Élios Heating Element for EAHM Air Handler
The original heater kit for the Central-Elios EAHM multi-position air handler, from 5 to 25 kW.
AirGreen codeAG-AC-01205
514 316-2973 · sales@airgreen.ca
Quick facts
The Élios EAHxxEUL series heating element is the electric backup heat for the Central-Elios EAHM multi-position air handler. It covers six nominal outputs, from 5 to 25 kW, at 208-230 V single-phase. According to the manufacturer's drawing, each element carries its own relay and breaker.
The electric complement to the central heat pump
With an EAHM air handler, the central heat pump heats the house through the existing ducts. The element takes over when the heat pump needs extra heat, which makes it a common solution for replacing an electric furnace. The 5, 8 and 10 kW elements heat in one stage; the 15, 20 and 25 kW elements, in two stages.
Outputs listed by air handler size
- 5 kW: EAHMA24, 30 and 36.
- 8 kW: EAHMA24 to 48.
- 10 and 15 kW: EAHMA24 to 60.
- 20 kW: EAHMA36 to 60.
- 25 kW: EAHMA60 only.
Circuits and power supply
The 5, 8 and 10 kW elements connect to a single circuit. The 15 and 20 kW require two and the 25 kW, three, each with its own MCA and maximum overcurrent protection value. At 230 V, the 25 kW draws 100 A in total for 23 kW actual. The values for each size are shown in the table when you select it. Have the capacity of your electrical service confirmed before choosing a high output.
Installed by AirGreen in Greater Montréal
We install the element in your Élios air handler and set up the backup heat with the heat pump in Montréal, Laval, Longueuil, on the South Shore and on the North Shore; the supply circuit is done by a master electrician. RBQ licence 5645-9605-01. For availability or a quote, call us at 514 316-2973 or email sales@airgreen.ca with the air handler model, the output and the quantity.
Backup heat for the Élios central heat pump
In an EAHM air handler, the kit tops up the central heat pump and can heat on its own when needed.
- Backup heat for a Central-Elios heat pump with an EAHM air handler
- All-electric homes with no furnace
- Replacing an electric furnace with an air handler and a heat pump
- Replacing an EUL-series heater
6 sizes, one page
Each size has its own AirGreen code. Tap a row to select it.
| Model | Stages / circuits | Actual output at 208 / 230 V | Total current at 208 / 230 V | Total MCA at 208 / 230 V | Total MOCP at 208 / 230 V | Net weight | Compatible air handlers | Part no. | AirGreen code |
|---|---|---|---|---|---|---|---|---|---|
| 5 kW – EAH05EUL | 1 / 1 | 3.75 / 4.6 kW | 18 / 20 A | 23 / 27 A | 25 / 30 A | 2.6 kg (5.7 lb) | EAHMA24, EAHMA30, EAHMA36 | EAH05EUL | AG-AC-01201 |
| 8 kW – EAH08EUL | 1 / 1 | 6 / 7.35 kW | 28.8 / 32 A | 37 / 42 A | 40 / 45 A | 3.3 kg (7.3 lb) | EAHMA24, EAHMA30, EAHMA36, EAHMA48 | EAH08EUL | AG-AC-01202 |
| 10 kW – EAH10EUL | 1 / 1 | 7.5 / 9.2 kW | 36.1 / 40 A | 46 / 53 A | 50 / 60 A | 3.1 kg (6.8 lb) | EAHMA24, EAHMA30, EAHMA36, EAHMA48, EAHMA60 | EAH10EUL | AG-AC-01203 |
| 15 kW – EAH15EUL | 2 / 2 | 11.25 / 13.8 kW | 54.1 / 60 A | 69 / 80 A | 75 / 90 A | 4 kg (8.8 lb) | EAHMA24, EAHMA30, EAHMA36, EAHMA48, EAHMA60 | EAH15EUL | AG-AC-01204 |
| 20 kW – EAH20EUL | 2 / 2 | 15 / 18.4 kW | 72.1 / 80 A | 92 / 106 A | 100 / 120 A | 4.4 kg (9.7 lb) | EAHMA36, EAHMA48, EAHMA60 | EAH20EUL | AG-AC-01205 |
| 25 kW – EAH25EUL | 2 / 3 | 18.75 / 23 kW | 90.1 / 100 A | 115 / 133 A | 125 / 150 A | 5.7 kg (12.6 lb) | EAHMA60 | EAH25EUL | AG-AC-01206 |
Nominal output. Actual values, circuits and compatible air handlers are in the table for the size you pick.
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Each rating is listed for certain air handler sizes only: check the table for the size you pick.
- The 15 and 20 kW kits have 2 supply circuits and the 25 kW has 3, each with its own protection.
- The 25 kW kit needs up to 133 A total MCA at 230 V: your electrical service must handle it.
- The supply circuit is done by a licensed electrician, with the unit powered off.
Manufacturer documents
You may also need
Élios COMM 24 V Smart Thermostat – ST1S42RW1
Élios Programmable Wi-Fi Wired Controller – KJRSAALW1
Élios Programmable Wired Controller – KJRSAALN1
Élios 24 V Mini Interface – MI3C1
Copper Electrical Wire
Fujitsu Leak Detection System Accessory – UTYSGZU
Hitachi 5-Wire Adapter for 24 V Thermostat – C3STAT01
Hitachi C1STAT01 5-Wire Thermostat Adapter (airHome)Original partsSee all
Frequently asked questions
Which kit fits my EAHM air handler?
Per the Élios submittals: 5 kW for the EAHMA24 to 36, 8 kW up to the 48, 10 and 15 kW for every size from 24 to 60, 20 kW for 36 to 60 and 25 kW for the 60 only. We pick the rating from a heating load calculation.
How many circuits do I need?
One for the 5, 8 and 10 kW kits, two for the 15 and 20 kW and three for the 25 kW, per the manufacturer’s sheet. Each circuit has its own MCA and max. overcurrent protection.
Can I use a 24 V thermostat?
Élios lists its ST1S42RW1 smart thermostat and its wired controllers for the EAHM. The MI3C1 mini interface also lets you connect a standard 24 V thermostat, with some functions possibly reduced.
Can you install it?
Yes. We fit the kit in the air handler and set up the backup heat with the heat pump; the supply circuit is run by a licensed electrician, everywhere in Greater Montréal.
Original backup heat for your Élios EAHM air handler
Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 7, 2026.