GENERAL AIRSTAGE UTY-XWZX Dry Contact Kit (On/Off and Run Status)

In stock

The genuine GENERAL wire harness that lets an outside contact start or stop the heat pump, and reports whether it is running.

AirGreen codeAG-AC-083

1 inputon/off by dry contact
1 outputrun status
24 V DCmaximum on the output
Dry contactGenuine part
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

AirGreen codeAG-AC-083
BrandGENERAL (formerly Fujitsu General)
Part no.UTY-XWZX
Manufacturer nameExternal Wire Kit (Dry Contact Wire Kit)
ForAIRSTAGE wall-mount and floor units
FunctionsExternal on/off, status output

The GENERAL AIRSTAGE UTY-XWZX dry contact kit, same as the Fujitsu AIRSTAGE one, is the original harness that puts an AIRSTAGE heat pump in touch with an external device. Since January 1, 2026, the manufacturer has been called GENERAL Inc. rather than Fujitsu General Limited; its factories, its AIRSTAGE products and its model numbers are unchanged, and AirGreen remains an authorized dealer for both brands. In the manufacturer’s accessory lists, this harness goes by the name “External Wire Kit”. In practice, it gives the unit an on/off input driven by a dry contact and a run status output. The same part under the Fujitsu AIRSTAGE brand is still on sale next to the GENERAL version.

A contact that starts and stops the heat pump

Close the contact wired to the orange and yellow wires, and the unit starts; open it, and the unit stops. On the output side, the blue and purple wires form a contact that closes while the unit runs: it can light an indicator or alert a controller. For a hotel key card, an occupancy sensor, a window contact or a timer, it is the straightforward way to do it.

Electrical data

  • Input: field-supplied dry contact, 12 V DC, 10 mA
  • Output: up to 24 V DC, from 10 mA to 1 A
  • Beyond the harness’s reach: mode, set point, fan speed and detailed error codes

What the manufacturer specifies

For the R-32 H series, the manufacturer pairs it with the Altair 500 (ASUH**KPAS), Orion XLTH (ASUH**KZAS) and Orion XLTH+ wall units, as well as the AGUH**KUAS floor units. Cassettes and ducted units fall under another harness, the UTY-XWZXZG. To get an error output as well, you need to step up to the UTY-XWZXZ5.

Wiring by AirGreen, from Laval to the South Shore

We connect the harness inside the unit and tie it to your external contact in Montréal, Laval, Longueuil, on the South Shore and on the North Shore, work covered by our RBQ licence 5645-9605-01. Keep your indoor unit’s model number handy and reach us at 514 316-2973 or sales@airgreen.ca to check availability or get a quote.

01 · What it is for

Simple control from outside the unit

Close a contact and the unit starts; open it and the unit stops. The output reports back whether it is running.

  • Key-card switch or occupancy sensor in a hotel or rental unit
  • Timer or home automation controller
  • Window contact that stops the unit when opened
  • Pilot light or controller that needs to know the unit is running
On/off inputOrange and yellow wires: contact closed = on, contact open = off.
Status outputBlue and purple wires: the contact closes while the unit runs.
Basic functionsMode, setpoint and fan speed do not go through this harness.
Compatible with
ASUH**KPASASUH**KZASASUH**KTASASUH**KTABAGUH**KUAS
Per the manufacturer. Send us your unit’s model number and we confirm before ordering.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

BrandGENERAL (formerly Fujitsu General)
Part no.UTY-XWZX
TypeDry contact harness (external input/output)
InputOn/off, field-supplied dry contact (orange and yellow wires)
Input contact rating12 V DC, 10 mA
OutputRun status (blue and purple wires)
Output load24 V DC max, 10 mA to 1 A
Listed units (R-32 H-Series)Altair 500, Orion XLTH, Orion XLTH+ wall-mount; AGUH floor
AirGreen codeAG-AC-083
03 · Before installing

What to know before installing

  • The input accepts only a field-supplied dry (voltage-free) contact.
  • Input contact: 12 V DC, 10 mA; output: 24 V DC max, 10 mA to 1 A.
  • For an error signal or a forced stop, the manufacturer offers the UTY-XWZXZ5.
  • The connection point depends on the indoor unit: its installation manual governs.
04 · Goes with

You may also need

Same category
Original parts
See all
05 · Questions

Frequently asked questions

Is my GENERAL or Fujitsu unit compatible?

The manufacturer lists the UTY-XWZX among the accessories of its Altair 500 (ASUH**KPAS), Orion XLTH (ASUH**KZAS) and Orion XLTH+ wall-mount units and its AGUH**KUAS floor units. Cassettes and ducted units use the UTY-XWZXZG. Send us your model number and we confirm.

How is it different from the UTY-XWZXZ5?

The UTY-XWZX handles on/off and reports run status. The UTY-XWZXZ5 adds an error output and lets the input act as a forced stop.

Can it set the temperature?

No. It carries no mode, setpoint or fan speed. For full control you need an interface such as the UTY-VMSX Modbus converter or the UTY-TTRXZ1 thermostat interface.

Can you install it?

Yes. Our technicians connect it to the unit’s board and to your external contact, everywhere in Greater Montréal.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

Connect your GENERAL or Fujitsu heat pump to an external contact

Tell us the size and the quantity: we confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 7, 2026.