KINGHOME Ultra Heat R32 2-Zone Heat Pump | 36,000 BTU | Montréal, Laval, South Shore, North Shore
The Kinghome Ultra Heat 2 zones 36 000 multi-zone heat pump heats and cools 2 rooms with a single outdoor unit. ENERGY STAR cold-climate certified, it delivers 36,000 BTU/h at −8 °C, heats down to −30 °C and has an indicative LogisVert amount of $4,320 (only Hydro-Québec confirms the assistance granted). Installed by AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
2 rooms, one outdoor unit.
Figures come from the manufacturer’s data and the AHRI certification.
The parts that make a multi-zone system.
Tap a part to learn more.
Outdoor unit
One compressor for the whole house. It supplies up to 4 heads.
Base pan heater
A heater keeps the outdoor unit’s base pan free of ice below 1 °C and during defrost (NEEP).
Refrigerant lines
One pair of lines per head.
Indoor heads
One head per room, each with its own remote and temperature. The combination is chosen in the “Zones” menu.
Control
Each zone is set separately, also from your phone.
Turn rooms on and off. Watch the power being shared.
One outdoor unit supplies every head: when several rooms call at once, they share its capacity. Pick an outdoor temperature.
Tell us your rooms. We tell you if this size is enough.
Pick the number of rooms and their size. The estimate targets a −15 °C day; it is a guide, the real calculation is done room by room at your home.
The whole series at a glance: find the box that fits you.
Each box is a product: the outdoor unit’s size, and the number of heads.
At −15 °C, it still delivers 100 % of its rated capacity.
Tap a temperature: capacity, efficiency and the cost of one hour of heating.
At every temperature, cheaper than baseboards.
Cost of one hour at full output, for the same heat delivered. Hydro-Québec Rate D, second tier: 11.142 ¢/kWh.
The official ratings, on the same scales as before.
SEER2, HSPF2 and EER2 come from the AHRI certification.
A grant you can calculate, not guess.
The capacity at −8 °C. $120 per 1,000 BTU/h is the rate for ENERGY STAR cold-climate heat pumps (guide v1.10).
One multi-zone or several wall units? Both sides, honestly.
We compare both options on your floor plan during the estimate.
What to know before installing a multi-zone system.
Dimensions, wiring and lines, drawn. Then our six steps.
The outdoor unit, dimensioned
One circuit for the whole house
Published sound levels, on one scale.
We use the outdoor figure to choose where the unit goes.
Every number, and where it comes from.
Each line carries its source; a line with no published value is not shown.
The manufacturer’s documentation, as PDF.
Everything we have written about this system.
Two large spaces to heat like a main system
Some houses only have two zones, but two large ones. A single-storey home with an open-concept layout where the kitchen, dining room and living room take up the entire front of the house. A finished basement turned into a family room with a home theatre. A ground floor open to a mezzanine. In these layouts, two small heads aren't enough, and the question is no longer just supplementary comfort: it's whether the heat pump can carry the heating of these spaces through the winter. This 36,000 BTU two-zone KINGHOME Ultra Heat R32 multi-zone heat pump is designed for that role.
We recommend it for wind-exposed houses on the North Shore and the South Shore, extended single-storey homes in Laval and houses in Montréal where a finished basement stays cold all winter despite the baseboards.
36,000 BTU delivered at -15 °C
This is what sets this model apart: it keeps its full nominal capacity down to -15 °C. According to the values listed on NEEP for this combination with wall-mounted heads (AHRI No. 215708444):
- At -8.3 °C: 36,000 BTU/h, COP of 2.3, or 100% of nominal capacity.
- At -15 °C: 36,000 BTU/h, COP of 2.1, still 100% of nominal capacity.
- At -30 °C: 26,200 BTU/h, COP of 1.51, or nearly 73% of nominal capacity.
In other words, capacity doesn't drop between a mild day and a -15 °C day. For two large spaces, that's what lets the heat pump remain the main heat source for most of the winter, with the electric furnace or the baseboards serving as backup only during the most intense cold. The unit carries the ENERGY STAR cold climate designation and heats down to -30 °C.
Access to 18,000 and 24,000 BTU heads
The KM36X6O outdoor unit accepts four sizes of CHARMO multi-zone wall-mounted heads: KW09XQ19CDI (9,000 BTU), KW12XQ19CDI (12,000 BTU), KW18XQ19CDI (18,000 BTU) and KW24XQ19CDI (24,000 BTU). It's the first model in the series to offer the 24,000 BTU head. In two zones, we often combine a 24,000 BTU head in the open-concept area with a 12,000 BTU head in the basement or the primary suite: the total equals exactly the 36,000 BTU nominal capacity, and both zones can run at full output together. Two 18,000 BTU heads are another balanced option when the two spaces are similar in size.
Two zones today, up to four tomorrow
The KM36X6O can serve up to four zones. In a two-zone setup, two connections stay free on the outdoor unit. That's useful when the project is done in stages: you first take care of the two large spaces where you live, then add a head in a bedroom or an office later, without replacing the outdoor unit, if the total head capacity allows it. We choose the unit location and the line routing accordingly from the first installation.
The finished basement, a zone that deserves its own head
A finished basement is often the most neglected room in a house: cold and damp in winter, damp in summer. A dedicated head changes everything. In winter, it heats the room without relying on heat coming down from the floors above, which almost never happens. In summer, it dehumidifies and protects the finishes. We mount it high on a foundation wall or a partition, taking the joists and the ceiling height into account.
Efficiency and equipment
The system is certified at 21 SEER2, 10 HSPF2 and 12 EER2. The variable-speed rotary compressor modulates to match the demand of both heads, the electronic expansion valve regulates the refrigerant flow and smart defrost limits unnecessary defrost cycles. Each head offers vertical and horizontal auto louvres, 3D airflow, humidity control, Turbo mode and self-cleaning. Wi-Fi is included for control through the KINGHOME PLUS app or a voice assistant. The system runs on R-32 refrigerant, and the outdoor unit has MAX Guard anti-corrosion protection.
What we check before installation
A system that has to carry the heating of two large spaces calls for careful preparation. Here is what we validate during an assessment in Montréal, Laval, Longueuil, on the North Shore or the South Shore.
Electrical supply
The unit requires a 220 V supply, an MCA of 30 A and an MOP of 45 A. That's a serious electrical load: we check the capacity of the electrical service, the space in the panel and the load already connected, especially if the house is heated electrically and has an electric range, dryer and water heater. Both heads are powered by the outdoor unit, with no additional circuit.
Outdoor unit location
The unit measures 40.16 x 16.81 x 32.52 inches, and its sound level is rated at 63 dB(A). At that level, location matters: we avoid placing it near a bedroom window, a deck where you spend summer evenings or a neighbour's property line. We mount it on a sturdy wall bracket above the snow, or on a raised base when the wall isn't suitable, with free drainage for defrost water.
Piping
Each of the two heads is connected with its own pair of 1/4 and 3/8 inch lines. The basement line usually goes through the rim joist; the open-concept area line can run up inside a wall or in an exterior line cover. Both circuits are vacuumed and leak-tested before the valves are opened.
Drain
The 24,000 BTU head produces a lot of condensate in summer. Its drain has to keep a continuous slope to the outside. In the basement, gravity drainage is rarely possible: we install a condensate pump connected to an existing drain.
Certification and LogisVert assistance
Reference numbers: AHRI 215708444 and ENERGY STAR ID 3798994. This combination has an indicative LogisVert amount of $4,320, calculated according to the LogisVert rule ($120 per 1,000 BTU/h of certified heating capacity at -8.3 °C); eligibility is confirmed on the installation date. Only Hydro-Québec confirms the assistance granted.
Why go with AirGreen
- Salaried refrigeration technicians, with no improvised subcontracting.
- Civil liability insurance of $5,000,000.
- Warranty registration done by our team.
- After-sales service that knows your installation and how it's configured.
Request your free estimate: we assess your two spaces, check your electrical service and suggest the heads that suit each one.
Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor, on registered models.
What people ask us about multi-zone systems.
Can I heat one room and cool another at the same time?
No. On a multi-zone system like this one, every head works in the same mode, heating or cooling. Each room still keeps its own set temperature.
What happens when every room calls for heat?
They share the outdoor unit’s capacity: 36,000 BTU/h at −8 °C, 36,000 at −15 °C and 26,200 at −30 °C.
How many heads can I connect?
Up to 4 on this outdoor unit. This product is configured for 2 heads.
How much is the LogisVert grant?
$4,320. The grant never exceeds 100 % of the cost before taxes; apply within 9 months of installation.
Is it ENERGY STAR certified?
Yes, cold climate, ID 3798994.
Down to what temperature does it heat?
Down to −30 °C. At −30 °C, it still delivers 26,200 BTU/h with a COP of 1.51.
Is it noisy?
Indoors, the reference head goes down to 26 dB(A). Outdoors, 63 dB(A): we place the unit away from bedroom windows.
Why a multi-zone instead of several wall units?
One outdoor unit on the wall and one circuit. In return, the rooms share the capacity, and if the outdoor unit stops, every zone stops.
What does the warranty cover?
Our sheet lists 12 years on the compressor and 12 years on parts. AirGreen extended warranty: possible.
A multi-zone system is planned room by room. At your home.
We measure every room, draw the line route and choose the right head for each zone. The on-site estimate is free and the quote arrives within 24 h.
