 · 12.5 | 20.4 · 12.5 | 20.4 · 12 |
| HSPF2, regions IV · V | 10.5 · 8.3 | 10.3 · 8.2 | 12.1 · 9.8 |
| Heat at 8.3 °C | 12,000 BTU/hCOP 3.86 | 19,000 BTU/hCOP 3.06 | 26,000 BTU/hCOP 3.34 |
| Heat at −8.3 °C | 9,800 BTU/hCOP 2.71 | 14,400 BTU/hCOP 2.54 | 20,200 BTU/hCOP 2.74 |
| Heat at −15 °C | 11,300 BTU/hCOP 1.88 | 17,000 BTU/hCOP 1.86 | 24,200 BTU/hCOP 2.16 |
| Maximum at −30 °C | 4,800 BTU/hCOP 1.04 | 8,400 BTU/hCOP 1.33 | 10,500 BTU/hCOP 1.33 |
| LogisVert, indicative | $1,176 | $1,728 | $2,424 |
| ENERGY STAR | 3630055cold climate | 3630056cold climate | 3630057cold climate |
| AHRI certificate | 215735308 | 215735309 | 215735310 |
| Line length · drop | not published | 30 m · 20 m98.4 · 65.6 ft | 50 m · 25 m164 · 82 ft |
On October 14, 2026, the senville.ca SENA/18HF/IF and SENA/24HF/IF pages linked AHRI certificates 215735302 and 215735303, those of the ducted units of the same size. The SENA-18HF-OG + SENA-18HF-IFG and SENA-24HF-OG + SENA-24HF-IFG console pairs carry numbers 215735309 and 215735310 at ENERGY STAR, NEEP and Hydro-Québec: those are the ones we show. The Senville-hosted file “SENA-12HF-IFG-AHRI.pdf” actually shows the ducted 12,000 certificate; no console certificate could be read on senville.com. The 24,000 cools a rated 22,000 BTU/h and the 18,000 17,000, per their certificates. Line lengths: manual QS003I-DL(R454B), which does not cover the 12,000. Senville warranty for all three: 10 years on the compressor, 5 years on parts.
Senville sells all three for the floor, and no product page says these models mount on a wall or ceiling. The only Senville text that does is installation manual QS003I-DL(R454B), linked from the pages: “This air conditioner can be installed on the wall or suspended from the ceiling.” It covers the 18,000 and 24,000 (up to 60,000), not the 12,000, and does not mention the floor. For the 12,000, nothing is published; for the 18,000 and 24,000, a ceiling installation has to be cleared with Senville.
senville.ca SENA/12HF/IF, SENA/18HF/IF and SENA/24HF/IF pages, October 14, 2026; manual QS003I-DL(R454B), re-read October 26, 2026.At least 2.2 m (7.3 ft), per the installation manual for the 18,000 and 24,000, which also shows a recommended clearance of at least 1,000 mm. The same manual asks for a drain slope of 1/100 or more and an outlet 50 mm or more above the ground. Senville does not publish these limits for the 12,000 console.
Installation manual QS003I-DL(R454B), 2024-04-28, pp. 3, 13 and 17, read October 14, 2026 and re-read October 26, 2026.senville.ca sells the systems as SENA/12HF/IF, SENA/18HF/IF and SENA/24HF/IF. The indoor units are the SENA-12HF-IFG, SENA-18HF-IFG and SENA-24HF-IFG, paired with the SENA-12HF-OG, SENA-18HF-OG and SENA-24HF-OG outdoor units. Here the sources agree: the help centre’s “Floor-Mounted Units” list gives exactly these three IFG codes, the certified ones.
Question published by Senville: “What are the wall mount, cassette, duct, and floor unit model numbers?”, help centre, modified October 8, 2026, read October 26, 2026; ENERGY STAR and NEEP.Senville prints 1.48 L/h for the 12,000, 1.73 L/h for the 18,000 and 2.73 L/h for the 24,000 (“Moisture Removal”), without stating the test conditions. They are spec-table values, not certified ones.
senville.ca SENA/12HF/IF, SENA/18HF/IF and SENA/24HF/IF pages, October 14, 2026.Yes, according to the certificates: the SENA-12HF-OG outdoor unit is certified with the SENA-12HF-IFG console (AHRI 215735308) as well as with the SENA-12HF-IGG AURA wall unit (AHRI 215735296). The senville.com page for that outdoor unit only names wall, cassette and ducted indoor units; we rely on the certified pair. The table above compares the two.
ENERGY STAR (3630055 and 3630043), NEEP and Hydro-Québec, read October 14, 2026, re-checked unchanged October 26, 2026; senville.com, SENA-12HF-OG, October 14, 2026.
We look at the window, the clear height and the pipe route, choose between the 12,000 console and the 18,000 / 24,000 body; the quote shows the AHRI certificate of the chosen console and its LogisVert amount, which stays indicative.
Applies to the whole Senville range
LogisVert amounts are indicative: Hydro-Québec confirms them when you apply. Prices on quotation.
