Hitachi SPX-WDST8M 8 m (26.2 ft) Cable for SPX-DST1 Distributor
The genuine 8 m cable Hitachi specifies for the SPX-DST1 group control distributor.
AirGreen codeAG-AC-050
514 316-2973 · sales@airgreen.ca
Quick facts
The SPX-WDST8M cable is 8 m (26.2 ft) long. Hitachi lists it in the airHome line's submittal sheets as the cable for the SPX-DST1 distributor, the accessory that groups several indoor units under a single wired remote control.
Wiring a group control
In a store, an office or a common room, several indoor units often run together. With the SPX-DST1 distributor, a single wall control sets them all; one distributor can be linked to three others, for up to 13 indoor units, according to Hitachi. The SPX-WDST8M cable is the genuine part specified for these connections.
Units Hitachi lists it for
- airHome 400, 600 and 800 wall units.
- RAK-GJ, RAK-DJ07 and RAF-FJ multi-zone wall and console units.
- RAD-GJ ducted units and RAI-GJ mini-cassettes.
Plan it right
The number of cables depends on the number of units and how they are laid out. Measure the distances, or send us a rough plan: we work out the quantity. To connect the SPX-URFG1 wall control to a wall unit, Hitachi offers a different cable, the 5 m SPX-WKT5M.
Installed by AirGreen in Greater Montréal
We run the cables, connect the distributor and commission the group in Montréal, Laval, Longueuil, on the South Shore and the North Shore. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the number of units and the quantity.
Wiring for group control
The SPX-DST1 distributor groups several units under one controller; this 8 m cable is the one Hitachi pairs with it.
- Installing an SPX-DST1 distributor on airHome units
- Group control in a store, office or common room
- Replacing a damaged cable
- Adding a unit to an existing group
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Measure the distances between units and the distributor before ordering.
- Plan one cable per link.
- The distributor works with a wired controller, such as the SPX-URFG1.
- Wiring is done powered off, by a technician.
You may also need
Hitachi SPX-DST1 Group Control Distributor for airHome
Hitachi airPoint Room H700 SPX-URFG1 Wired Remote Control for airHome
Hitachi SPX-WKT5M 5 m (16.4 ft) Cable for SPX-URFG1 Remote Control
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)
Hitachi Port Adapter for airHome RAM-G Multi-Zone
Hitachi PSC-6RAD H-Link Adapter for airHome Indoor UnitOriginal partsSee all
Frequently asked questions
How many do I need?
It depends on the number of units in the group and their layout. Send us a rough plan and we work out the quantity.
Does it come with the distributor?
Hitachi lists it as a separate accessory in its submittal sheets.
Can it be used for the SPX-URFG1 controller?
For the wall controller on airHome wall units, Hitachi offers the 5 m SPX-WKT5M cable instead.
Can you install it?
Yes. We run the cables, connect the distributor and commission it, everywhere in Greater Montréal.
The genuine cable for your group control
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.