CONFORTO AT AT1025 Electric Boiler | 10 kW - 240V

In stock

Conforto 10 kW, 240 V wall-mounted electric boiler: two 5,000 W elements, 34,100 BTU/h according to the manufacturer, for radiant floors, radiators and hot-water baseboards.

Model numberAT1025

10 kWoutput at 240 V
34,100 BTU/hat 240 V, per Conforto
3.4 gpmminimum water flow (20 °F ΔT)
240 V · single phase2 stages · 2 x 5,000 WZero emissions per Conforto
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

Model numberAT1025
ManufacturerConforto
Output10 kW (34,100 BTU/h) at 240 V
Elements2 x 5,000 W, 2 stages
Power supply240 V, single phase
Suggested fuse60 A
Water connections1 1/4 in NPT

A warm floor and well-tuned radiators with a 10 kW electric boiler

A 10 kW boiler for a home heated with hot water

Hot-water heating has its fans: gentle warmth rising from the floor, radiators that stay warm for a long time, no blowing air. The Conforto AT1025 supplies this kind of system with 10 kW at 240 V, or 34,100 BTU/h according to the manufacturer. It suits a Laval townhouse whose entire ground floor sits on a radiant floor, a South Shore duplex heated by radiators, or the replacement of a wall-mounted electric boiler of similar output.

Its two 5,000 W elements work in two stages, with element rotation. When the loop calls for little, a single element heats; the second joins during colder periods.

What to plan for in the house

Electricity first. The AT1025 connects at 240 V single phase on a dedicated circuit; Conforto lists a minimum circuit ampacity of 59.6 A and a suggested fuse of 60 A. Before proposing this model, we therefore check that your panel has the capacity needed.

Water next. The boiler connects with 1 1/4 in NPT fittings and requires a minimum flow of 3.4 gpm for a 20 °F ΔT. A 30 psi relief valve and a temperature and pressure gauge come with the unit.

Space last. Being wall-mounted, it weighs about 70 lb (32 kg) as shipped and frees the mechanical room floor for an indirect water heater, for example. The controller can manage that water heater with its own setpoint and give it priority. Its immersion sensor, at the heat exchanger outlet, prevents short cycling.

Your AirGreen quote

We visit at no charge to assess your electrical panel. You then receive a written quote that details the boiler.

Conforto requires yearly maintenance to keep its limited lifetime warranty: we explain it.

AirGreen is a family business established in Montreal for more than fifteen years, RBQ licence 5645-9605-01.

Let’s talk about your project

From Montreal to Longueuil, from the North Shore to the South Shore by way of Laval, ask for your free estimate and your written quote. Financing is available.

01 · What it is for

A 10 kW boiler for radiant floors and radiators

The AT1025 heats the water of a hydronic loop and sends it to the floors, radiators or baseboards. Conforto designs it for low-temperature radiant heating as well as high-temperature baseboards.

  • Radiant floor across a whole ground floor or basement
  • Townhouse or duplex heated by hot-water radiators
  • Replacing a wall-mounted electric boiler of similar output
  • A system that also makes domestic hot water with an indirect water heater
2 x 5,000 W in two stagesOne element is enough when demand drops; the second joins as needed, with element rotation.
Against short cyclingThe immersion sensor at the heat exchanger outlet drives the stages, according to Conforto.
LED display and freeze protectionThe controller shows its values on 3 characters and includes freeze protection.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

ManufacturerConforto
SeriesAT
TypeWall-mounted electric boiler for hot-water heating
Output (240 V)10 kW
Output in BTU/h (240 V)34,100 BTU/h
Power supply240 V nominal, single phase
Heating elements2 x 5,000 W
Stages2 (one element per stage, element rotation)
Element current (240 V)41.7 A
Minimum circuit ampacity (240 V)59.6 A
Suggested fuse (240 V)60 A
Minimum water flow3.4 gpm (20 °F ΔT)
Water connections (inlet / outlet)1 1/4 in NPT
Relief valve30 psi, included
Temperature and pressure gaugeIncluded
ControlStaged, no modulation; 3-character LED display; heating and domestic hot-water setpoints (priority); freeze protection
Controller inputsLoad management (LMC), flow switch, low water level
Dimensions on Conforto’s drawing (A to E)A 14 5/8 in (37.1 cm) · B 18 5/8 in (47.3 cm) · C 9 1/32 in (22.9 cm) · D 14 3/8 in (36.5 cm) · E 16 15/32 in (41.8 cm)
Shipping weightAbout 70 lb (32 kg)
Manufacturer warrantyConforto limited lifetime warranty: 5 years (section A); heat exchanger 20 years at no charge, then prorated; indoor residential use in Canada
Model numberAT1025
03 · Before installing

What to know before installing

  • 240 V single-phase supply: minimum circuit ampacity of 59.6 A and a suggested fuse of 60 A, per Conforto. We check that your panel can take it.
  • Minimum flow of 3.4 gpm through the boiler (20 °F ΔT).
  • No modulation: the boiler works in stages. The manufacturer’s documents do not mention an outdoor sensor.
  • The indirect water heater is sold separately.
  • Conforto’s limited lifetime warranty covers indoor residential use in Canada and requires yearly maintenance.
04 · Documents

Manufacturer documents

05 · See also

Explore the range

Same category
Electric boilers
See all
Same brand
CONFORTO
See all
06 · Questions

Frequently asked questions

Is it suited to a radiant floor?

Yes. Conforto designs the AT series for low-temperature radiant heating as well as high-temperature baseboards and radiators.

Does the boiler adjust to the outdoor temperature?

Conforto’s documents do not mention an outdoor sensor. The boiler follows a heating setpoint and turns on its two 5,000 W elements in stages, without modulation.

What electrical circuit is needed?

A 240 V single-phase circuit. Conforto lists a minimum circuit ampacity of 59.6 A and a suggested fuse of 60 A for the AT1025.

What is the manufacturer’s warranty?

Conforto offers a limited lifetime warranty: section A of 5 years on the heat exchanger and the components installed by the manufacturer; heat exchanger covered at no charge for the first 20 years, then prorated. Indoor residential use in Canada (for commercial use: 2 years on parts, 10 years on the heat exchanger). Yearly maintenance required; labour and shipping excluded.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

A 10 kW Conforto boiler for your hot-water loop

Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 19, 2026.