THERMO 2000 VoltMax SCR VOLTSCR48060P3 Commercial Electric Boiler | 60 kW - 480V 3 Phase

A 60 kW, 480 V electric boiler, documented and certified for your commercial projects

For contractors and designers

When a new commercial building or an addition has a 480 V three-phase supply, the boiler is often chosen on paper, well before anything reaches the site. Thermo 2000’s VoltMax 60 lends itself to that. The manufacturer publishes an engineering specification, a manual and a brochure for the series, and this model delivers 60 kW, or 204,720 BTU/h, for a current of 72.2 A.

It heats the water loop of a commercial or institutional building: radiant floors, radiators, hydro-air coils. A second setpoint can supply an indirect water heater, with or without domestic hot water priority.

What the boiler brings to the project

• Published certifications: CSA C22.2 No. 165-92 and UL 834 (CSA mark for Canada and the U.S.), CSA B-51-14 tank, CRN registration, ASME Section IV “H”.
• Factory-supplied protection: control and power fuses and breakers, two limit controls (automatic and manual), installed relief valve.
• Controls ready for integration: BACnet IP or MS-TP, 0-10 Vdc signal for setpoint or output, Ethernet port with web page and email alarms.
• SCR modulation from 0 to 100% which, according to Thermo 2000, limits peak power demand.

Fitting the boiler into the building

In a new mechanical room, space is tight. The VoltMax is vertical and compact: Thermo 2000 requires 3 in of clearance on the sides and back, 24 in at the front and 32 in above, and it can sit on the floor. It weighs 310 lb (141 kg) and holds 11 US gal of water. Its four 1 1/2 in male NPT side connections tie it into the loop. The outdoor sensor is included and sets water temperature by the weather, between 50 °F and 200 °F (10 °C to 93 °C).

Two items remain to be included in the specification: the circulator and the expansion tank, which are not shipped with the boiler. The low water cut-off, for its part, is an option at 60 kW.

Our role on site

We start with a free estimate, on site or from the plans, followed by a written quote. On site, our technicians install the boiler, connect it to the loop, extend the relief valve discharge, make the electrical connection and mount the outdoor sensor. We fill and purge the system, set up the controller and leave it ready for the management system integrator, where applicable.

AirGreen is a family business established in Montreal for more than fifteen years, holding RBQ licence 5645-9605-01 in ventilation, refrigeration and electrical work. Thermo 2000 covers the tank for 10 years (limited warranty, closed-loop heating) and the electrical and mechanical components for 2 years.

Send us your plans

We carry out projects in Montreal, Laval, Longueuil, on the North Shore and on the South Shore. Ask for your free estimate and written quote; financing is available.