-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
-
Added to comparison
Midea add-on: keep your furnace, add an EVOX G3 heat pump.
The EVOX G3 outdoor unit and a Midea coil set on your existing furnace. The heat pump heats first, down to -30 °C according to Midea; the furnace stays for the days the house needs it. LogisVert: $1,824 to $4,536 depending on the combination.
Your size, your coils
Pick the size of your current air conditioner or system: the outdoor unit + coil combinations, their heat and their LogisVert amount.


2 combinations at 1.5 tons: the coil is chosen to match your furnace width.


2 combinations at 2 tons: the coil is chosen to match your furnace width.



3 combinations at 2.5 tons: the coil is chosen to match your furnace width.


2 combinations at 3 tons: the coil is chosen to match your furnace width.
1 combination at 4 tons: the coil is chosen to match your furnace width.


2 combinations at 5 tons: the coil is chosen to match your furnace width.
A Midea add-on, a local team.
MIDEA designs the heat pump and the coil. AirGreen assesses your furnace, picks the pair with you and installs it.
What MIDEA brings
- Down to -30 °CEVOX G3 outdoor unit, according to Midea.
- 100% down to -25 °CEVOX G3, according to Midea.
- Four coil widthsAA, BA, CA and DA, to line up with your furnace.
- Up to 12 yearsParts and compressor, single-family home, registered within 60 days.
What AirGreen brings
- MIDEA PRO dealerSpecialized Midea technical training completed.
- Free home estimateWe look at the furnace, the space above it, the blower and the ducts.
- Warranty and LogisVertWe show you the Midea registration and give you the AHRI number for Hydro-Québec.
- RBQ 5645-9605-01Subclasses 15.8, 15.10 and 16.
The result: a Midea heat pump on your furnace, picked with you and installed by a MIDEA PRO team.
Your furnace stays. The heat pump goes on top.
The add-on is the EVOX G3 outdoor unit and a Midea MAAHE coil set on your existing furnace. The heat pump heats first; the furnace stays in place for the days the house needs it.
Space above the furnace, blower condition, ducts and refrigerant line route.
The outdoor unit size and the matching coil: that pair carries the AHRI number.
The furnace stays for the days the house needs it. In summer, the same heat pump cools.
MAAHE coil widths (AA, BA, CA, DA): Midea dimensions shown on our product pages. Principle and steps: our MIDEA page of Oct. 6, 2026.
Who heats when? Switch to see.
“Heat pump”: the Midea outdoor unit heats through the coil. “Furnace”: your furnace takes over. In summer, the same heat pump cools.
AirGreen principle diagram: unit positions and line lengths vary from house to house.
Twelve combinations, all ENERGY STAR cold climate.
Each row is an outdoor unit + coil pair, with its own AHRI number. Blue marks the best value in each column within the same size.
| Size and combination | Coil | Heat at 8 °C | Heat at -8 °C | Max. at -15 °C | Max. at -30 °C | SEER2 | HSPF2 | LogisVert | AHRI |
|---|---|---|---|---|---|---|---|---|---|
| Add-on 1.5 tonsMO1HE-H18B-2A + MAAHE-H24B-AA | AA · 14 1/2 in. | 19,000 BTU/h | 15,200 BTU/h | 18,000 BTU/h | 11,500 BTU/h | 16.1 | 9.5 | $1,824 | 216623518 |
| Add-on 1.5 tonsMO1HE-H18B-2A + MAAHE-H24B-BA | BA · 17 1/2 in. | 19,000 BTU/h | 15,200 BTU/h | 18,000 BTU/h | 11,500 BTU/h | 16.1 | 9.5 | $1,824 | 216623520 |
| Add-on 2 tonsMO1HE-H24B-2A + MAAHE-H24B-AA | AA · 14 1/2 in. | 25,000 BTU/h | 19,700 BTU/h | 21,000 BTU/h | 12,100 BTU/h | 16.0 | 9.5 | $2,364 | 216623519 |
| Add-on 2 tonsMO1HE-H24B-2A + MAAHE-H24B-BA | BA · 17 1/2 in. | 25,000 BTU/h | 19,700 BTU/h | 21,000 BTU/h | 12,100 BTU/h | 16.0 | 9.5 | $2,364 | 216623521 |
| Add-on 2.5 tonsMO1HE-H30B-2A + MAAHE-H36B-AA | AA · 14 1/2 in. | 30,000 BTU/h | 24,000 BTU/h | 30,400 BTU/h | 16,000 BTU/h | 15.3 | 9.3 | $2,880 | 216623522 |
| Add-on 2.5 tonsMO1HE-H30B-2A + MAAHE-H36B-BA | BA · 17 1/2 in. | 30,000 BTU/h | 25,000 BTU/h | 32,000 BTU/h | 22,000 BTU/h | 16.0 | 9.6 | $3,000 | 216623523 |
| Add-on 2.5 tonsMO1HE-H30B-2A + MAAHE-H36B-CA | CA · 21 in. | 30,000 BTU/h | 25,000 BTU/h | 32,000 BTU/h | 22,000 BTU/h | 16.0 | 9.6 | $3,000 | 216623525 |
| Add-on 3 tonsMO1SE-H36B-2A + MAAHE-H36B-BA | BA · 17 1/2 in. | 38,000 BTU/h | 29,200 BTU/h | 36,000 BTU/h | 28,600 BTU/h | 15.8 | 9.4 | $3,504 | 216623524 |
| Add-on 3 tonsMO1SE-H36B-2A + MAAHE-H36B-CA | CA · 21 in. | 38,000 BTU/h | 29,200 BTU/h | 36,000 BTU/h | 28,600 BTU/h | 15.8 | 9.4 | $3,504 | 216623526 |
| Add-on 4 tonsMO1HE-H48B-2A + MAAHE-H60B-CA | CA · 21 in. | 48,000 BTU/h | 34,400 BTU/h | 42,000 BTU/h | 30,000 BTU/h | 15.2 | 8.8 | $4,128 | 216684129 |
| Add-on 5 tonsMO1HE-H60B-2A + MAAHE-H60B-CA | CA · 21 in. | 56,000 BTU/h | 37,800 BTU/h | 45,000 BTU/h | 22,000 BTU/h | 16.0 | 8.5 | $4,536 | 216623527 |
| Add-on 5 tonsMO1HE-H60B-2A + MAAHE-H60B-DA | DA · 24 1/2 in. | 58,000 BTU/h | 36,000 BTU/h | 43,000 BTU/h | 29,500 BTU/h | 15.2 | 8.1 | $4,320 | 216623528 |
ENERGY STAR (heat at 8 °C, at -8 °C and maximum at -15 °C, SEER2, HSPF2) and NEEP (maximum heat at -30 °C), data by AHRI number, Oct. 8, 2026. LogisVert: Hydro-Québec formula, ENERGY STAR cold climate for all twelve combinations.
Measure above your furnace: here are the coils that fit.
Enter the clear height between the top of the furnace and the ceiling or plenum.
The clear height
- MAAHE-H24B-AA18 in. tall · 14 1/2 in. wide · 1.5 t, 2.0 t
- MAAHE-H24B-BA18 in. tall · 17 1/2 in. wide · 1.5 t, 2.0 t
- MAAHE-H36B-AA23 1/2 in. tall · 14 1/2 in. wide · 2.5 t
- MAAHE-H36B-BA23 1/2 in. tall · 17 1/2 in. wide · 2.5 t, 3.0 t
- MAAHE-H36B-CA23 1/2 in. tall · 21 in. wide · 2.5 t, 3.0 t
- MAAHE-H60B-CA27 1/2 in. tall · 21 in. wide · 4.0 t, 5.0 t
- MAAHE-H60B-DA28 in. tall · 24 1/2 in. wide · 5.0 t
MAAHE coil heights and widths: our product pages. A plenum or transition may add height depending on the furnace: we measure at the visit.
Same outdoor unit, another coil: the numbers change.
At 5 tons, the CA coil gives more certified heat at -8 °C; the DA coil keeps more at -30 °C. Pick a size: cards of the same size share the same scale.
AA coil · 14 1/2 in.
MAAHE-H24B-AARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
BA coil · 17 1/2 in.
MAAHE-H24B-BARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
AA coil · 14 1/2 in.
MAAHE-H24B-AARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
BA coil · 17 1/2 in.
MAAHE-H24B-BARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
AA coil · 14 1/2 in.
MAAHE-H36B-AARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
BA coil · 17 1/2 in.
MAAHE-H36B-BARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
CA coil · 21 in.
MAAHE-H36B-CARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
BA coil · 17 1/2 in.
MAAHE-H36B-BARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
CA coil · 21 in.
MAAHE-H36B-CARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
CA coil · 21 in.
MAAHE-H60B-CARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
CA coil · 21 in.
MAAHE-H60B-CARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
DA coil · 24 1/2 in.
MAAHE-H60B-DARuns down to -30 °C and gives 100% of its heat down to -25 °C, according to Midea
ENERGY STAR (8 °C, -8 °C, maximum at -15 °C) and NEEP (maximum at -30 °C), data by AHRI number, Oct. 8, 2026.
Same outdoor unit, different coil: the COP changes too.
Pick a model and a temperature: here is how many kWh of heat come out per kWh of electricity, from the NEEP list COPs, and what a kWh of heat costs at Rate D.
At -8 °C, heat of 15,200 BTU/h at the rated point (NEEP list).
COPs published by the NEEP list (ashp.neep.org, data by AHRI number, Oct. 8, 2026): rated at 8, -8 and -15 °C; at the coldest point, at maximum output, as reported by the manufacturer. Electric baseboard: about 100% efficient (NRCan, “Heating with Electricity”). Hydro-Québec Rate D in force April 1, 2026: 7.065¢/kWh up to 40 kWh per day, 11.142¢/kWh beyond, plus the access charge. A lab COP is not a bill: real use depends on the house and how it is used.
From $1,824 to $4,536 per Midea add-on.
The amount follows the certified heat at -8 °C of each outdoor unit + coil pair. Tap a combination to see the calculation and your application deadline.
Add-on 5 tons · CA
Add-on 5 tons · DA
Add-on 4 tons · CA
Add-on 3 tons · BA
Add-on 3 tons · CA
Add-on 2.5 tons · BA
Add-on 2.5 tons · CA
Add-on 2.5 tons · AA
Add-on 2 tons · AA
Add-on 2 tons · BA
Add-on 1.5 tons · AA
Add-on 1.5 tons · BA
The amount follows the certified heat at -8 °C of the exact combination, hence the AHRI number on the quote.
Since November 26, 2025, only ENERGY STAR certified units qualify.
You apply no later than 9 months after installation.
The rebate never exceeds 100% of the purchase and installation cost before taxes.
Source: Hydro-Québec, LogisVert residential participation guide v1.10 (Sept. 15, 2026) and eligible heat pump search tool, consulted Oct. 6, 2026; heat at -8 °C: ENERGY STAR, Oct. 8, 2026. Indicative amounts, confirmed by Hydro-Québec when you apply. Our LogisVert page
Keep the furnace or replace it all: the same EVOX G3 outside.
The outdoor unit is the same. What changes is what happens indoors. We look at your furnace’s age and condition with you at the visit.
| Criterion | EVOX G3 add-on | EVOX G3 central |
|---|---|---|
| Your furnace | It stays and takes over when needed | Replaced by the MAUSE indoor unit |
| Indoors | A MAAHE coil on the furnace | Modular unit in three blocks, six positions |
| Backup heat | Your furnace | Midea electric kit up to 25 kW, optional |
| Heat at -8 °C (ENERGY STAR) | 15,200 BTU/h to 37,800 BTU/h | 14,700 BTU/h to 45,000 BTU/h |
| SEER2 | 15.2 to 16.1 | 17.2 to 19.0 |
| LogisVert | $1,824 to $4,536 | $1,764 to $5,400 |
| Combinations in our catalogue | 12 | 6 |
Certified figures: ENERGY STAR by AHRI number, Oct. 8, 2026. Indoor unit and electric kit: Midea documents, as used on our MIDEA page.
What Midea built into the add-on.
The features Midea states for the EVOX G3 outdoor unit, and what to know about the coil.
In deep cold, the compressor gets medium-temperature vapor to raise the refrigerant flow and heat harder, according to Midea.
Midea states 100% of the heat down to -25 °C and operation down to -30 °C. The certified figures for each size are in the table above.
The ICE circuit cools the control board: Midea states cooling operation up to 50 °C, and 100% capacity up to 43 °C.
The variable-speed compressor adjusts its speed instead of stopping and restarting: steadier temperature and less noise, according to Midea.
The letters AA, BA, CA and DA give the coil width: 14 1/2, 17 1/2, 21 and 24 1/2 in. per our product pages. We take the one that lines up with your furnace.
Each outdoor unit + coil combination has its own certification: that number is used for the LogisVert application.
All twelve add-on combinations in our catalogue are ENERGY STAR cold climate certified.
Source: Midea EVOX G³ homeowner brochure and Midea Comfort Canada EVOX G3 page; Midea Building Technologies AtomX brochure (hvac.midea.com, file of March 7, 2025); certifications: ENERGY STAR, Oct. 8, 2026.
Eight things to know about the Midea add-on.
Tap a card to flip it: each number’s source is on the back.
- 01Coil18–28in.The room needed above the furnaceTap for the explanation01
Per our product data, the MAAHE coil is 18 in. (1.5 and 2 tons) to 28 in. (5 tons, DA) tall: that is the room needed above the furnace, on top of the plenum.
Our airgreen.ca product pages, Oct. 8, 2026.
- 022.5 t+38%The coil changes everything at -30 °CTap for the explanation02
At 2.5 tons, the BA or CA coil gives 22,000 BTU/h at -30 °C (COP 1.62), versus 16,000 BTU/h (COP 1.28) with the AA: same outdoor unit, very different heat.
NEEP list, data by AHRI number, Oct. 8, 2026.
- 033.0 t75%The best hold at -30 °CTap for the explanation03
At -30 °C, the 3-ton add-on keeps 28,600 BTU/h, 75% of its rated 8 °C heat; the 5-ton with the CA coil, 39%.
NEEP list, data by AHRI number, Oct. 8, 2026.
- 041.5 t2.06COPThe best COP at -15 °CTap for the explanation04
The 1.5-ton add-on has the series’ best COP at -15 °C, 2.06; the 2-ton, 1.80.
ENERGY STAR, data by AHRI number, Oct. 8, 2026.
- 05According to MideaDual fuelDesigned to keep the furnaceTap for the explanation05
Midea presents its A-coil on a furnace as its dual-fuel solution: with the Extreme Heat outdoor unit, heating from -30 °C to 24 °C outside and up to 16.1 SEER2.
Midea “Residential Heat Pumps” line card.
- 06Your furnace550–1,050CFMThe airflow the furnace must deliverTap for the explanation06
Per our product data, the coil is designed for 550 CFM (1.5 tons) to 1,050 CFM (4 and 5 tons): we check that your furnace blower can deliver it.
Our airgreen.ca product pages, Oct. 8, 2026.
- 07Thermostat24 Vor RS-485Conventional or communicatingTap for the explanation07
Midea lists a conventional or communicating thermostat for its A-coil, as for the EVOX G3.
Midea “Residential Heat Pumps” line card.
- 085.0 t45,000BTU/hCA or DA at -15 °CTap for the explanation08
At -15 °C, the 5-ton gives 45,000 BTU/h with the CA coil and 43,000 BTU/h with the DA.
NEEP list, data by AHRI number, Oct. 8, 2026.
Swipe to see the other cards, tap a card to flip it.
12 years on parts and compressor, if the system is registered in time.
Midea’s limited warranty for the first owner of a single-family home, registration within 60 days of installation. Pick your case.
on the compressor and on parts: first owner, single-family home, unit registered within 60 days.
on the compressor, and 5 years on parts, without registration.
on the compressor, and 1 year on parts, for any other use.
on the compressor and on parts, for the next owner.
On mideacomfortna.ca, within 60 days of installation. We show you how at start-up.
Midea requires installation by a licensed contractor. AirGreen: RBQ 5645-9605-01.
Labour and refrigerant are excluded from the Midea warranty, in plain words.
Source: Midea limited warranty for Canada (rev. 12.2024, September 2026 edition), linked from mideacomfortna.ca, consulted Oct. 6, 2026.
AirGreen — MIDEA PRO dealer

MIDEA PRO dealer: recognized expertise across the whole residential and commercial range.
Up to 12 years of Midea warranty on parts and compressor for systems registered within 60 days.
Specialized MIDEA technical training completed: installation to the manufacturer’s standards, advanced diagnostics and certified service.
Full command of MIDEA systems, from selection to start-up, including preventive maintenance and specialized repairs.
Priority access to original parts for after-sales service, cutting response times.
Privileged access to PRO programs and new technology, in Montreal, Laval, Longueuil, the North Shore, the South Shore and Montérégie.
We look at the furnace, the space above it, the blower, the ducts and the spot for the outdoor unit.
The size, the coil, the pair’s AHRI number and the indicative LogisVert amount.
Coil on the furnace, refrigerant lines, vacuum, charge, heat pump-to-furnace switchover setting, tests.
We give you the AHRI number and the papers for your Hydro-Québec application.
The EVOX G3 outdoor unit, on video.
Worth watching before the visit
The videos show the complete EVOX G3; the add-on keeps the same outdoor unit. We go over it again at the visit, in front of your furnace.
Worth watching before the visit
The videos show the complete EVOX G3; the add-on keeps the same outdoor unit. We go over it again at the visit, in front of your furnace.
Our latest EVOX G3 installs.
Our published articles mostly show full central systems. The add-on’s outdoor unit is the same EVOX G3: here are the latest six, out of 214 EVOX G3 installs published.






Five common beliefs about the add-on.
Answer, then read why.
“With an add-on, the furnace goes.”
False. The furnace stays: the Midea coil goes on top of it, and Midea presents it as its dual-fuel solution.
Midea “Residential Heat Pumps” line card.
“The coil width can change the heat at -30 °C.”
True. At 2.5 tons: 22,000 BTU/h with BA or CA, 16,000 BTU/h with AA.
NEEP list, data by AHRI number, Oct. 8, 2026.
“The coil goes above the furnace.”
True. So it takes 18 to 28 in. of clear height, depending on the model, per our data.
Our airgreen.ca product pages, Oct. 8, 2026.
“All twelve add-on combinations are ENERGY STAR cold climate certified.”
True. All twelve pairs carry the cold climate mark, each with its own AHRI number.
ENERGY STAR, data by AHRI number, Oct. 8, 2026.
“An add-on only cools.”
False. It heats, from -30 °C to 24 °C outside according to Midea; the furnace takes over when needed. In summer, it cools.
Midea “Residential Heat Pumps” line card.
What people ask us about the Midea add-on.
No question matches. Write to us or call 514 316-2973.
The EVOX G3 outdoor unit and a Midea MAAHE coil set on your existing furnace. The heat pump heats and cools; the furnace stays in place for the days the house needs it.
$1,824 to $4,536 depending on the combination, per Hydro-Québec’s tool. All twelve combinations are ENERGY STAR cold climate: $120 per 1,000 BTU/h of certified heat at -8 °C.
Because the coil changes the certified heat at -8 °C. At 2.5 tons: 24,000 BTU/h with the AA coil ($2,880), 25,000 with BA or CA ($3,000). At 5 tons: 37,800 with CA ($4,536), 36,000 with DA ($4,320).
The one whose width lines up with your furnace: AA (14 1/2 in.), BA (17 1/2), CA (21) or DA (24 1/2), per our product pages. We measure the furnace and the space above it at the visit.
The EVOX G3 outdoor unit runs down to -30 °C and keeps 100% of its heat down to -25 °C, according to Midea. With a coil on a furnace, the NEEP list gives 11,500 BTU/h to 30,000 BTU/h at -30 °C depending on the combination.
If your furnace is in good shape, the add-on keeps it as backup. If it is near the end of its life, the EVOX G3 central replaces it with the Midea indoor unit. We look at both with you at the visit. See the EVOX G3.
Yes: it is a heat pump. In summer, the same outdoor unit cools through the coil and your ducts.
For the first owner of a single-family home: 7 years on the compressor and 5 years on parts, or 12 years on both if the unit is registered within 60 days. Any other use: 5 years compressor, 1 year parts. Next owner: 5 and 5. Midea excludes labour and refrigerant.
Your Midea add-on, picked with you and installed by AirGreen.
We come and see your furnace, pick the size and coil with you, then you get a clear quote: the pair, the AHRI number and the indicative LogisVert amount.
Hydro-Québec does not solicit anyone by phone or door to door for LogisVert. A call “from Hydro-Québec” selling a heat pump? Hang up.
Sources checked on October 8, 2026
- ENERGY STAR, Certified Air-Source Heat Pumps (dataset w7cv-9xjt): twelve MO1HE / MO1SE + MAAHE combinations by AHRI number, data of Oct. 8, 2026.
- NEEP, Cold Climate Air Source Heat Pump List (ashp.neep.org): maximum heat at -30 °C, consulted Oct. 8, 2026.
- Midea Comfort Canada (mideacomfortna.ca): EVOX G3 page; Midea EVOX G³ homeowner brochure.
- Midea limited warranty for Canada (rev. 12.2024, September 2026 edition), consulted Oct. 6, 2026.
- Hydro-Québec, LogisVert residential participation guide, version 1.10, Sept. 15, 2026; eligible heat pump search tool, consulted Oct. 6, 2026.
- airgreen.ca product pages (combinations, coil dimensions, AHRI numbers), Oct. 8, 2026.
LogisVert amounts are indicative: Hydro-Québec confirms them when you apply. Prices on quote.
All 12 Midea add-ons, right below.
Filter by size, then open the product page: the outdoor unit + coil pair, the AHRI number and the indicative LogisVert amount.

