CONFORTO AT AT2446 Electric Boiler | 24 kW - 240V
The Conforto AT2446 is the largest single-boiler size of the AT series: a 24 kW, 240 V wall-mounted electric boiler, 82,000 BTU/h according to the manufacturer.
Model numberAT2446
514 316-2973 · sales@airgreen.ca
Quick facts
24 kW of hot-water heating in a single wall-mounted boiler
The top of the AT series, in the same format
The Conforto AT2446 is the largest single boiler of the AT series: 24 kW at 240 V, or 82,000 BTU/h according to the manufacturer. It still keeps the same wall-mounted cabinet as the other models in the series, about 70 lb (32 kg) as shipped, with 1 1/4 in NPT water connections. For a large house or a small building, that is a lot of heat in little wall space.
Its four 6,000 W elements come on in four stages, with element rotation. An immersion sensor at the heat exchanger outlet controls the stages and prevents short cycling. The controller shows its values on 3 characters, handles freeze protection and a domestic hot-water setpoint with priority for an indirect water heater.
Which buildings it suits
Think of a large Longueuil house heated by radiators on three levels, a Montreal plex whose units share a hot-water loop, or a South Shore commercial space heated by a radiant floor. Conforto also covers commercial use in its warranty, with 2 years on parts and 10 years on the heat exchanger, while the limited lifetime warranty covers indoor residential use in Canada.
If 24 kW is not enough, the series continues with systems of two boilers in parallel, at 28, 32 and 40 kW. We compare those options with you rather than oversizing.
What to plan for
A boiler this size is planned from the electrical service. Conforto lists an element current of 100.0 A, a minimum circuit ampacity of 132.5 A and maximum protection of 150 A, at 240 V single phase. The loop, for its part, must supply at least 8.2 gpm to the boiler for a 20 °F ΔT.
The boiler does not modulate and the documents do not mention an outdoor sensor: the heating setpoint is therefore set to suit your emitters, radiators or floor, and we adjust it at commissioning.
What AirGreen’s installation covers
The on-site estimate is free: we assess the electrical service, the panel, the loop and its emitters. The written quote then states the boiler, the circulator, the components to replace and, where applicable, the electrical upgrade.
Our technicians mount the boiler, make the water and electrical connections, fill and purge the loop, check each of the four stages and set the setpoints. We also leave you the instructions for the yearly maintenance required by Conforto’s warranty. AirGreen is a family business established in Montreal for more than fifteen years, RBQ licence 5645-9605-01.
For a project in Montreal, Laval, Longueuil, on the North Shore or the South Shore, ask for your free estimate and your written quote. Financing is available.
The largest AT series size in a single boiler
The AT2446 heats the most demanding hydronic loops the series covers with a single boiler. Above 24 kW, Conforto moves to systems of two boilers in parallel.
- Large house heated by radiators on several floors
- Plex or small building whose units share a hot-water loop
- Commercial space heated by a radiant floor
- Replacing a 24 kW electric boiler
Specifications
From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.
What to know before installing
- 240 V single-phase supply: element current of 100.0 A, minimum circuit ampacity of 132.5 A and maximum protection of 150 A, per Conforto. The electrical service must be assessed first.
- Minimum flow of 8.2 gpm through the boiler (20 °F ΔT).
- Staged control, without modulation; the manufacturer’s documents do not mention an outdoor sensor.
- Conforto limited lifetime warranty for indoor residential use in Canada; for commercial use: 2 years on parts, 10 years on the heat exchanger. Yearly maintenance required.
- The indirect water heater is sold separately; the quote lists the circulator and the other loop components.
Manufacturer documents
Explore the range
Electric boilersSee allSame brand
CONFORTOSee all
Frequently asked questions
What if 24 kW is not enough?
Conforto offers systems of two boilers in parallel: AT2800 (28 kW), AT3200 (32 kW) and AT4000 (40 kW). We compare the options with you during the free estimate.
What electrical service is needed?
The boiler alone needs a 240 V single-phase circuit with a minimum ampacity of 132.5 A and maximum protection of 150 A. We check the capacity of the service and the panel; if an upgrade is needed, the written quote says so.
What water flow is needed?
At least 8.2 gpm through the boiler, for a 20 °F ΔT. The circulator and piping are chosen to deliver it.
Can it make domestic hot water?
Yes, with an indirect water heater sold separately. The controller gives it a separate setpoint and priority over space heating.
What warranty does Conforto offer?
A limited lifetime warranty for indoor residential use in Canada: 5 years on the heat exchanger and the components installed by the manufacturer (section A), then the heat exchanger at no charge for the first 20 years and prorated after that. For commercial use: 2 years on parts and 10 years on the heat exchanger. Yearly maintenance required; labour and shipping excluded.
The 24 kW Conforto AT2446, installed by AirGreen
Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.
Specifications from the manufacturer’s documentation, checked on October 19, 2026.
