Bosch publishes no matching table by width: if the furnace is wider than the coil, the gap is closed with sealed sheet metal.
Bosch, BMAC manuals, BTC 770101101 D (04.2023) and C (03.2017)
BOSCH // BMAC coils
Which BMAC fits your furnace?
Pick the cabinet width of your furnace: the tool gives the BMAC of that width, with the height and weight Bosch publishes.
This page’s tool
| Model | Height | Weight |
|---|---|---|
| BMAC2430ANTD | 20 in | 45.6 lb |
| BMAC3036ANTD | 20 in | 45.6 lb |
| Model | Height | Weight |
|---|---|---|
| BMAC2430BNTD | 20 in | 48 lb |
| BMAC4248BNTF | 30 in | 74.3 lb |
| Model | Height | Weight |
|---|---|---|
| BMAC3036CNTD | 20 in | 51.8 lb |
| BMAC4248CNTF | 30 in | 74.3 lb |
| Model | Height | Weight |
|---|---|---|
| BMAC4248DNTF | 30 in | 78 lb |
| BMAC4860DNTF | 30 in | 86.4 lb |
Width, height and weight: Bosch BMAC R-410A manuals, BTC 770101101 D (04.2023).
The models
The comparison that matters
With a BMAC coil, your furnace keeps its blower and its heating; with a 5-ton BVA20 R-410A air handler, Bosch supplies the blower: up to 1,815 CFM (tap 5, at 0.5 in of water column), per its sheet.
Who brings what
Did you know
Bosch publishes no matching table by width: if the furnace is wider than the coil, the gap is closed with sealed sheet metal.
Bosch, BMAC manuals, BTC 770101101 D (04.2023) and C (03.2017)
The eight BMAC in our catalogue (ending NTD / NTF) are the R-410A version: an R-454B system needs Bosch’s version ending in BTA.
Bosch, BMAC manuals, BTC 770101101 D (04.2023, R-410A) and BTC 771303301 D (04.2025, R-454B)
The drain pan is not suitable for an oil furnace.
Bosch, BMAC R-410A manuals, BTC 770101101 D (04.2023)
Warranties
Sold and installed by AirGreen. In Montréal, Laval, Longueuil, on the South Shore and the North Shore.
RBQ licence 5645-9605-01: subclasses 15.8, 15.10 and 16. Gas and oil work is done by a licensed partner.
The right model is confirmed on site, with the full model number of your unit. Sold and installed by AirGreen.