CONFORTO AT AT0824 Electric Boiler | 8 kW - 240V
The Conforto AT0824 is an 8 kW wall-mounted electric boiler (27,300 BTU/h at 240 V) that heats the water for a radiant floor, radiators or hot-water baseboards.
Model numberAT0824
514 316-2973 · sales@airgreen.ca
Quick facts
An 8 kW wall-mounted electric boiler to heat a dwelling with hot water
Who it suits: dwellings and small houses heated with hot water
Hot-water radiators are still part of many homes in Montreal and Longueuil. When the old electric boiler reaches the end of its life, the Conforto AT0824 offers a straightforward replacement: 8 kW at 240 V, or 27,300 BTU/h according to the manufacturer, in a cabinet that mounts on the wall.
It also suits smaller new projects: a bungalow getting a radiant floor in the basement, a condo with radiators, an addition tied into an existing loop. Conforto designs it for low-temperature radiant heating as well as high-temperature hot-water baseboards.
What it changes day to day
The AT0824 heats with two 4,000 W elements, in two stages. In mild weather, a single element is often enough; the boiler adds the second when the loop calls for more. It also alternates which element starts first, so the two take turns.
An immersion sensor at the heat exchanger outlet controls the stages and prevents short cycling. If you add an indirect water heater, the controller manages a separate domestic hot-water setpoint and gives it priority: the shower comes before room heating while the tank gets back to temperature. A load-management input also lets the electricity provider control the unit.
How it fits your home
Electrically, the AT0824 needs a dedicated 240 V single-phase circuit, with a minimum ampacity of 49.2 A and maximum protection of 50 A. On the water side, it connects with 1 1/4 in NPT fittings and requires a minimum flow of 2.7 gpm (for a 20 °F ΔT). It weighs about 70 lb (32 kg) as shipped. The 30 psi relief valve and the temperature and pressure gauge are included.
What AirGreen’s installation covers
We start with a free on-site estimate: condition of the loop, existing electrical circuit, wall location, and whether there is an indirect water heater. The written quote that follows states the boiler chosen and the loop components to add or replace.
For a replacement, our technicians drain the system, remove the old boiler, mount the AT0824, connect it to the piping and the panel, then fill, purge and commission it. We set the setpoints with you and remind you of the yearly maintenance required by Conforto’s limited lifetime warranty. AirGreen is a Montreal family business in operation for more than fifteen years, holding RBQ licence 5645-9605-01.
Are you in Montreal, Laval, Longueuil, on the North Shore or the South Shore? Ask for your free estimate and your written quote. Financing is available.
Hot-water heating for a dwelling or a small house
The AT0824 supplies a hydronic loop: radiators, hot-water baseboards or a radiant floor. At 8 kW and 240 V, it sits just above the AT0623 in the Conforto AT series.
- Replacing an electric boiler at the end of its life in a plex unit
- Hot-water radiators in a bungalow or a condo
- Radiant floor in an addition or a full basement
- A loop that also feeds an indirect water heater, with priority
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- Dedicated 240 V single-phase circuit: minimum ampacity of 49.2 A and maximum protection of 50 A, per Conforto.
- Minimum flow of 2.7 gpm through the boiler (20 °F ΔT): the circulator and piping must allow it.
- Wall-mounted boiler of about 70 lb (32 kg) as shipped: the chosen wall must be able to carry it.
- Staged control, without modulation; the manufacturer’s documents do not mention an outdoor sensor.
- Conforto limited lifetime warranty: indoor residential use in Canada, yearly maintenance required, labour and shipping excluded.
Manufacturer documents
Explore the range
Electric boilersSee allSame brand
CONFORTOSee all
Frequently asked questions
Can it replace an old electric boiler?
Yes, if its output suits the building. We check the output required, the existing electrical circuit (minimum ampacity of 49.2 A and maximum protection of 50 A for the AT0824) and the condition of the loop; the written quote states any changes to plan for.
What is element rotation?
The boiler alternates which 4,000 W element starts first, instead of always calling on the same one. The two elements take turns.
Does it work with an indirect water heater?
Yes. The controller has a separate domestic hot-water setpoint and gives the indirect water heater priority over space heating. The water heater is sold separately.
What warranty does Conforto offer?
A limited lifetime warranty: 5 years on the heat exchanger and the components installed by the manufacturer (section A), then the heat exchanger at no charge for the first 20 years and prorated after that. Indoor residential use in Canada; for commercial use, 2 years on parts and 10 years on the heat exchanger. Yearly maintenance is required.
What does your installation include?
The free on-site estimate, the written quote, mounting the boiler on the wall, the water and electrical connections, filling, purging, commissioning and setting the setpoints.
Your 8 kW Conforto boiler, installed by AirGreen
Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 19, 2026.
