ADP HE31130C210B1622AP Evaporator A-Coil | 2.5 Tons

A 21 in ADP coil that lines up with your unit

Why cabinet width matters

A cased coil sits directly on the air outlet of the electric furnace or air handler. When both are the same width, the connection is simple, clean and easy to seal. When they differ, a transition has to be built. ADP’s HE31130C210B1622AP is therefore aimed first at 21 in wide units: its embossed cabinet is 21.0 in wide, 16.5 in high and 20.5 in deep.

For the same capacity, the HE series also offers a narrower cabinet. During the visit, we measure your unit and choose the width that fits, rather than adapting the job to the coil.

The HE31130C210B1622AP sheet

Its nominal size is 2.5 tons, or 30,000 BTU/h. It uses an E31 copper slab and piston metering on R-410A. The copper connections are brazed, with a 3/4 in ODF suction. The drain pan is UV-resistant, 450°F polymer treated with Microban antimicrobial additive. At the factory, ADP checks for leaks with helium and pressurizes the coil to 500 psi with air. It weighs 38 lb.

ADP describes it as multi-position: upflow, or horizontal to the left or right, converted on site from the original left-hand configuration (code 22). Downflow is not clearly confirmed for this model; in that case, we validate with the manufacturer before ordering.

In your home

The typical case: a split-level or cottage heated by a 21 in electric furnace, whose owners want air conditioning or a 2.5-ton central heat pump. ADP states that HE coils are compatible with both uses. With piston metering, we make sure the orifice suits the chosen outdoor unit. If the unit lies in the basement ceiling, the same coil installs horizontally, on the side required.

Sold alone, the coil has no efficiency rating of its own and is not eligible for the LogisVert grant. Its ADP warranty covers parts for 5 years from installation, with a possible extension to 10 years under the manufacturer’s conditions; labour is not included.

What AirGreen does

1. A free on-site estimate: measuring the unit, choosing the coil and its position.
2. A clear written quote before work begins.
3. Setting the coil, brazing the connections, connecting the drain and commissioning.

AirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 (ventilation, refrigeration and electrical). We serve Montreal, Laval, Longueuil, the North Shore and the South Shore.

Send us your unit’s width or book a free visit. Financing is available.