THERMO 2000 BTH Ultra 27 Electric Boiler | 27 kW - 240V

In stock

The Thermo 2000 BTH ULTRA 27 is a 27 kW, 240 V wall-mounted electric boiler with six 4.5 kW elements controlled over six stages.

Model numberBTH ULTCA 27

27 kWat 240 V (92,124 BTU/h)
6 stagessix 4.5 kW elements
1 1/4 infemale NPT water connections
240 V · single phaseSix elementsOutdoor sensor supplied
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

Model numberBTH ULTCA 27
ManufacturerThermo 2000
Output27 kW at 240 V (92,124 BTU/h)
Elements6 x 4.5 kW, 6 stages
Current112.5 A at 240 V
Breaker2 x 80 A or 150 A
Water volume3 US gal

Six 4.5 kW stages to fine-tune the heat of a large hot water loop

What the BTH ULTRA 27 is

With its six 4.5 kW elements, Thermo 2000’s BTH ULTRA 27 reaches 27 kW at 240 V, or 92,124 BTU/h. It remains a wall-mounted boiler: 75 lb, 3 US gallons of water and 1 1/4 in female NPT connections. The T2 UltraSmart controller runs its elements over six stages and draws only the output the loop needs.

This size is aimed at buildings with a significant heating demand: a large home with radiant floors on several levels, an apartment building sharing a hot water loop, a business or an institutional space. Thermo 2000 presents it for these three uses, in new construction as well as replacement, and as backup for a heat pump, geothermal or solar system.

Why six stages make a difference

A large loop almost never calls for full output. In October, a few kilowatts are enough; in January, demand climbs. With six 4.5 kW steps, the boiler follows these changes closely instead of jumping abruptly from one large stage to the next. The supplied outdoor sensor lets the controller set the water temperature on one of three curves (MIN, STD, MAX), and warm weather shutdown rests it when heat is not needed.

The controller also offers presets by distribution system, a backlit display, Boost mode, pump purge and a 24 V supply for the thermostat and accessories. The operating range is 50 °F to 190 °F (10 °C to 90 °C).

What to plan electrically

At 240 V single phase, the BTH ULTRA 27 draws 112.5 A. Thermo 2000 lists two protection options: two 80 A breakers or a single 150 A breaker. The wire gauge is determined with the installation manual based on the option chosen. At 208 V, output is multiplied by 0.75. We validate these points before proposing this size.

What AirGreen’s installation covers

The free on-site estimate lets us assess the loop, the electrical service and the wall location. You then receive a written quote. Our technicians install the boiler, connect it to the loop and the electrical circuit, fill and purge the system, then set the preset and temperature curve for the building. Thermo 2000 covers the tank for 15 years and electrical and mechanical components for 2 years.

AirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work.

Let’s talk about your project

We work in Montreal, Laval, Longueuil, on the South Shore and on the North Shore.

Ask for your free estimate and receive a written quote for your BTH ULTRA 27; financing is available.

01 · What it is for

Six heating stages for more demanding buildings

The BTH ULTRA 27 serves large hot water loops: extensive radiant floors, radiators, baseboards. Thermo 2000 designs it for residential, commercial and institutional applications, and as backup for a heat pump, geothermal or solar system.

  • Large home with radiant floors on several levels
  • Apartment building or business served by a hot water loop
  • Replacing an electric boiler of similar output
  • Backup for a geothermal system or a heat pump
Six 4.5 kW stepsThe T2 UltraSmart controller modulates output based on demand, over six stages.
1 1/4 in connections1 1/4 in female NPT water connections, with two reducers supplied.
15-year warrantyThermo 2000 covers the tank for 15 years and electrical and mechanical components for 2 years.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

ManufacturerThermo 2000
Thermo 2000 designationBTH ULTRA 27 (residential, 240 V single phase)
TypeWall-mounted electric hot water boiler
Output at 240 V27 kW (92,124 BTU/h)
Power supply240 VAC, 60 Hz, single phase
Operation at 208 VOutput x 0.75; current x 0.867 (Thermo 2000 factors)
Current at 240 V112.5 A
Breaker2 x 80 A or 150 A
Heating elements6 x 4.5 kW
Stages6
Water volume3 US gal
Water connections1 1/4 in female NPT (return and supply)
Temperature range50 °F to 190 °F (10 °C to 90 °C)
High limitsAutomatic 208 °F (98 °C); manual 227 °F (108 °C)
Maximum working pressure30 psi (207 kPa)
Weight75 lb
ControlsT2 UltraSmart controller: backlit display, presets by distribution system, output modulation based on demand, water temperature based on the outdoor sensor (MIN, STD, MAX curves), warm weather shutdown, Boost mode, pump purge, 24 V for thermostat and accessories
Manufacturer warrantyTank: 15 years; electrical and mechanical components: 2 years
Model numberBTH ULTCA 27
03 · Before installing

What to know before installing

  • 240 V single-phase, 60 Hz power supply: the unit draws 112.5 A. Thermo 2000 lists protection of 2 x 80 A or 150 A.
  • Wire gauge is determined with Thermo 2000’s installation manual, based on the protection option chosen.
  • At 208 V, output is multiplied by 0.75 and current by 0.867, according to Thermo 2000.
  • 75 lb wall-mounted boiler holding 3 US gal of water; maximum working pressure of 30 psi (207 kPa).
In the box
  • 30 psi relief valve
  • Drain valve
  • 2 reducers
  • Outdoor sensor
  • Temperature and pressure gauge
04 · Documents

Manufacturer documents

05 · See also

Explore the range

Same category
Electric boilers
See all
Same brand
THERMO 2000
See all
06 · Questions

Frequently asked questions

What does “2 x 80 A or 150 A” mean for the breaker?

Thermo 2000 lists two protection options for this model: two 80 A breakers or a single 150 A breaker. We choose the option and the wire gauge with the installation manual and based on your panel.

Why six elements?

Six 4.5 kW elements over six stages let the T2 UltraSmart controller adjust output in 4.5 kW steps, based on the loop’s demand.

What water connections are needed?

The boiler connects with 1 1/4 in female NPT fittings on the return and supply. Two reducers are supplied.

Can it back up a geothermal system?

Yes. Thermo 2000 presents the BTH ULTRA as backup for a heat pump, a geothermal system or a solar system.

What warranty does Thermo 2000 offer?

15 years on the tank and 2 years on electrical and mechanical components.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

A 27 kW BTH ULTRA, installed by AirGreen

Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 19, 2026.